I'm trying to loop through each row in a listbox on a userform and remove the value if it isn't equal to the year shown in a CBYear. i can't sem to figure out what to use in my for statement to point the VBA to the Row as it were
View 2 RepliesOn the form, I have a button to add files to a listbox (the box is bound to a worksheet). how to program a button to remove a line from the listbox and the worksheet? here is the code
View 3 Replies View RelatedThe compile errors were happening in the For i statement, interesting enough the compile error went away after I closed the demo/example worksheet that had it in there too...? Not sure if that was the exact fix/trick. Now comes the next error: Run-time error '13': Type mismatch on the line highlighted below.
What else can cause this Run-Time error?? or is there another way to carry the listbox result into that second column. I am starting to think that the Run-Time is because the value selected was not found in that second column, or I am looking in the wrg column.....
Private Sub CommandButton1_Click()
Dim lbVal As Long
If ListBox1.ListIndex = -1 Then Exit Sub
'Not sure that I need the next line. Listbox is a SingleSelect.
For i = ListBox1.ListCount - 1 To 0 Step -1
If ListBox1.Selected(i) = True Then
lbVal = ListBox1.Value
Column A has values increasing by 1 but not necessarily each row, i.e.
1 1 1 2 2 2 3 3 3 4 4 4 4 5 5 5 5 7 7 7 8 8 9 10 10 11 11 11 11 12 13 13 14 14 14
I have a listbox which I want to Initialize by listing these values but not duplicating them (so in this case it would contain 1-14). Here is the mindblowingly complicated code I currently have:
[Code].....
This gives me the list as it appears on the sheet but doesn't get rid of the duplicates for me.
I can add an item from one list box to another using the following...
[Code].....
But I want to be able to remove the item from the listbox by clicking it. Tried this but doesn't work!
[Code] ......
Sorry, should be a simple one...
I can add an item from one list box to another using the following...
I have 10 checkboxes,
When the checkbox is checked, add the cell next to it to t a listbox in another sheet. (in the sample, the result ,must appear in sheet "relatorio", inside the yellow cells)
When the checkbox is unchecked , remove that item from the listbox.
I have listbox with 1 column source range B6:B25
Some time I want to remove some items before print is there possible to remove such item from listbox as well as corresponding cell without deleting row
I am trying to loop through a listbox with the code below.
what is happening is; if there are 6 items, the msgbox will show 6 times, but always with the last item in the list. I have tried different modifications but can't get it. There are no headers in my listbox.
I have a list box that shows a range of cells (called emailrange). I want to add a Delete button that enables a selected value in the Listbox to be deleted if necessary (just the cell value not the row).
The code I have thus far is below: ...
I have working code that returns a row number within a for loop based on parameters I set.
Each time the for loop runs I would like to store this row number, then after the loop has finished, delete all stored rows.
Code:
for rowNum = 1 to x (some variable end row number which I already have worked out using End(xlUp).Row)
if x = y then
*storedRow = rowNum
end if
next rowNum
*
Lines with a * are the bits I can't work out. I've been trying to understand arrays by reading posts on what other people have done, but I can't fit (or fully understand) the reDims, or reDim preserves into my code. I've seen what appear to be quite complex ways involving uBounds and LBounds, but unfortunately I can't see how to use them.
All I want is to simply keep adding a row numbers to a variable, (i.e. row 2, 5, 20, 33, 120, etc) and then delete those specific rows.
I've got a listbox (ListBox1) and it lists 5 files. names are One, Two, Three, Four, Five (all .xls) and they're saved in C:/MyFolder
What i want to do, when a user clicks a button, for a code to only open the files that are selected. So for example, the user selects Three.xls and Five.xls - the code would need to ignore the others and open the selected files.
i have a multi select listbox that i want to be able to remove the selected items in one hit.
i have not been able to convert code for removing single selected items and could not find a working example.
this is probley the closest though cos its removing items it plays havoc with the listcount
Using Excel 10, Win 7, a User Form with list box control, I only need one column about 7 characters long. (At this point my horizontal scroll bar is taking up more room than the list box window so I'd really like to lose it). I don't see any property options for scroll bars to set.
View 2 Replies View RelatedI am trying to use VBA code to take the relevant selections made to populate a Listbox and to insert them back into a cell range within the worksheet. The code I have come up with so far is:
Private Sub cmdApply_Click()
Dim i As Integer
Dim j As Integer
Dim StartRow As Integer
Dim EndRow As Integer
Dim StartCol As Integer
Dim EndCol As Integer
Dim temp
[code]....
The code should take any data within the listbox and insert the individual text into subsequent cells across the specified cell range. However, I keep getting various error messages. I have tried permutations of the code which do run but which copy a single entry from the listbox across the whole cell range!
I have a form that an administrator will open to search for items needing approved (ie. status is "Submitted" and they'll be going in to confirmit). The datasource is a table. For these purposes I'll arbitrarily call it Table1 for ease. There are multiple columns in the table, and I'll set the column width to "0" for those I don't want displayed, so we'll call the columns to be displayed Col2, Col3, and Col22. There are two dependents, because Col2 is the Division, of which there are 3 (Central, East, and West). The administator will select their Division and the associated ListBox will display results for all locations having a item status of "Submitted". Col3 will be the branch name, and Col25 with be a total $ amount of the order. Cbo1 (ComboBox1) will house the Private Sub Change() for the macro after a division has been selected.
Thus far I have thought of using a loop such as:
Code:
Private Sub ComboBox1_Change()
For n = 1 to ws.ListObjects(1).DataBodyRange.Rows.CountIf ws.ListObjects(1).DataBodyRange.Cells(n,2) = Me.ComboBox1.Value and ws.ListObjects(1).DataBodyRange.Cells(n,25) Like "*Submitted*" ThenMe.ListBox1.AddItem = If ws.ListObjects(1).DataBodyRange.Rows(n).Value2End IfNext n
End Sub
I've got a mismatch in the the Value2 type for the .AddItem. Not sure how else to approach though.
I need a listbox or combobox in an excel form whos list is created from 2 ranges. for example first name is range a2:a500 second name is rangne b2:b500. the list box should list both coloums in a single list and return the row number. better still if it does not list blank ranges. i have never used a list or combo box before so please explain in terms a simplton can undrstand
View 7 Replies View RelatedI am trying to remove values in column D if the value in anyone of the rows in column D is zero, here is the macro, for some reason it only removes some of the zeros, if I run it multiple times it eventuelly removes all the zeros:
Sub Removezeros()
Dim rct As Long
Dim i As Long
rct = Application.WorksheetFunction. CountA( Range("d2", Range("d65536").End(xlUp)))
For i = 2 To rct
If Cells(i, 4).Value = 0 Then
Cells(i, 4).EntireRow.Delete
Else
End If
Next i
End Sub
Win7/2010
I have an array PeopleList(6,320) that contains
PersonID, FirstName, LastName, Email, Phone, Notes
What I'm trying to do. I have two separate requirements:
(1) To add the whole array to a listbox on form initialization - see Sub UserForm_Initialize()
(2) To clear the listbox and re-add only certain items based on what's typed in a textbox - see Sub txtSearchTerm_Change()
I have two errors:
Error 1 in UserForm_Initialize()
The listbox contents need transposing! It is displaying as
Code:
1 2 3 4 5
Tom Ben Heidi Julie Mark
Smith Jones Evans Simpson Petersen
x@yo.com a@bo.com c@do.com e@fo.com g@ho.com
02071001022 02071001026 02071001027 02071001028 02071001029
Friend
When it should be displaying as
:
Code:
1 Tom Smith x@yo.com 02071001022 Friend
2 Ben Jones a@bo.com 02071001026
Is there a way to transpose the array?
Error 2 in txtSearchTerm_Change()
I cannot find anywhere - even on MSDN - all the information I need how to correctly add a single record to a multiple-column listbox! What I'm trying is:
Code:
For i = 0 To UBound(SearchList) If InStr(1, SearchList(i), SearchTerm) 0 Then
With lstPeople
.AddItem
For j = 0 To UBound(PeopleList, 1)
.List(c, j).Value = PeopleList(j, i)
[Code] ......
How do I add a record to the listbox????
Full code for reference:
Option Explicit
Private PeopleList As Variant
Private SearchList As Variant
Private Sub UserForm_Initialize()
[Code] .......
I'm okay with Excel, but I'm just getting into utilizing VBA and I've been searching high and low for a simple VBA code that will remove/delete rows based off a single criteria without loop as there are over 40,000 rows. I tried a couple that I found onilne, and adapting them to my criteria range, but no luck. (All the ones that I found that work use loop and it takes about 15 mins to run through the entire spreadsheet)
I would like to maintain my first row as it's my headers. My single criteria is to remove all rows that have "NO" in column D.
I want to design a search form in excel that will lokk for the values in excelsheet and when match occurs then pop up those rows in listbox in the form. There are different criterias: one is Client_no or Policy_no ,If the person knows this no then he can simply type it in the textnox and press search and then the matching row will be displayed in listbox. If the user doesn't know the policy_no then he can try other things in the frame e.g First name,Last name,any part of address(so hopefully we'll use like operator here),Postcode.
View 10 Replies View RelatedUsing excel's text to speech I've put together a basic spreadsheet.
[URL]
Code:
Function talkit(Speech)
Application.Speech.speak (Speech)
talkit = Speech
[Code]....
I have a listbox that displays the results of a search (from A:A) but it only displays the data from column A in my sheet. I would like to know if it is possible to display the data for the entire row in my listbox, is this possible?
Sub Locate( Name As String, Data As Range)
Dim rngFind As Range
Dim strFirstFind As String
With Data
Set rngFind = .Find(Name, LookIn:=xlValues, lookat:=xlPart)
If Not rngFind Is Nothing Then
strFirstFind = rngFind.Address
Do
If rngFind.Row > 1 Then......................
I have a string of text in cell A2. In cell B2 of my spreadsheet is a formula that calculates a number based on the text string in cell A2.
I want to write a VBA loop that removes a single character from the cell A2 string, then calculate the new value in cell B2. I want this loop to continue until the value in B2 falls below a set value (in this case 60).
My code so far
Sub trim_text()
Dim mytext As String
Dim myanswer As Integer
mytext = Range("A2")
myanswer = Range("B2")
Do While myanswer > 60
mytext = (Right(mytext, Len(mytext) - 1))
Loop
End Sub
This obviously does not work. In my excel table I have a formula in cell B2 to calculate "myanswer" will this work, or does that code have to be placed into the VBA code?
I have a text box that I would like to populate with the total number of lines used by a listbox.
I tried:
i would like to paste also the rows that selected from listbox i use a userform and also use multiselect listbox
Code:
Private Sub frmstartbtn_Click()
Dim lItem As Long
With Me.frmListBox1
[Code].....
I have a listbox that is currently populated via the following code, designed to give a unique list with no repeats.
Code:
Sub UserForm_Initialize()Dim UniqueList() As String
Dim X As Long, y As Long
Dim r As Range, rAll As Range[code].....
This code works fine. NOW, what I need to do, is set individual labels, based on the values in the listbox, BUT, here is the kicker - I don't want to select any of the listbox values. I know there will be seven rows in the listbox that correspond with seven labels.
What I nede to do, is set the first label.caption as the first row in the listbox. The second label as the second row, etc. The listbox only has one column, and I have tried the following code, but it doesnt work.
Code:
With UserForm2 .Label1.Caption = .lbxParalegal.List(0, 1)
End With
I have a listbox on a userform and dependent on which of the 9 values they select, I want to delete the rows in a range that do not contain the string.
I can get the solution using a match on the listbox items but not the reverse, i.e. delete non matches, dependent upon the variety of values that can be selected.
I could potentially use a filter to drop them out, is this the best way? Always struggled trying to build multi filters.
I have two files and I need to compare them. The two files will be store in a listbox an I have to make the lines that are different with another color or select them so it will be easy to see the diferences. It is for one project that have to be ready tomorrow
View 8 Replies View RelatedI am using the following code to remove an entire row if a specific cell in that row contains "remove":
iLastRow = Cells(Rows.Count, "D").End(xlUp).Row
For i = iLastRow To 1 Step -1
If Left(Cells(i, "D").Value, 4) = "remo" Then
Rows(i).Delete
End If
Next i
However, from what I can see, it starts from the bottom and look upward, removing each line as it finds it. The problem is, there could be upward of 500 lines that need to be deleted. This coding looks and removes lines one at a time and can take a while. Is there any way I can get this done faster?
During the previous steps of my macro, I sort the column (Column D) that has the "remove" in it, so all of the "remove"s are adjacent to each other in Column D of my file.