I need to move data within a cell. Is there a formula that can accomplish this? Here is an example of what I'm trying to do..
Column A
/ TN14YP244f
/ TN15YP245j
/ TN16YP246h
What it would need to do is take the last character in each cell and move it to replace the P in that cell. It should also capitalize the letter. ie: / TN14YP244f would become / TN14YF244
The letters at the end of the cell are always different, however the letter they replace is always the same (P).
I want to be able to replace the bolded and underlined areas of this javascript i have pasted in a cell with the value located in another cell. This means that those numbers would be replaced by a similar thing located in another cell. how can this be done? The way I would think you would do this by defining that say =b8 (an example of where the data could be coming from is ann excel formula, but not sure how to do this ...
Let's say I would like replace 27 to 163 but when I find and replay the "527" also changed to 5163. How can i filtered out 527 and just change the 27. I tried Match Entire Cell Content, it doesn't work.
I have a long spreadsheet that is formatted and organized with six digit codes on the left, and then several lines of information on the right, in order to sort and compare to another report, I was trying to replace the blanks in the digits on the left....
I have a spreadsheet with around 1000 rows on data. in each row of data there is a number e.g. 2673 (all in their own cells) so in column A you would have a list of just numbers in another workbook, the number thats in each row corresponds to another value e.g. 2673 = CE103. So this workbook has 2 columns. In column "A" you have the numbers(2673) and in column "B" you have what that number matches with (CE103) i need a way of replacing all the numbers with what they equal Workbook 1 A B C 2673 XXX XXX 513 XXX XXX 5107 XXX XXX 604 XXX XXX
Workbook 2 A B 2673 CE107 513 CDR57 5107 QV906 604 MNT57
There is an example of what i have (hope its understandable) and what i need is, the data from workbook 2 put in to workbook 1. So instead of having 2673 in workbook1, i would have CE107. And the same for the others e.g 513 would be CDR57.
1) What function can I use to replace a specific cell in spreadsheet 2 with what I type in a specific cell in spreadsheet 1 (e.g. type red in spreadsheet 1 in A1 and it will replace a blank cell A1 in spreadsheet 2 with red)? I have around a hundred spreadsheets which I need to name by typing a name in cell A1. Rather than doing this, I already have the names of the spreadsheets in a column.
2) Is there anyway to control the attributes of cells in another spreadsheet? E.g. change to bold, red and specific size font in cell A1 in spreadsheet 2 using cell A1 in spreadsheet 1.
I have a row of different dates in a speadsheet all in the same column e.g A1 to A10 What I am trying to achieve is that when it reaches todays date it will automatically change that cell to read Expired.
I have code that was working with cell references. I replaced one of the cell references with a Defined Name that I applied to the cell that was previously referenced in the code. The code does not work with the Defined Name now. In the code below, the Name "FeeType" was previously where the cell reference was. I have attempted to fix the reference by changing the use of " 's ....
Right click menus are a well known topic but I am struggling to find information on what I want to do with them. I have seen it done so I know its possible. What I want to do is completely replace the right click menu with my own custom one on a worksheet.
I do NOT want to add things to the existing right click menu I want to effectivly disable the existing one and put on my very own one in its place. I have looked at the code for adding a menu to a textbox etc which seems sound but I can't trigger it with an event. I don't have any code to show Im afraid as I am just playing with other people at the moment trying to get it to work.
I have two worksheets, one contains lots of data and the other references this data to form a summary.
The problem is that having set up all this I have found that not all the references on the summary sheet will always reference a cell with data in it and so bring back a value of 0.
Since this summary sheet will be used to enter data into a database I would prefer a blank cell over a 0.
I know I can use an IF ISBLANK to do this, but dont fancy going through each cell and re-writing the formula, so- Does anyone know an easy way of changing all the cell references to include the IFISBLANK statement?
I need some direction on how to proceed with dismantling an address cell. I have a workbook that one field is an address label field. What I mean is the entire address is entered in one field just as it would appear on an envelope. I need some suggestions on how to break this apart and create individual fields for the individual parts.
In a field containing this: Bergamot, Orange*(11,16) I want to put a space before the asterisk. There are hundreds of these in the spreadsheet with other text before and after the text to be replaced. I made sure the field is defined as a text field.
I searched on "*(" and said replaced with " *(" and ended up with " *(11,16)" - the Bergamot, Orange was removed from the field.
My current problem is that I need to search two tabs of data and use the results to modify the contents of one cell in the first tab.
I'll try to be as clear as possible:
tab1 has relevant cells "a" and "b", same row
tab2 has 3 relevant cells "c", "d", and "e", all on the same row
All cells are text values - some digits, but should be treated as a regular String.
The search needs to look at cells "a" and "b", find their match in "c" and "d", then replace the original value of "b" with the value in "e" after a match has been found.
I have an excel work book with 6 tabs. I would like to have Excel move an entire row from one tab to another tab (removing the row and inserting it in the other tab). I.e. Example I have a tab with items that are marked as "Open Actions" so if I were to change the drop down to close. Excel would move that entire row of actions to the tab with the "closed actions" and insert into the next available row. Now if someone were to come back at a later date say no it should be reopened than I would change the drop down to open and excel would move that row back to the open actions tab into next available row. I tried a PIVOT table and no good I played with few macro and not.
I have 3 columns Z, AA, AB. The heading for Z1 is “A”, AA1 is “B” and AB1 is “C” In column Z2:Z2000, there is a mix of A, B’s and C’s. I want A to stay in Z1 column, B’s to goto AA1 and C’s to goto AB1, also I want this added to a macro that I previously created, so everything happens with one push of a button
Now for save, not sure if this is possible or not, if I can have this added to the macro as well that would be great. When I push my macro button, the file saves to “Dec (today’s date) DB (81).xls” The number 81 is the total count of A, B’s C’s, this # will change depending on how may A, B’s and C’s there are. I really hope there is a way of doing all this
Essentially, there are two columns I am dealing with. One is "Sales Rep" and it lists all of the sales reps employed by the company. The other is "Zip Code" and that will list all of the zip codes that sales rep is responsible for.
Now, I have a row of data, all of those zip codes listed out, that each rep is responsible for, but my supervisor wants all of the zip codes listed in one cell, in that second column. Example: (02018, 34098, 16711).
The commas are not necessary, but is there any way to get this done other than manually entering them?
I was able to input barcode reader data into A1, and automatically get the date inserted into B1. I wish the next activecell to be C1, instead of A2 as the above code is doing at the moment - so how do I alter the code above to make this happen?
I have cut and pasted a large amount of data onto a spreadsheet. The problem is that I have two rows of data that is associated with one another, so lets say A1 has a name and A2 contains that person's age. This process repeats in the same way in A3 and A4 and so on.
I need to move the data from A2 to B1 without using a simple function like =A2 in B1. The reason is that I will need to sort just the Names in column A once I get the the data moved. I am not sure how to do this.
My direction keys currently move the screen instead of move from one cell to another. For instance, I will have cell A1 highlighted and then press the down key. Instead of going to A2, it stays at A1 but the screen moves down one cell
I am working in excel and for some reason when I hit the enter key it stays in the same cell. I never had this problem before, what did I do and how do I fix it?
I have a worksheet with running macros which hides & unhide rows based on input of data in yellow highlighted cells (see attached). I'm trying to make all cells mandatory. The below code works but I run into problems when certain cells made mandatory are hidden. For example if I select "Expense" as Type of Expenditure in the attachment cell C10 & C11 are hidden so if its mandatory I won't be able to move forward to next cell.
Private Sub Worksheet_SelectionChange(ByVal Target As Range) Application.EnableEvents = False Me.Unprotect "dawnwh81" Dim myCell As Range Dim myRange As Range
Inputting a value in a cell and need to use vba to transfer it to another sheet in the same workbook. Need it to go to the first empty cell in a column upon clicking a button.....then change the value in the original sheet and repeat (upon clicking button again).
how to filter rows of data, in ascending or descending order, whilst still retaining formatting (in my case cell borders) and conditional formatting?
At present, when I filter rows in ascending / descending order, the cell formatting & conditional formatting stays in it's original position, rather than moving with the cell. I can't find a way to resolve this.
The attachment below is a basic example of what I am trying to accomplish. I am looking for VBA code to take data from E3 in "Historical1" sheets and move it to down into the table in column E that corresponds to the date in D3. The other "Historical" sheets will work the same way. Cells D3 and E3 in each of the "Historical" sheets equal back to cell on the "Entry" sheet. This is a very basic example of the ultimately bigger data base I am building. why I am utilizing a entry sheet to elevate the need to go to each sheet and enter data.
This is the last task in a project I inherited. I have included a sample sheet with 50 rows of data which represents a real sheet with 185,000 rows. This sheet has seven columns, but only two of which apply to this task, columns A and B. Column A is a list of parcel numbers which can, and in many times does, repeat multiple times. Column B is a list of the 'sellers' name for the respective parcel number. This sheet has been sorted by parcel number, then date.
As the current 'seller' was the previous 'buyer', I need to move the 'sellers' name down one row, if the parcel number (Column A) is repeated. If the parcel number is not repeated, the name (Column B) will need to be deleted. This will leave the 'top' line for each unique parcel number blank, which I can work with. As far as the bottom name for each unique parcel number, it will need to also be deleted as there is no where for it to be transferred to. Only the name will be deleted from the 'bottom' row, not the rest of the data. The end result should not change the amount of rows of data.
