VBA To Copy Entire Row If Date Exists In Column F
Dec 10, 2012
I have a spreadsheet that contains data that needs to be copied over to a new worksheet if it contains a Date. For instance, if a Date exists in column F on worksheet1, I want to copy the entire row's contents from worksheet1 to the next empty row on worksheet2.
As it stands now, the data ends on row 67 in worksheet1 and ends on row 221 in worksheet2. So, if there is a date in F30, I would like to copy all of row 30 and past it into row 222 on worksheet2.
View 9 Replies
ADVERTISEMENT
Apr 9, 2014
I have the following code, but it takes longer than expected to run. Is there anyway to speed this up? I am not sure if autofilter is a option. I just want to search through range A16:Z16 and if the word "FALSE" exists delete the entire column. The word "TRUE" is the only other word that would exist in range A16:Z16
[Code]....
View 6 Replies
View Related
Mar 29, 2008
I require a row of details to be copied to another worksheet by typing in a unique ID using a macro so Sheet 1 is a data base of items (every item have a unique code like 1001, 1002 etc) and sheet 2 has a table, and next to the table is a cell, which i need to work like a search engine.
i need to be able to type the unique id in a cell, in sheet 2, then click an Add command Button. This button then finds the unique id in sheet 1, and copies all the items details in the same row, into sheet 2 in the table, then i require the search engine to be cleared for the next item to be added. (Assumed Experience:Below Average, I know few formulas and know very basic macros)
View 2 Replies
View Related
May 1, 2014
I need the macro to look at cells B9:B84 on the Sheet1 tab of the Cost Template. If it finds an x I need it to copy the 3 cells to the right of the x and paste them in a template. For example if it sees an x in cell B9 it would copy cells C9, D9 and E9, open the Purchase Order to the Detail tab, then paste it to cells B3, C3 and D3. It would continue looking for an x down to B84. So if it found 5 cells with x, it would give me 5 instances of the Purchase Order with 3 cells pasted into each.
I've attached my Cost Template and the Purchase Order it needs to copy to. In the Cost Template is a macro called Create_PO. This is what I was trying to alter to make this happen. I can't seem to get it right! FYI in case it matters, I had to change the Cost Template from .xltm to .xlsm in order to upload it on this site.
View 11 Replies
View Related
Mar 17, 2008
way to search for a value in a cell (an unique one) using an input box and then if the value is found copying the whole row of the cell onto a new worksheet in the next available row within a table.
I am currently using the following archaic codes:
x$ = InputBox("Please Enter Catalogue Number")
For i = 4 To 500
If Sheet2.Cells(i, 1) = x$ Or Sheet2.Cells(i, 7) = x$ Or Sheet2.Cells(i, 8) = x$ Or Sheet2.Cells(i, 9) = x$ Then
Sheet1.Cells(6, 1) = Sheet2.Cells(i, 1)
Sheet1.Cells(6, 2) = Sheet2.Cells(i, 2)
Sheet1.Cells(6, 3) = Sheet2.Cells(i, 3)
Sheet1.Cells(6, 4) = Sheet2.Cells(i, 4)
Sheet1.Cells(6, 5) = Sheet2.Cells(i, 5)
Sheet1.Cells(6, 6) = Sheet2.Cells(i, 6)
End If
Next i
End Sub
this has the problem that i can't fit it to the next available row and have to be specific for each row.
it would also be great if i could put a messagebox in cases where the data is not found, basically saying that the item does not exist and if a simple excel Ctrl+F button or something similar could be attached to the msgbox so that the item can be searched and then added to the next available row.
View 9 Replies
View Related
Jan 5, 2008
I need a formula to check sheet 1 column N and to copy the entire row if the cell in column has the word NO.
The row has to be extract in sheet 3.
View 9 Replies
View Related
Dec 5, 2008
I want to open the workbook "Invoice.xls" from the path: D:2008DecemberWorkflow
After opening this workbook, I would like to go to the sheet "Raw Data" and then copy the entire Raw 10. And close the workbook.
View 29 Replies
View Related
Dec 3, 2008
I have a column (A) where there's a date in each cell. Currently it is formatted as category "text". All entries where initially entered as 'yymmdd', but using category "number". Beacause of that all zeros in the year disappeared, so now they are shown as "ymmdd".
Can someone show me/tell me how to convert all these dates from category "text", to category "date", using format "yymmdd"? I have tried again and again and again, but can't make it work. I have attached a sample of the sheet.
View 4 Replies
View Related
Jun 9, 2009
I want to highlight an entire column based on whether a cell in that column is equal to today's date.
I know how to write a loop that cycles through all of the columns until it finds today's date and then modify the column's properties, I was wondering if there was an easier way to do it. Also, I want the highlighting to be temporary meaning it should not save.
View 9 Replies
View Related
Nov 24, 2011
I am trying to copy the entire row based on values in column A. I have 13237 rows of data. Column A is grouped into about 200 categories with corresponding data in B-F. I would like this to automatically copy the data into new tabs based on the groups in column A. I would also like the tab to be renamed to the value in column A.
M195_-_Subinventory_Item_Locato ABCDEF1LocatorItemSERIAL_NUMBERLOT_NUMBERON_HANDUOM201
.REEF..22700300100 228136EA301.REEF..22643400000 331122EA401
.REEF..K20-745-000 531124EA501.REEF..K20-618-000 531132EA601
.REEF..22747300000 1122111EA701
[Code] .........
View 9 Replies
View Related
Jun 12, 2009
i need a macro that will allow an entire row from one sheet be copied into a new sheet.
so basically here is what needs to be done:
1. from my active sheet, look in Column 'D', select all rows in in column D if it has the word "Confirmed" in it
2. create a new sheet and paste all those selected rows to this sheet
3. delete this transfered data from sheet 1
4. in the new sheet, i need to add in titles as follows in columns A - O:
Ticket
OrgCode
Event
Event Status
Project Type
Project Status
Start Date
End Date,.....................
View 9 Replies
View Related
Mar 27, 2014
I am trying to find a way to copy the contents of an entire row to a new sheet in a workbook based on the value of a column, specifically column K with the value of "good". There are 3 sheets that im searching. This is where I run into problems. Im looking to start with sheet1, and copy all rows deemed "good" into entries on sheet 4. Then search sheet2 and copy all relevant entries into the next available row on sheet4, and then repeat on sheet3.
View 2 Replies
View Related
Jul 2, 2007
How to copy an entire column having numbers and words on every single cell into another column but only copying numbers, not words.
View 9 Replies
View Related
May 19, 2014
I have an Excel database of department contracts with a Master worksheet. I have created a worksheet tab for each of the departments. Column G has a dropdown list for each department. When I enter a new contract onto the Master I want it to auto copy to the coordinating worksheet based on the selected department.
If possible I would also like it to enter the newest contract would enter into the coordinating Contract Party entered into column D. (ie... If Hospital A is entered in column D on master, the new entry on the worksheet being copied to will be entered under the last Hospital A, if Hospital B is entered on Master it copies under Hospital B). If this isn't possible then I am not too worried about that part.
I have attached a blank version of the file. Current Master 5-15-14.xlsx
View 3 Replies
View Related
Jul 25, 2014
I am trying to write a formula where the column header of the row in which a value other than 0 exists, will display for each instance (row) where a value exists in an array spanning 3 columns. So the result cell could be any of the three column headers, or a combination thereof.
I started the formula in P2 of the GL Detail-2012 tab. File attached.
Here is what I started: =INDEX($M$1:$O$1,SUMPRODUCT(COUNTIF($M$2:$O$67756,))). Not working.
View 7 Replies
View Related
Jul 22, 2014
I would like to display the column header of the row in which a value other than 0 exists in a cell for each instance that value exists in an array spanning 3 columns. So the result cell could be any of the three column headers.
I started the formula in P2 of the GL Detail-2012 tab. (FILE TOO BIG)
Excerpt:
Resin Sand Eliminated Segment
- (12,896.65)-
- (6,570.85) -
- (11,503.80) -
- (13,188.50) -
If there is any value other than 0 in Resin, Sand or Eliminated columns, return that column's header under Segment.
Here is what I started: =INDEX($M$1:$O$1,SUMPRODUCT(COUNTIF($M$2:$O$67756,)))
View 2 Replies
View Related
May 9, 2009
The workbook I have created will allow user to set up records for customer pricing. The code below is the module that will check if the file already exists and if so it will add the new record to that file and If it does not exist it will go to a nother module to create a new workbook.
View 3 Replies
View Related
May 22, 2008
I have two sheets
sheet1 and sheet2
What i want to do is this
if (a1 in sheet1) is found in (e1:e30 in sheet2) to copy cell from collum C (row which the value was found in) to (a4 in sheet1) if there is more then one then copy the next one to a5 in sheet1 etc
I have tryied vlookup hlookup but this does not work
View 5 Replies
View Related
Jun 17, 2009
I have a spreadsheet with columns set up like this: RowName, Date, Value1, Value2, Value3 etc. The date is in format YYYYMMDD. What I am trying to do follows, in some sort of pseduo fashion.
View 2 Replies
View Related
Oct 11, 2006
Is it possible to search a directory looking for a particular file, then if found, copy the directory and all its contents to another location?
it should be noted that not all of the files will be *.xls.
View 3 Replies
View Related
Jul 24, 2009
The whole "story" is explained, in details, inside the attached WB.
View 3 Replies
View Related
Dec 11, 2011
I'm trying to create a questionnaire and in each question you got to rank the answers 1, 2, 3 and 4 according to your preferences.
So I'm trying to use data validation to allow ranges between 1 and 4 and at the same time I'm trying to use =countif($A$1:$A$20,A1)=1 to prevent repeating selections but my problem is that with the data validation tool I can only select one of those options either allowing whole numbers between 1 - 4 or allowing custom and using =countif($A$1:$A$20,A1)=1.
Is there a way to do both?
View 6 Replies
View Related
Sep 21, 2007
I have serial numbers say 1 to 100 in column A. In column B i have values which are text and numbers combined. In column C I have similar values as in B.
Now, if any value in Column B appears in Column C, then in Column D It should tell me Yes or No or 0 or 1.
I basically want to know whether any value from Column B exists or not in column C. I tried Countif and Vlookup but didn't work.
View 9 Replies
View Related
Dec 4, 2012
My data looks like this in one sheet:
A
2
B
C
D
1
E
F
3
G
H
I
Where A is associated with 2 other letters, B and C. D is associated with one other letter, E, and F is associated with 3 other letters. I want an automated way to paste this into 2 columns in a new sheet, like this:
A
B
A
C
D
E
F
G
F
H
F
A
2
B
C
D
1
E
F
3
G
H
I
View 2 Replies
View Related
Apr 28, 2009
I have a 3 column table, the first column is always populated with email addresses, the second column will have secondary email addresses if that person has one, I want a formula in the third column to have the secondary email address if it exists, if it doesn't I want it to have the address from column one.
View 4 Replies
View Related
Jul 15, 2014
I have a cell with data separated by hashtags and the letter 'x'
For example #1001x1 refers to a product code and x1 being the quantity.
#1002x2#1003x1# would become:
CODE
QTY
CODE
QTY
1002
2
1003
1
I'm currently using the code:
[Code].....
Sometimes there will be files when there will be lots of codes to delimit, but sometimes there will be no codes to delmit.
So when there reference will only be #1001x1# the above code will try and delimite the next column along (column G) but there is nothing there to delimit and the error code "No data was selected to parse" pops up.
What I'm trying to ask is, is there a way to make a macro that only delimit columns with data.
View 4 Replies
View Related
Dec 23, 2013
I have a list in a column and just want to count how many of each entry exists and place that number in another list:
Column A Column B Column C
abogado 4 abogado
abogado 7 mammamia
abogado 8 trifecta[code].....
An image is here: 12.23.2013-13.59.36 - joezeppy's library
I want to create a table that lists the number of entries for each cell in column a and then lists the entry next to it. Can I use a pivot table or something?
View 3 Replies
View Related
Jun 8, 2006
i need a formula that tells me if a value exists in a column. for example if there is a value in a cell in the b column of 23 no matter where it is, i want cell c25 to return the word "yes".
View 2 Replies
View Related
Oct 2, 2007
I'm trying to do a formula without using a marco. The formula would do the following:
- Highlight value in column A if the value is found in column B and on the same line value in column F and I are equal to zero;
- Value in column A could match many value in column B
I tried everything I know but can't seems to make it work.
View 9 Replies
View Related
Apr 6, 2012
I am currently using this formula to count dates between 2 date periods If specific condition exists.
=COUNTIFS(
Data!S1:S100000,"*KP*",
Data!X1:X100000,">=10/1/2010",
Data!X1:X100000,"=10/1/2010",
Data!X1:X100000,"
View 3 Replies
View Related
