I have a column filled with 5 digit numbers and a suffix. (Ex: 12345-001) I need to delete all of the '-001' from all of the numbers in the column. There are over 11,000 numbers. Is there a formula or function that I can apply to the entire column that will delete the suffix?
View 2 RepliesI am accustomed to using filters to find a lot of my information in large datasets.
However, now I am trying to use formulas to return specific values. For simplicity's sake, I have included a sample below with a couple types of scenarios I am looking to solve through the use of formulas. Would this involve sub-arrays perhaps?
sabinfire1.xlsx
Excel questions.docx
How do you delete rows automatically even if there are not an equal amount of rows in between the rows I want to auto delete?
View 3 Replies View RelatedI have a column that has different SIC codes in it (00045, 00046, etc). I would like to set up a macro or filter that would take cells in this column and delete each row that contains a certain code that I don't want.
Example, I want to delete all the rows with SIC codes that have 00345, 00873, 00145, etc in a particular cell. I would like a macro that would look at each cell in the column and delete the rows that I don't want.
I am looking at not allowing users to select the header and footer info. I don't want them to delete it. I have tried to protect the sheet and workbook but not working.
View 1 Replies View RelatedHow can we convert time on a scale of 100 to a scale of 60?
View 3 Replies View RelatedI am trying to find certain words in a column and delete the word and characters following. For example, Say I have a column of info as seen below. This is a test of me. I am just experimenting with this stuff. Deleted (6/15/01) Let me know what you think. I am not sure about it all, but I guess I will figure it out. riviledge1 (01/05/06) Now let's see what happens when I try to test it.
I want to find all the "Priviledge1 (01/05/06)" and replace with nothing. Please note, the date will change with each record, so I need to figure out how to tell Excel to find "Priviledge1", delete it and the date behind it. So I want to delete "Priviledge1" and the next 11 characters including the space.
I want to be able to add a column with mixed numerals. For example: The sum
of A2:A34 with the values in the cells being 1B or 1F or so.
When I set my cell for Numbers it wants a decimal place. If I set it to 2 decimals then 100.1 (One hundred point one) would look like 100.10 (and print 100.10). If I use 100.10 (One hundred point ten) it looks and prints 100.10. If I set the decimal to one then the problem is reveresed.
Setting to General looks like 100.10 (One hundred point ten) but when using VBa to match numbers it is matched to 100.1 not 100.10.
Now I have it set to Text, but I see when I replace (find & replace) values like find 100 replace 99 the 100.10 becomes 99.1.
Incedently I have a macro that compares (and copies cell values) numbers from one sheet to another and occasionally it skips a number, always a decimal value like 100.10 or 100.1. Or any thing x.10, x.1, x.3, x.19 any combination of x.x or x.xx.
Is there a way to format so decimal numbers are decimal numbers and trailing zeros arent omitted? If the value is one decimal I want one decimal, if its two decimals I want two decimals.
I'm creating some workbooks from PDF files. After converting, some of the
values in column A get placed into column B along w/it's values. Column A should have only a 6 digit number. Column B may have a combination of numbers and letters, but more use of letters.
I'm trying to create a formula for that will remove the 6 digit number at the front of my text values if it is present in column b. If it is not, than the column should remain the same. Is there a way to say remove first six values
from left if values are numbers? The results should out put to sheet 2.
I am attempting to enter a code for the current date (m/d/yyyy). For appearance purposes only on the form I am using,
I am trying to enter spaces between the numerals. (" "&m&" "," "&d&" "," "&yyyy&" ".
I can only get the serial numbers to come up, no matter how I try to format the cell.
I want to generate a text column for a mail merge which will add the correct ordinal suffix to dates eg st to 1 as in 1st or 21st or 31st but nd to 2nd 22nd also rd and th where appropriate.
nested IFs?
I have a macro that will add the next letter to a number as a suffix but this will only work for A - Z. But i need variations of upto 150, so i need the macro to add another letter to the variation once Z has been reached. For example at the moment 1000A the next variation would be 1000B up until 1000Z but once this has been reached the macro then starts to use symbols as the code is written using ASCII numbers. So i need the next variation to be 1000AA then 1000AB etc the code i currently have is
Public Function NewVarianceLetter(lngQuoteNum As Long, Optional rngQuote As Range) As String
Dim a As String
Dim i As Long
Dim rngFind As Range
We have two characters : One debit shown as Dr
Another Credit shown as Cr
we have an excel sheet containing a problem as under:
row 1 row2
column 1 Sales 345670 Dr
column 2 Receipt 340000 Cr
column 3 TDS 5670 Cr
We have replaced the Suffix so that it looks as under:
Sales 345670
Receipt 340000 Cr
TDS 5670 Cr
Wewant the last two lines to have figures in the negative ie - 340000
- 5670
i.e. cr suffix change to negative figure -340000
I work with product codes containing suffices and want to copy the product codes to a different column without the suffix.
Example: 960-1043 25KG to be copied to a cell in a different column as 960-1043 only
Each day I recieve a spreadsheet with thousands of row. In col A there is data that has "-NCA1" or "NCA2" as the suffix. I have to "delete" these rows before proceding.
I'd like to know if there is a way to do this with a macro and ideally delete a wildcard suffix with "NCA*" in case any 3...4..5 etc are added.
I would like to fill in a a form on page /sheet one and have the same info on every sheet that follows is it possible?
View 3 Replies View RelatedI have attached a spreadsheet and I am trying to capture the info in lines 2,7,12,17 and return the info into column d,e,f,g
The info in these columns at present has been manually entered but I am sure it could be automated.
OOL Roster Final 18-31Aug14.xlsx
Is there a way to separate the suffix from various addresses i.e
A1= FOSTER AVE
A2=WISE
A3=EL DORADO ST
A4=OLD HIGHWAY 221
Some of the addresses are up to 5 words and numbers, some are missing the suffix all together.
I find, when performing a 'save as', xl puts in a default filename with a suffix (1), or (2), or (3) and so on, to the existing filename, after I have opened a file from MS Outlook. I had assumed it was because there was already an existing file in the default directory, and so it was creating another version, but no other files with the same name exist in the default directory being saved to, or on the remainder of my computer, so I don't understand why this occurs.
View 2 Replies View RelatedI have a piece of code that runs and creates an output Excel sheet that currently has the run date as a suffix for the automatically generated file name. However, I now sometimes have to run this report multiple times in one day, which currently means overwriting the previously run spreadsheet (whereas I would like to keep both versions of the ruin output).
Is there a way that I can create some kind of counter for the number of times the report is run and add that as a suffix for the file name? At the moment the only way I can think to do this is to set up code that looks at the file name containing the date field and adds 1 to every number that is added as a suffix, but this doesn't seem very efficient...
I am using (in Column "B") the formula: =IF(A2=A3."",1), copied down as required, to uniquely identify entries in Column "A". In this instance "10", "10A", "10B" and "10C" located in "A5" through "A11" are viewed as the same. Is it possible to have the formula recognize the enties in "A5:A11" as a unique entry and therfore have "1" entered into cell "B11"? The suffix, if used will always be A thorugh Z.
View 9 Replies View RelatedIs there a formula that will allow you to add an ascending suffix to duplicate data in a column?
For example:
1234
1234
1234
1234
1234[code].....
I've been trying to figure it out on my own for a while now with no luck...
From an Excel 2003 workbook I generate some product labels. Each label has a 5 digit job number and a quantity that are passed to variables. If the quantity is 1, then I have no problems in printing my label. My problem is where the quantity is greater than 1. If a job has more than 1 item (can be up to 40 or 50) I need to add a series of letter (or letters) to the end of the job number.
For example:
Job number 12345
qty 1
number on label 12345
Job number 12346
qty 4
numbers on labels 12346A, 12346B, 12346C, 1234D
so that each printed label has a unique job number
I've got a 80 Mb CSV file and would like to open and work with it. Too many lines (90000 or so).
Is there a way to split ( ) this file so I can open two files instead?
The scale on our chart in the X axis is mandating a numeric number. It is showing "39200" instead of 4/28/07. In any event, we would like to have 4/9/07 -- the last date we have data for and the last date that we have referenced on the X axis.
The chart is in the attached chart.xls and the data is in the attached chart.xls
A set low number of 100 is in cell B4, and a related set high percent of 18% is in cell B6.
A set high number of 1,000 is in cell D4, and a related set low percent of 14% is in cell D6.
In cell B8 a manual number will be typed between 100 and 1,000.
In cell B10 we want a formula that will roundup a percentage number between 14% and 18% depending on the number inserted in B8.
I am trying to create a scale using IF functions in Excel.
I have a row of numbers that I want to convert to my scale. My scale is fairly simple, less than 1 =1 and more than 10 = 1
After that, any number between 1-2 gets a 10, any number between 2-3 gets a 9, any number between 3-4 gets a 8, etc.
So, what I have done is take a logic if-then function and applied it to my row of numbers. It looks something like this:
=IF(2<D2<3,9)
However, this doesn't work. I have a number (2.55), and instead of showing a 9, it says FALSE. I am pretty sure 2.55 falls between 2 and 3 on the scale. Why won't it work?
Also, is there any way to create a function where I could put each of my if/then functions to create my whole scale? Right now I just have 10 separate columns for each number on my scale.
Here's the scenario. A co-worker and I access the same file from the same online database and download it in the same manner. We have the same version of excel. We then open these identical files, we run a formatting macro (identical), but when it comes time to set the page breaks in order to get the items to print on the same page I have to increase a columns width to make it fit on one page and yet it still doesn't match theirs. It appears to have a different scale but I'm not sure of the option difference between our machines. I don't know how it could be the printer since it physically gives her different page break option than what mine does.
View 1 Replies View RelatedI would like to scale an image to 124% how do I do that
View 1 Replies View Related