Determine Value Of TextBox

Nov 8, 2006

i have this code behind a command button in a userform

Private Sub cmdCalculate_Click()
If Me.txtLength.Value > "6.021" Then
lbM2.Caption = Val(txtHeight) * Val(txtLength)
End If
End Sub

the calculations work fine up till i enter anything over 9.999 in the textbox called "txtLength" Can any one see why this will not perform calculations when the entry is more than 9.999 in text box "txtLength"? i tried replacing the label control with a textbox!

View 4 Replies


ADVERTISEMENT

Determine Which Textbox Has Lowest Value?

Jun 23, 2014

I have 4 TextBox on a UserForm. First three to enter value and the last one to return the lowest value entered in to the first Three TextBox. How to determine the lowest value and show it on last TextBox.

View 2 Replies View Related

Formatting TextBox And Check Which TextBox Is The Active TextBox In The Loop

May 18, 2006

I am attempting to format some TextBoxes from within a For/Next loop. I need a way to check which TextBox is the active TextBox in the loop. Using i as the variable, I came up with this code snippet: Me.Controls("TB" & i).Text = Format("TB" & i, "mm/dd/yy")

If i = 3, this gives me in TextBox3 (which is called TB3) the text 'TB3' and not the value of what is in TB3. It has got to bo something simple, I just can't see it!!!

View 2 Replies View Related

Excel 2003 :: Copying Information From Textbox To A Cell (or Another Textbox)

Dec 28, 2013

Is there a way without using code to have the text in a text box (excel 2003), copied to another cell or another text box on a different worksheet?

I have information in a text box on 1 worksheet. I would like this information to automatically be copied to another worksheet. On the master sheet, if any of the information gets changed or updated, the copied information should get updated as well.

View 1 Replies View Related

Conditional Formatting Userform Textbox Based On Textbox Value?

Jul 3, 2014

I've been using the following code to conditionally format userform textboxes based on a specific value (in this case 2490):

[Code] ........

What I'm looking to do now is amend this so rather than use a specific value, to use the value in a specific textbox on the same userform.

View 3 Replies View Related

Userform Textbox Event That Fires After I Exit The Textbox

Feb 2, 2010

I need a userform textbox event that fires after I tab or click out of the textbox. Going by the list of options:Beforedragover, BeforeDroporPaste, Change, DblClick, DropButtonClick, Error, Keydown, Keypress, keyup, mousedown, mousemove, mouseup.

I can't figure out which one will do what I want. The change event happens instantaneously which doesn't work. I need to fire off the event when my focus leaves the textbox.

View 11 Replies View Related

Copy One Value Of Textbox ActiveX On Worksheet To Userform Textbox

Jul 25, 2014

I need the value of active x control textbox on my worksheet 1, to be copied to a textbox in my userform, that pops up from that sheet....

And I want it to display after the textbox on my worksheet has been updated and the comman button for the userform is clicked...

View 1 Replies View Related

Copy Textbox Text When Cursor Moved From Textbox

Feb 7, 2007

In Excel VBA Userform, how to copy the text from textbox automatically when the cursor is being moved from the textbox. And when i put CTRL+V then the copyed text has to be pasted.

View 5 Replies View Related

Adding Text From One Userform Textbox To Another Textbox

Oct 12, 2011

Code:
Private Sub cmdSearchButton_Click()
Dim txtbox As String 'stores lookup value
Dim x As Variant 'value for wwid txt box
Dim ForeName As String
Dim SurName As String
Dim wwid As Variant
Dim iPosition As Integer

[Code] .......

Here is my code, it does a vlookup and if the persons name is not found it will split the text entered into forename and surname but when i try and add

Code:
frmAdd.txtForename.Text = "&ForeName &"
frmAdd.txtSurname.Text = "&SureName &"

It actually displays &ForeName & in the text box of the next from rather than what ForeName is..

eg. John Smith -> search button -> user not found msg -> user wants to add user -> string is split into forename and surname -> forename = John , surname = Smith -> display this in the second form.

What code should i be using to do this, i thought that &ForeName & would work.

View 1 Replies View Related

Insert Textbox With Textbox Containing Formula Rather Than Text

Mar 28, 2013

Looking for a macro to insert a textbox with the textbox containing a formula rather then text.

Sub AddTextBox()
ActiveSheet.Shapes.AddTextBox(msoTextOrientationHorizontal, 2.5, 1.5, _
116, 145).Name = "Textbox1"
ActiveSheet.Shapes(1).Select
Selection.Formula = "=Manpower!R[3]C[1]"
End Sub

I tried this but I cant get the formula portion to work... I just want to insert a macro with that formula....

View 2 Replies View Related

Adding Comments To Textbox And Having Textbox Keep Updating

Apr 3, 2014

I have a form that has three fields (1. Comments (TEXT), 2. Legacy_Comments (TEXT), 3, Comment date (DATE))

Now my users need to keep adding comments to the comment text box, and when they do it automatically adds the date they entered the comment in the Comment date box. Now my problem is that since they keep adding comments to the comment box, I need to keep track of these comments in the Legacy_Comments (Text box).

For example, the First time a user enters a comment into the (1) comment text box it auto populates the date in the comment date box, and then adds the comment and date to the Legacy_Comment box. the end result is (comment,4/3/2014 now lets say a user needs to add a comment to the comments box tomorrow - I want the legacy_Comment box to then read (comment, 4/3/2014; comment2, 4/4/2014, ...., comment(n),date(n)) OR it can be vice-verse, because I just need to keep track of the comments, I am not worried if the new comments are before or after older (yesterdays / the day before yesterdays comments)

How can I write a VBA code that will always add the new comment to the legacy_comment field, without deleting the comments that were entered previously?

Code:
If isnull(me.comment.value) Then
Exit Sub
ElseIf me.comment.value = true Then
me.comment_date.value = date
me.legacy_comment.value = me.comment.value & "," & me.comment_date.value & ";"
me.legacy_comment.value = me.legacy_comment.value & "," & me.comment_date.value & ";"

It adds the comment only the first time, but it does not concatenate the string from yesterday to the string to today. I do not care which order the comments are, meaning if I added a comment today it can be before OR after the comment from yesterday.

View 1 Replies View Related

Copy Value Of Textbox On Worksheet To Textbox On Userform

Jul 27, 2014

I tried looking for everywhere, but i still cant seem to find the solution.. I have an Active X textbox on a worksheet, and I need it's value to show up on a textbox on my userform, that shows up through a command button on that worksheet. I'm fairly new to vba.

View 1 Replies View Related

Transferring Value From Textbox On Multipage 1 To Textbox On Multipage2

Jul 16, 2008

I have a two-page multipage form. I have a textbox on page 1 (txtOccupantLoad), and I want to pass the value from that textbox to another textbox (txtOccLoad_L1) on page 2. The code I've tried so far looks like this:

Private Sub cmbChooseLevel_Change()
If Me.cmbChooseLevel.Value = "Level 1" Then
Me.txtOccLoad_L1.Value = Me.txtOccupantLoad.Value
End If
End Sub

What I'm trying to do is to use the same form for 10 different levels (floors) of a building. Then on page 2, I'll itemize the values for each floor. So the combobox determines which floor the calculations are for; txtOccupantLoad is the total of all incremental occupant loads on that floor; and txtOccLoad_L1 is the first of a series of textboxes on page 2 where the value for Level 1 should go. If the combo box shows "Level 2" then I'll write new code for the txtOccLoad_L2, and so on. I've also tried including "page1." and "page2." after "me."

View 9 Replies View Related

Pass Vlookup Result Of TextBox To Another TextBox

Feb 13, 2008

I am trying to create a user form that has a series of text boxes that will all have a VLOOKUP function in them based off of input from a the first text box. If I can just get the code for the first one, I think I can figure out the rest. We will say that the file that the user form is contained in is 'Agent Administration' and the file that I want the VLOOKUP to pull from is called ' Roster for Auto Population'.

View 7 Replies View Related

Textbox - Using Text Entered Into Textbox As Tab Name

Oct 4, 2012

I have attached my file.

When the Go button in text box in the 'VSVA-1 Data' tab is pressed, a new tab is created. I would like the tab to be renamed after the text that is entered into the text box. Is this possible? Here is what I have so far.

VB:
Sub RenameTab()
'Renames the worksheet tab
ActiveWorkbook.Sheets("VSVA-1 Data").Select
tabName = TextBox1
ActiveWorkbook.Sheets("VSVA Data").Select
Selection.Name = tabName
End Sub

View 1 Replies View Related

Copy From Textbox To TextBox In Another Userform

May 23, 2008

I am trying to copy data from a Textbox in a Userform to a Textbox in another Userform. Is it possible?

In Userform1 I have a button from which I can open Userform2 keeping the Userform1 opened. When closing Userform2 I want to copy the data from TextBox2 in Userform2 to TextBox1 in Userform1.

I was trying to guess the code... but it is not working...:

UserForms("Userform1").TextBox1.Value = UserForms("Userform2").TextBox2.Value

View 3 Replies View Related

Copy Value From Textbox To Textbox

Mar 7, 2007

I'm having trouble referencing a value entered in one textbox to another textbox.

View 2 Replies View Related

UserForm – Data From TextBox To Cell Then Cell To TextBox

Aug 23, 2009

I have a form “RiseSpan” with three TextBoxes, “txtInSpan”, “txtDepth” & txtOutSpan”.
I wish to enter values in “txtInSpan” and “txtDepth”. These values are placed in cells A1 and A2. If both “txtInSpan” and “txtDepth” are greater that zero, I want “txtOutSpan” to show the value of cell C11.

View 9 Replies View Related

Check TextBox Date Higher Than Other TextBox Date

Aug 30, 2006

In a userform I have 2 textboxes date1 and date2 (data from calendar1 userform2). I want date2 always to be higher than date1.

View 7 Replies View Related

Determine Last Used Row

Dec 12, 2007

i need to have this information entered in the row below each time which may or maynot be empty. i need a message box with error handling to ask if the user wants to enter more products or finish and another message box if the entries (which start at cell B4) go past B10 that they have to exit and start a new sheet. I have put the code below and attached the workbook so it may be of use to others

Option Explicit

Sub Locate(Name As String, Data As Range)
Dim rngFind As Range
Dim strFirstFind As String
With Data
Set rngFind = .Find(Name, LookIn:=xlValues, lookat:=xlPart)
If Not rngFind Is Nothing Then
strFirstFind = rngFind.Address
Do
If rngFind.Row > 1 Then
ListBox1.AddItem rngFind.Value
End If....................

View 5 Replies View Related

Determine Used Column And End Of Row

Sep 14, 2012

Right now in my code I'm using the below section to determine the column in which to search for dupes, and the last column of data for that range. However, I make the user select only part or one column through IF statements above, so there's no need for the user to input this information. I'd like to replace the choice part with and automated routine that determines the DupeCol from the column section selected, and determines the rowend from the last used cell to the right in the rows in that column selection. But I don't know how to do that and keep the values as strings.

VB:
Dim RowEnd As String, DupeCol As String
Dim LastRow As Long
DupeCol = InputBox("Type in the letter of the column you want to look for duplicates in.", "Fill in the Info")
RowEnd = InputBox("Type in the letter of the last column you want colored.", "Fill in the Info")

View 4 Replies View Related

Determine Max Value Of Parabolas?

Jan 14, 2014

I have a big serie of charts (parabolas - open down) that i need to find the max value.

View 8 Replies View Related

Using IF Function To Determine Value?

Jan 6, 2014

I would like to choose an option (C, Q, T) and get a result in 1 column.

In other words, if I type C in H6, I must get a different result in I6 as opposed to if I choose Q or T in the same column. However if I leave it blank I should have nothing or a 0 in I6.

In the attachment above you will see that I gave a sum for C (A3), Q (A4) and T (A5). The sum for each one is broken down into a percentage rate and a flat rate.

These rates are dependent on the initial amount entered into G6. C, Q, T stand for Cash, Cheques, Transfers. The form of transaction determines the % and flate rate to be charged.

View 11 Replies View Related

Determine By How Many White

Mar 21, 2006

I have a spreadsheet with Ethnicity (White, African American, hispanic,
Asian, other) in column A and Time (hh:mm:ss) in column B.

I trying to determine by how many White, for example, have spent less than 5
hours, >5 hrs but less than 10 hr, etc.

My plan is to make a chart of the data.
I've been looking at sumproduct and COUNTIF but I can't quite figure it out.

View 10 Replies View Related

Determine Largest Value

Mar 26, 2009

I'm working with box quantities and would like to get a formula that would take the box quantity and return the largest value based on some parameters. Here are my parameters:

Box Quantity

- 375 pieces

Break down options

2 - 187.5 pieces
3 - 125 pieces
4 - 93.75 pieces
5 - 75 pieces


Obviously options 2 and 4 are no good as I can only work with even break downs. This leaves me with either 3 or 4 and because I want the largest, I would choose number 3. What I need is help on a formula that will take the value of the box quantity and return the largest whole number. I think for the time being I would like to leave the break down between 2 and 5 as well.

View 5 Replies View Related

Determine Whether Value Is Within Certain Ranges

Dec 13, 2011

What do I do if I want to determine whether an input is within a specified range, and then for there to be an output of a certain value from another cell?

For example, with tax brackets: if income (D) falls within B and C, return value A(from a separate column)?

Here is the data I have:

Column A

"Formula referencing D1"
"Formula referencing D1"
"Formula referencing D1"
"Formula referencing D1"
"Formula referencing D1"

[code]....

Column D, cell D1 is where you would input a number (income) Column E, cell E1 is where I want the output value.

Basically, what I would like is a formula to put into column E that will do two things. First, to determine if the value in D1 is within either (B1-C1, B2-C2, B3-C3, B4-C4, or B5-C5). Second, to then output the value of either A1, A2, A3, A4, or A5, for each respective range.

View 9 Replies View Related

UDF To Determine Changes In A Cell

Feb 2, 2012

I want to write a function that goes out and reads a cell, waits a few seconds, then reads the cell again, since it is constantly changing. Then report back the difference between the two readings of the same cell. The following code does not work since t0 and t1 always come back the same value.

Code:
Function ReadTime(t)
t0 = t
DoEvents
Application.wait Now() + TimeValue("00:00:15")
t1 = t
ReadTime = t1 - t0
End Function

View 3 Replies View Related

Formula To Determine Age

May 16, 2007

formula I can use to determine age between date of birth (in one cell) and an event date (in another cell)., i.e. birthdate 3/15/2000 with an event date of 3/2/2007.

View 9 Replies View Related

Need To Determine The Last Row In A Range

Apr 5, 2009

I am having a bit of amnesia right now, but I know there are some smart cookies out there who can do this in a second or two.

I have a certain range in a worksheet (D6:D27). I need to find the first blank row, or the last row with data +1. I would like a worksheet function of some sort that might be used like this

=LastRow(D6:D27)

The result would be row 10 (the first blank row).

I have been searching for the past hour and just can not get anything to work right. I have tried many different suggestions, but I still draw a blank.

View 9 Replies View Related

Determine If A Number Is Even Or Odd

Jan 20, 2007

Determine If A Number Is Even Or Odd. i would like to Determine If A Number Is Even Or Odd...?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved