at present i have the following code that does as intended.
If number < pr1 Then
number = 0
End If
how would i alter this so that it changes the 'number' if number is between pr1 and another number pr2?
I would like to determine the values of cells in column B by the values in column A. I can do that for one cell but not for two or more.
Here is what works:
I have two columns in my spreadsheet:
Test1 Passed
Test1 Passed
Test1 Failed
Test2 Passed
Test2 Passed
Test2 Passed
I need a macro to find all of the same values in column 1 and then look to see if column 2 all of the values are Passed and if they aren't make a new column with the value that isn't passed so after the macro of formula is run you'll have:
Test Status Overall
Test1 Passed Failed
Test1 Passed Failed
Test1 Failed Failed
Test2 Passed Passed
Test2 Passed Passed
Test2 Passed Passed
I am trying to create a macro that determines if a range I am selecting has any non-numeric fields. If it finds say an cell beginning with a letter a message box appears letting the user know and possibly give the cell and value it found.
View 7 Replies View RelatedI have two numbers I need to compare using and IF statement. The two numbers are virtually the same, and I want the IF statement to round the numbers so any difference under 100,000 is not detected. For example:
Cell A1 = $32,194,884.45
Cell B1 = $32,194,884.37
I would like the statement to look at this number as 32.19 (divided by 1M). I am using the below equation currently, but it is not working:
=IF(ROUND(A1/1000000,1)<>ROUND(B1/1000000,1),"CHECK","0")
I've got four tables with negative and positive values and want to determine the largest magnitude of a subset of four values within those four tables. In other words if the largest magnitude is negative I want the negative value of the four subsets or vise-versa.
I've tried the following but got an error stating it was too long:
= IF(ABS(VLOOKUP(table1)) = MAX(ABS(VLOOKUP(table1)), ABS(VLOOKUP(table2)), ABS(VLOOKUP(table3)), ABS(VLOOKUP(table4))), VLOOKUP(table1), IF(ABS(VLOOKUP(table2)) = MAX(ABS(VLOOKUP(table1)), ABS(VLOOKUP(table2)), ABS(VLOOKUP(table3)), ABS(VLOOKUP(table4))), VLOOKUP(table2), IF(ABS(VLOOKUP(table3)) = MAX(ABS(VLOOKUP(table1)), ABS(VLOOKUP(table2)), ABS(VLOOKUP(table3)), ABS(VLOOKUP(table4))), VLOOKUP(table3), VLOOKUP(table4))))
The repeating line needs attention in my mind:
MAX(ABS(VLOOKUP(table1)), ABS(VLOOKUP(table2)), ABS(VLOOKUP(table3)), ABS(VLOOKUP(table4)))
Is there a function, or how would I write a vba to figure out the following.
I have 86 items all with a different price, which come to a total of $348,359.33, is there a way to figure out which combination of the 86 entries will give me a total of $57,673.36
I am looking for a better way to determine if a column of values contains a sequence of consecutive matches. For example, column A contains single words. To determine if three consecutive cells contain the word "neuron", I enter in cell B3 the formula:
=IF(AND(A3="neuron",A3=A2,A3=A1),1,"")
And copy down. I then test column B to see if there are any non-blank cells.
If we want to change the word or the number of consecutive occurrences, I have to re-edit all the formulas in column B. I want to eliminate the helper column. I would like to put the word in B1, the number of consecutive occurrences in B2 and have a formula in B3 that will return either True or False.
I can do this with a UDF, but the user has rejected this option.
Data is;
83300 - hypothetical number of times I have fired my gun at target.
43209 - hypothetical number of times I have scored bullseye.
So, my bullseye percentage = 43209/83300, or ~51.87%.
Need formula to determine how many more consecutive bullseyes I need to shoot, in order to achieve 70% ratio.
Since each shot from now on will be a bullseye, both values (hits & shots) will increment together.
I M trying to get the lower values between to cells and have the lower valued cell highlighted,,,i have over 43 thousand lines of data to go throughand i was wondering if there was a quicker way to do this,,,for example cellA1 is $4.25 and cellA2 is $5.25 i want cell A1 to be highlighted,,is there a way?
View 2 Replies View Related1 workbook, 2 worksheets (or tabs). On tab 1, I want a formula/alert that tells the user if any duplicate values exist in Column A of tab 2
Tab 2, Column A, has Unique ID's (6 digit numeric values)
The user manually inputs the ID's on new rows in Column A
Row 1 is reserved and in use for something else
Row 2 is my header, so cell A2 says "ID"
Row 3-623 currently contain unique ID's
When the user inputs a new ID into cell A624, then they return to Tab 1, I want my formula/alert on Tab 1 to tell the user that they have duplicates in Column A of tab 2. I know the Conditional Formatting, but if the user copies in 100 new values, they won't necessarily see the highlighted cells. My tab 1 is my "checks and balances" and the last place the user is suppposed to look to ensure that they haven't created any duplicate ID's. If the user sees a warning message that says duplicates exist, then I'll tell them that they need to look at column A (for cells that have been conditionally highlighted).
One issue that I'm running into with the conditional highlighting is that I want cells A3:A1048576 to already have the conditional formatting - this way when the user inserts a value into Cell A624, then A625, etc they conditional formatting is already there. Right now with data in cells A3:A623, cells A624:A1048576 are all highlighted with the Red/Bold Red Font (which is okay I guess), but ideally it would be nice to not count 2+ empty cells as duplicates and I'll have to have my formula on Tab 1 not include the blank cells.
I DO NOT want to use the Remove Duplicates feature of Excel 2010. If I remove them I could be removing data in columns B, C, D, etc that belong to the Unique ID. I just need the user to be told in Tab 1 that they DO have duplicates and I'll train the user how to research this and fix it.
The reason I want to look for duplicates in the entire Column A is because the list of Unique ID's will grow over time.
I'm trying to create a formula where: If A1 is between B1 and C1, then it equals D1, but also if A1 is between B2 and C2 then D2 etc.
View 7 Replies View Relatedi need to have this information entered in the row below each time which may or maynot be empty. i need a message box with error handling to ask if the user wants to enter more products or finish and another message box if the entries (which start at cell B4) go past B10 that they have to exit and start a new sheet. I have put the code below and attached the workbook so it may be of use to others
Option Explicit
Sub Locate(Name As String, Data As Range)
Dim rngFind As Range
Dim strFirstFind As String
With Data
Set rngFind = .Find(Name, LookIn:=xlValues, lookat:=xlPart)
If Not rngFind Is Nothing Then
strFirstFind = rngFind.Address
Do
If rngFind.Row > 1 Then
ListBox1.AddItem rngFind.Value
End If....................
Right now in my code I'm using the below section to determine the column in which to search for dupes, and the last column of data for that range. However, I make the user select only part or one column through IF statements above, so there's no need for the user to input this information. I'd like to replace the choice part with and automated routine that determines the DupeCol from the column section selected, and determines the rowend from the last used cell to the right in the rows in that column selection. But I don't know how to do that and keep the values as strings.
VB:
Dim RowEnd As String, DupeCol As String
Dim LastRow As Long
DupeCol = InputBox("Type in the letter of the column you want to look for duplicates in.", "Fill in the Info")
RowEnd = InputBox("Type in the letter of the last column you want colored.", "Fill in the Info")
I have a big serie of charts (parabolas - open down) that i need to find the max value.
View 8 Replies View RelatedI would like to choose an option (C, Q, T) and get a result in 1 column.
In other words, if I type C in H6, I must get a different result in I6 as opposed to if I choose Q or T in the same column. However if I leave it blank I should have nothing or a 0 in I6.
In the attachment above you will see that I gave a sum for C (A3), Q (A4) and T (A5). The sum for each one is broken down into a percentage rate and a flat rate.
These rates are dependent on the initial amount entered into G6. C, Q, T stand for Cash, Cheques, Transfers. The form of transaction determines the % and flate rate to be charged.
I have a spreadsheet with Ethnicity (White, African American, hispanic,
Asian, other) in column A and Time (hh:mm:ss) in column B.
I trying to determine by how many White, for example, have spent less than 5
hours, >5 hrs but less than 10 hr, etc.
My plan is to make a chart of the data.
I've been looking at sumproduct and COUNTIF but I can't quite figure it out.
I'm working with box quantities and would like to get a formula that would take the box quantity and return the largest value based on some parameters. Here are my parameters:
Box Quantity
- 375 pieces
Break down options
2 - 187.5 pieces
3 - 125 pieces
4 - 93.75 pieces
5 - 75 pieces
Obviously options 2 and 4 are no good as I can only work with even break downs. This leaves me with either 3 or 4 and because I want the largest, I would choose number 3. What I need is help on a formula that will take the value of the box quantity and return the largest whole number. I think for the time being I would like to leave the break down between 2 and 5 as well.
What do I do if I want to determine whether an input is within a specified range, and then for there to be an output of a certain value from another cell?
For example, with tax brackets: if income (D) falls within B and C, return value A(from a separate column)?
Here is the data I have:
Column A
"Formula referencing D1"
"Formula referencing D1"
"Formula referencing D1"
"Formula referencing D1"
"Formula referencing D1"
[code]....
Column D, cell D1 is where you would input a number (income) Column E, cell E1 is where I want the output value.
Basically, what I would like is a formula to put into column E that will do two things. First, to determine if the value in D1 is within either (B1-C1, B2-C2, B3-C3, B4-C4, or B5-C5). Second, to then output the value of either A1, A2, A3, A4, or A5, for each respective range.
I want to write a function that goes out and reads a cell, waits a few seconds, then reads the cell again, since it is constantly changing. Then report back the difference between the two readings of the same cell. The following code does not work since t0 and t1 always come back the same value.
Code:
Function ReadTime(t)
t0 = t
DoEvents
Application.wait Now() + TimeValue("00:00:15")
t1 = t
ReadTime = t1 - t0
End Function
formula I can use to determine age between date of birth (in one cell) and an event date (in another cell)., i.e. birthdate 3/15/2000 with an event date of 3/2/2007.
View 9 Replies View RelatedI am having a bit of amnesia right now, but I know there are some smart cookies out there who can do this in a second or two.
I have a certain range in a worksheet (D6:D27). I need to find the first blank row, or the last row with data +1. I would like a worksheet function of some sort that might be used like this
=LastRow(D6:D27)
The result would be row 10 (the first blank row).
I have been searching for the past hour and just can not get anything to work right. I have tried many different suggestions, but I still draw a blank.
i have this code behind a command button in a userform
Private Sub cmdCalculate_Click()
If Me.txtLength.Value > "6.021" Then
lbM2.Caption = Val(txtHeight) * Val(txtLength)
End If
End Sub
the calculations work fine up till i enter anything over 9.999 in the textbox called "txtLength" Can any one see why this will not perform calculations when the entry is more than 9.999 in text box "txtLength"? i tried replacing the label control with a textbox!
Determine If A Number Is Even Or Odd. i would like to Determine If A Number Is Even Or Odd...?
View 3 Replies View RelatedI want to easily determine the max value of the stocks I own by only changing the daily value but i cannot bypass the circular reference problem. Example:
Stock|Today's Value| Max Value
A | 1 | 1
B | 3 | 3
Tomorrow i'm going to change today's value and my goal is that the max value remains unaltered if today's value is smaller. like this:
Stock|Today's Value| Max Value
A | 2 | 2
B | 1 | 3
I am working on a spreadsheet where individuals must enter a value between 1 - 4 or n/a. I would like to include a formula for each question where if they enter a value between 1-4, this scores 1 and if they enter n/a this scores 0. Does anyone know a simple formula I could use, I have tried IF formulas but keep getting muddled.
View 2 Replies View RelatedI have 4 TextBox on a UserForm. First three to enter value and the last one to return the lowest value entered in to the first Three TextBox. How to determine the lowest value and show it on last TextBox.
View 2 Replies View Relatedhow can i get excel to read column c and return the answer into column f i have scores in column c that look like eg. 2-2 what i need excel to do is count the goals
in the example obviously 4 and then in column f if its over 2.5 return the value over but if its under 2.5 it returns under is this possible please given the format of column c?
I'm sure it is possible to solve this with an array, despite all my efforts having produced nothing so far. Attached is an example workbook. On the 'Data' sheet, every month the data will change and I need to fill in column A, with the approriate Name from the 'Map' sheet. Is this possible using an array?
View 3 Replies View RelatedI'm am trying to find some way to determine if a particular tab falls before/after/between other tabs in a workbook. For example, if I have a tab "Top" and a tab "Bottom", I want to be able to determine if tab X is between them.
View 14 Replies View Related
