can anybody write a macro code for the following: We want to have five values representing operative time in a row with a mean in the sixth position. The hard part is to get a macro that will allow us to put in a new value in the first column and have it shift the other values to the right and dump the existing fifth value and come up with a new mean.
View 9 RepliesI have set up a forecasting module for my company, which I update on a weekly basis.
Basically, I centered my forecast on an 8 week average. Using all of the various equations in a regression, the 8 week series of data is used close to 500,000 times for each week’s forecast. What I am trying to do is move the 8 week series (A#:G#) and change it to the next set of cells (B#:H#) without having to do it using a filter and change all of the various instances of the occurrence. Because of the nature of the forecast, I will be "rolling" it forward every week, so to be able to do this all at once each week would save me a bunch of time. I tried using the Find/Replace fn by having it use the * symbol in place of the #...and this worked when I had it Find the data, but when I tried to use it to Replace the data, it reported an error?
I have series of companies and output ,some values of output are missed how can be replaced by the average of nearst two years values of output or replaced by the following or previous value of output,sample of my data is attached.
View 4 Replies View Relatedhow i would remove telephone numbers in a particular spreadsheet which are preceded with 44 which need to be removed and then replaced with a zero.
eg. 441234567890
I want to be able to replace the bolded and underlined areas of this javascript i have pasted in a cell with the value located in another cell. This means that those numbers would be replaced by a similar thing located in another cell. how can this be done? The way I would think you would do this by defining that say =b8 (an example of where the data could be coming from is ann excel formula, but not sure how to do this ...
View 6 Replies View RelatedOne of my friend send me a problem. I got frustrated and scold him lot to do work like this but then I tried to work on it. Although my Vb experience is not good enough.
The problem is this that we have different things written in cells in column A like this “SET-EDT SPRAY 3.4 OZ & BODY LOTION 3.4 OZ & TOILETRY BAG “ and in some cells “EDT SPRAY 1 OZ”
Now we want to replace value Oz with value Oz / (Value * 3.75) ml. the below example will clarify the situation: ...
What it does is to activate the desired worksheet, and for 3 different choices replace what's there with what I want to be there. I put this together a while back, and it's working fine, but I'm sure it can be cleaned up a bit. Any help would be appreciated.
View 9 Replies View RelatedI would like to set up a worksheet where once an ID number is scanned, the next cell over is populated with that person's name. (i.e. Johnny scans his ID 234567 and in the next cell, "Johnny Smith" is filled in. I have a worksheet with the ID numbers in one column and names in another, I just don't know how to get a second worksheet with a formula that will allow me to do that.
View 2 Replies View RelatedI need a formula that will replace a dollar amount with an X. In other words...I have 10,000 cels and half of them have dollar amounts in them...I would like to replace them with the letter X without having to manually do it...
View 9 Replies View RelatedI am a not too good programmer, but I construct chemotherapy regimens for my medical department. They are used to minimise the risk of wrong dosing to patients, etc. Every regimen is an .xlt file, and about a third of them (there are about 100) generate, in addition to pharmaceutical prescription, automatic letters to patients (for those regimens where patients administer oral dosing at home).
These patient-letters have the hospital's logo on them (the logo is a "shape").
However, the problem is that another hospital also wants to use my system. So I will have to replace all these logos with the other hospital's. I would like to do this in an automated way. I have received the other hospital's logo also as a shape.
I have already constructed a data-inserting macro in a separate file. This macro systematically opens each xlt file and replaces the text in key locations according to the file the macro is in (geographical names, etc.).
Is it possible to automatically replace the logo-shapes in a similar way, with these additional facts/wishes in mind:
1. There is always only one type of shape (a logo) in the xlt files.
2. Even though the shapes are exactly the same, it is possible the names are different.
3. The exact location for the shape is different in each xlt file, so I'd like the replacement to get the same top left coordinate as the one it replaces.
I have constructed 2 different files with the same data-inserting macro, each containing one of the logos (so I can change back to my own hospital) and geographic data. When the data-inserting macro is used, I'd like it to identify the shape in the data-inserting file (there's only one shape in this file), copy it, then identify the shape(s) in the present xlt file, and then replace these, in the exact same location.
I'm currently building a large spreadsheet which will require numeric codes to be within certain cells. At present these cells are filled with alphabetical codes and the person using them has little knowledge of the numbers, is there a simple way for them to type in the alphabetical code and it to then auto-replace it with the numberical?
View 8 Replies View RelatedHave a column of cells (521 rows), on the column each cell contains a group of number
Example:
27, 539, 484, 485, 506, 594, 523, 502, 505, 525, 541, 526, 527, 529, 542, 533
28, 540, 493, 494, 506, 594, 523, 502, 509, 525, 541, 526, 527, 529, 542, 530
28, 540, 493, 494, 506, 594, 523, 502, 509, 525, 541, 526, 527, 529, 542, 533
Let's say I would like replace 27 to 163 but when I find and replay the "527" also changed to 5163. How can i filtered out 527 and just change the 27. I tried Match Entire Cell Content, it doesn't work.
I have a long list of locations in an excel spreadsheet, stating either the country (eg India) or for US locations the state (in a two letter format, eg NY). I need to change all the state location to say "USA". How can I do this, without doing 50 find and replaces? Can I do something based around the fact all the USA locations are two letters, whereas all the others are longer?
View 4 Replies View RelatedI have a file with some statistics on how agents at work performed. This file gets sent to all of them, but before we send it we change the names for a number, so that they don't know how the other agents are doing (avoiding comparisons). People had been doing this manually, but it's getting really complex as the number of agents is increasing. I know that this can be automatized, but I have no idea on how to do it. A simple formula with an IF statement wouldn't be sufficient. Here's an example of the data. The file that is to be modified to be sent to all the agents looks like this:
View 3 Replies View RelatedI'm working with a lot of documents where I need to replace numberID:s with words.
I have a table of 2 columns, where each number has a corresponding number that it should be translated to.
For instace:
1 - cpu
2 - fan
3 - bus
Is it possible to use this list to automatically Replace all the numbers in a document with their corresponding words?
(Without having to spend time on manually program some kind of macro)
I have 2 colums like this. And I want whenever there is a reference like this âë. "some word" in column 2, to have the macro look up some word entry in column 1, find the text in the same row in column 2 and replace the âë. "some word" reference with the text found in column 2. (See attached, sheet 1 as it is, sheet 2 as I want it to be).
Sheet 1
another wordâë. "some word"
awordìåôÜöñáóç
bwordâë. "aword"
some wordêÜðïéá ëÝîç
Sheet 2
another wordêÜðïéá ëÝîç
awordìåôÜöñáóç
bwordìåôÜöñáóç
some wordêÜðïéá ëÝîç
I need in every column in every rows (that is in whole document ) change symbol, to, (that is before every comma, I need add back slash ).
View 1 Replies View RelatedI am currently trying to get a formula to be added into a range after a piece of code is run.
This is because every time my code has finished, the formula somehow changes and I cannot get it to stop changing values.
I have the formulas further down my sheet, without the = so that it doesn't return a value.
In VBA I have tried something along the lines of Range("A1").Formula = "=" and Range("Z1")
Where A1 is the cell I want the formula in and Z1 contains the formula without an =
It has not updated the cells and they still have the error that I am trying to fix.
Is it possible to use a string to replace code we use repeatdly?
I know that in C it is possible doing this by using what is called a MACRO
For example, replace: ....
Replacing text with formula
I have this so far
Hi i had created a drop downlist (Data Validation list) which consist of the city names and a masterlist of the respective City id to the city names on a different work sheet (same file).
But i would need to configure in such a way that when i select the city from the drop downlist it would appear as number ( City ID) on the excel file.
Hi, i need to change the second and third character from a 3 character word..
I need to change it into 2 characters with double Alphabetical order (TAA, TAB, TAC...TAZ, then TBA, TBB, TBC... TBZ, and so on).. kinda hard to explain.. it's like this:
I am doing a "text to columns" in a VBA script and each time it runs I get a "Do you wnat to replace contents of the destination cells" prompt. I will always say yes to this prompt. Is there something I can put into the code to avoid this prompt all together, again the answer will always be yes to the prompt.
View 3 Replies View RelatedI have been using this code below to replace any blank cells with the number 0 but recently I have encountered an error if the format of the cell is a string.
Code:
Range("A1").Select
Range(Selection, Selection.End(xlDown)).Select
Range(Selection, Selection.End(xlToRight)).Select
Selection.SpecialCells(xlCellTypeBlanks).Value = "0"
Is there a way to change this so it looks at the length of the cell, if the length of the cell is 0 then set the value = 0?
I have a monthly report with over 2,000 entries per column and it is dynamic (number changes monthly). I'm trying to replace individual department names with "department" but keep certain ones the same. For instance- A,B,C,D stay the same but E-Z need to be changed to "department". I first coded an If then macro but was unable to get it to loop and after researching looping realized that it may not be the best option especially with large datasets. Is an advanced filter macro the best option where I filter NOT A,B,C,D and then change the results to department?
View 9 Replies View RelatedI would like to replace an item within a Vlookup in several rows as follows
=VLOOKUP(B18,'C:My Documents[tb1.xls]sheet1!$A$1:$D$65536,4,FALSE) with
i.e. replacing an item after the Lokup value with &""
=VLOOKUP(B18&"",'C:My Documents[tb1.xls]sheet1'!$A$1:$D$65536,4,FALSE)
I created a custom ribbon with tickmark button. The problem is that at sometimes, i will need 2 tickmarks in the same cell.
Actually in using the simple line :
ActiveCell.Value = "a"
And when i click on a second tickmark, it replace my "a" by ei. "b"...how to make it "ab" instead ?
I'm replacing a specific sheet on a workbook with another one, but I want the users to be able to browse to a file, replace the sheet with the new one and re-establish the links on the replaced sheet with the target workbook. This macro is running out of the workbook that supplies the replacement sheet. The idea is that the user opens this workbook, runs the macro, browses to the file they need to fix and hey presto! I'm doing something stupid with my variable name, I'm sure it's syntax but I don't know what I'm doing wrong. The code is posted below.
Sub Macro1()
Dim ToBeFixed
ToBeFixed = Application.GetOpenFilename
Workbooks.Open (ToBeFixed)
Sheets("!").Visible = True
Sheets("!").Select
ActiveWindow.SelectedSheets.Delete.....................
I have WS with over 100 text boxes. Many of them contain text "Current Program".
I would like to replace text "Current Program" in all these Textboxes with text "Testing".
How can I do it without opening each Textbox and replacing text manually?
OS=XP Pro
XL=2003 SP3
I need to move data within a cell. Is there a formula that can accomplish this? Here is an example of what I'm trying to do..
Column A
/ TN14YP244f
/ TN15YP245j
/ TN16YP246h
What it would need to do is take the last character in each cell and move it to replace the P in that cell. It should also capitalize the letter. ie: / TN14YP244f would become / TN14YF244
The letters at the end of the cell are always different, however the letter they replace is always the same (P).