I have the following code, but it takes longer than expected to run. Is there anyway to speed this up? I am not sure if autofilter is a option. I just want to search through range A16:Z16 and if the word "FALSE" exists delete the entire column. The word "TRUE" is the only other word that would exist in range A16:Z16
[Code]....
I need my macros to search for the word "Cancel" or "Cancelled" in columns "T" and "U". Once found, I need the macros to make that entire row an opaque shading.
There will be other wording in these cells that contain "Cancel" or "Cancelled". Is it possible for the macros to search in the sentence and find the words "Cancel" or "Cancelled"
I started on the code below but am stuck.
I have a spreadsheet that contains data that needs to be copied over to a new worksheet if it contains a Date. For instance, if a Date exists in column F on worksheet1, I want to copy the entire row's contents from worksheet1 to the next empty row on worksheet2.
As it stands now, the data ends on row 67 in worksheet1 and ends on row 221 in worksheet2. So, if there is a date in F30, I would like to copy all of row 30 and past it into row 222 on worksheet2.
In range A1:A300 I have a lotof words. What I want is to delete entire row if the cell value is Open date
View 3 Replies View RelatedLooking to write a macro to delete an entire row if the word GROWTH is found in any cell under Column C.
View 9 Replies View RelatedI need a formula to check sheet 1 column N and to copy the entire row if the cell in column has the word NO.
The row has to be extract in sheet 3.
I have working data on list sheet and added data on compiled sheet.
I need to match duplicates and delete these rows from compiled sheet.
I've tried coping to the list sheet and use "Remove Duplicates", but it rids me of the data that has been processed and has fills applied.
I'm looking for a macor that can do this work for me without losing data on list sheet.
This data reaches into the thousands and I'm looking to run this off the CASE column.
My worksheet has two sheets which has daily continued data. I want to copy two entire columns E and F from Sheet 1 and then in Sheet 2 I want to find a particular word "80 Percent" and then insert two new Entire columns before that word. And after that I want to paste that copied columns of sheet1 in those newly created columns of sheet 2. Is it really possible because the cell reference of the word "80 Percent" in Sheet 2 will change daily. How to create the macro codes for this.
Find attached file : IRCS1.xlsx
I am trying to do, is paste a word in front of text that is already residing in cell throughout an entire column, and then automate this process by creating a macro that will do the same thing for me throughout an entire column. To best explain this, it woudl be like if you have a column 100 rows/cells long, and every cell already contains data. I need to insert something in front of what lies within each cell.
View 9 Replies View RelatedI have two worksheet. One worksheet (ws1) contains a list of item I want. The other sheet (ws2) contains multiple columns where the header (row 6) is named by item name.
I have the following code which deletes the entire column if the header name is not in the list contained in ws1 :
VB:
Sub delete_col()
Dim wanted As Boolean
Set ws1 = Workbooks("test1").Sheets("aaa")
[Code]....
First of all, this loop does not work properly since deleting the entire column shift them on the left, so when I first analyze column 11, if I delete it and then analyze column 12, the real column 12 now became column 11 and so on...
Secondly, this code is pretty slow. I am pretty sure I don't have to loop through my initial item list everytime I do Instr on a new column.
I have columns
Row 1 is heading..
IF Column C doesn't have data in entire column then delete C D E F
IF Column D doesn't have data in entire column then delete D E F
IF Column E doesn't have data in entire column then delete E F
IF Column F doesn't have data in entire column then delete F
Same way for heading NN's
IF Column G doesn't have data in entire column then delete G H I J K L M N
IF Column H doesn't have data in entire column then delete H I J K L M N
IF Column I doesn't have data in entire column then delete I J K L M N
IF Column J doesn't have data in entire column then delete J K L M N
IF Column K doesn't have data in entire column then delete K L M N
IF Column L doesn't have data in entire column then delete L M N
IF Column M doesn't have data in entire column then delete M N
IF Column N doesn't have data in entire column then delete N
i want to delete entire row if D2:D10000 has a numeric value e.g .111 to 100000.1114
View 4 Replies View Relatedi want to delete entire row if Column C2:C1000 are blank
e.g if range c2:c100 have data then delete the rows C101:C1000
I have fixed headers on row 16, from columns A-AC.
I want to be able to delete the entire column, if the row has a certain string, such as "Chart ID" .
I also want to expand it to include other strings such as "Month" and "Source" . So if it contains any of these words, the columns should be deleted. It should be an exact match (as other headers contain the word "month").
I am using the following macro to delete "completely empty" rows. I also need to delete some rows if a cell in column B has no value. How would I change this macro?
' DeleteBlankRows
Dim r As Long
Dim C As Range
Dim Rng As Range
On Error GoTo EndMacro
Application.ScreenUpdating = False
Application.Calculation = xlCalculationManual
If Selection.Rows.Count > 1 Then
Set Rng = Selection
Else
Set Rng = ActiveSheet.UsedRange.Rows
End If
For r = Rng.Rows.Count To 1 Step -1
If Application.WorksheetFunction.CountA(Rng.Rows(r).EntireRow) = 0 Then
ActiveSheet.Rows(r).EntireRow.Delete
End If
Next r
EndMacro:
Simple code that can delete entire row if certain criteria is met in a single cell
Example
I have a bank statement where under a first column (DATA TYPE), the cell could contain either "DATA" or "TOTAL"
How can I delete the rows contain the word "TOTAL" assuming the column is already sorted.
I need automatically deleting of whole row based on cell value, if value of cell which is in h:mm format, is less than or equal to 2:00 (h:mm)
So far I got.
Code:
Sub FillDownFormula()
Code:
Range("L2").Formula = "=RC[-3]-RC[-2]"
Range("L3").Select
Columns("l:l").Select
Selection.NumberFormat = "h:mm"
Dim rng As Range
[Code] .........
Is there a way to delete any text or formula from an entire row, based on column A? In my spread sheet I have multiple rows where column A is blank, but column's F, G, and H have formulas in them. I would like to use VB or any other method that would be best to clear the contents of all the rows where column A is blank.
View 6 Replies View RelatedDelete entire Row if cell in column contains "Dog" in it.?
Example,
duck321
dog123
cat123
dog123
duck321
cat123
so after it would look like this
duck321
cat123
duck321
cat123
Does anyone have a macro that will delete entire row if column a matches column d
View 6 Replies View RelatedI have tried several methods to delete the entire row if the cell in column 'A' is blank ...
View 9 Replies View RelatedI've seen a few examples of macros to delete the row if the first letter is something, but not if the first 2 is equal to something.
I'm looking to go thru every row that contains data and look in Column B to see if it starts with P4 or P5. If that's true, then delete the entire row.
If cells in column A3:A10000 are blank / unpopulated I would like to delete the blank rows.
View 6 Replies View RelatedI'm using the following code to delete rows that I don't want to include and I've ran into some more things that need to be deleted...
For lLoop = RngCol.Rows.Count To 2 Step -1
Select Case RngCol(lLoop, 1)
Case " Date:", "Skill:", "Agent Name", "~*", "*Train*"
RngCol(lLoop, 1).EntireRow.Delete
End Select
Next lLoop
An example of "~*" would be: ***SICARII***
An example of "*Train*" would be: Ozgrid Train1
It's not recognizing these new cases. Do I have to utilize FIND? (since CTRL+F does work with the given cases)
with performing the following tasks with VBA:
1). For each cell that in the range that has a Red background delete the entire column
I have attached a sample spreadsheet where I have tried to do this. It's not quite working. It does not seem to work when there are RED cells next to each other.
I know that I can do a simple thing like column("A:A"), but I'd rather have it in a loop as in the sample code, in case the columns change in the future.
2). The second task is to delete the rows in the spreadsheet where the first cell in the row is a blank.
I need an easy code that searches all of column A and deletes the entire row if the cell has the value "-". It needs to find the last row of data using something like LastRow = Range("A" & Rows.Count).End(xlUp).Row
View 4 Replies View RelatedIs there a macro to delete an entire row if a duplicate entry appears only in a certain column.
1. Look for the column header with the name "File Number"
2. Anytime the same number under the "File Number" column appears more than once in that column, keep the row that contains first occurrence of that number buy delete the entire row anytime that number is repeated in another row in that same column.
This is regardless of what is contained in the other columns. For example..let's say these cells contained this data...
B1 - UTE00225
B2 - UTE00546
B3 - UTE65513
B4 - UTE00225
B5 - UTE00225
In this case, I would want to keep rows 1, 2, and 3. But, I would want to delete rows 4 & 5 because the number "UTE00225" has already appeared first in B1. I'm using Excel 2003.
I need create a macro to perform the following - I don't know if it needs to be an Excel macro or via VB. This is to speed a process up and eliminate any spreadsheet messing around for our "admin" staff - they are not good with excel at all!
So, I have a daily/weekly down load of a spreadsheet (exported from access).
* I want to copy the values of column AK to A
* Then delete all entries in column D that equal 19, 20 and 6
* Then delete all entries in column AL that equal "A","B","C" or "D" but not "E","F" or "G"
* Then delete entire rows where the value in column A is a duplicate within the list
I will call this spreadsheet, for the purpose of this exercise, the "Master". I now have another spreadsheet with values in that should relate to values in either (or both) columns A and B in the "Master". I need Spreadsheet 2 values to be highlighted as cross checked in the "Master" and then all those in the "Master" that do not appear in the 2nd S/S will be normal white cells thus showing that they need to be chased by our Admin staff.
i want to delete entire blank row from column C2:C300 i mean if i have data c2:c100 then c101:c300 delete entire blank rows
View 4 Replies View RelatedHow can I hide the word false. My report looks funny with false all over the place.
View 5 Replies View Related
