Determine Whether Value Is Within Certain Ranges
Dec 13, 2011
What do I do if I want to determine whether an input is within a specified range, and then for there to be an output of a certain value from another cell?
For example, with tax brackets: if income (D) falls within B and C, return value A(from a separate column)?
Here is the data I have:
Column A
"Formula referencing D1"
"Formula referencing D1"
"Formula referencing D1"
"Formula referencing D1"
"Formula referencing D1"
[code]....
Column D, cell D1 is where you would input a number (income) Column E, cell E1 is where I want the output value.
Basically, what I would like is a formula to put into column E that will do two things. First, to determine if the value in D1 is within either (B1-C1, B2-C2, B3-C3, B4-C4, or B5-C5). Second, to then output the value of either A1, A2, A3, A4, or A5, for each respective range.
View 9 Replies
ADVERTISEMENT
Jun 5, 2007
The compliment of a set is those elements not in the set. Excel doesn't do compliments well.
In Automatic Filter, one can easily see the rows that match criteria, but selecting the compliment of those rows (the ones that don't match the criteria) is difficult.
Similarly, there are the range functions Intersect and Union, but no Symetric Difference.
(Def: the symetric difference of two sets, AB, is the set of those elements in A that are not in B. {1,2,3,4,5}{2,3,4,10,11} = {1,5}.)
Other than by looping through cells:
Given two ranges, aRange and bRange, how would one code for those cells that are in aRange, but not in bRange.
View 9 Replies
View Related
Sep 29, 2007
This code works fine, but it does not look professional. I tried to write like: If Application.Intersect(Target, rng1, rng2, rng4, rng5) Is Nothing Then Exit Sub
it did not work, but as it is down here it worked
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim rng1 As Range, rng2 As Range, rng3 As Range, rng4 As Range, rng5 As Range
On Error Goto NoValidation
Set rng1 = Range("B28:B55")
Set rng2 = Range("D28:D55")
Set rng4 = Range("H28:H55")
Set rng5 = Range("J28:J55")
If Application.Intersect(Target, rng1) Is Nothing Then
If Application.Intersect(Target, rng2) Is Nothing Then
If Application.Intersect(Target, rng4) Is Nothing Then
If Application.Intersect(Target, rng5) Is Nothing Then
Exit Sub
End If
End If
End If
End If
End If
If Target. Validation.InCellDropdown Then Application.SendKeys "%{Up}"
NoValidation:
Err.Clear
End Sub
View 2 Replies
View Related
Oct 25, 2007
I need help creating a macro that will search through my excel spreadsheet and for every instance where column A isn't empty it should cut a range of columns from that row and paste them in a different range of columns in the row before it. It should then delete the row that it cut the columns from and keep searching until it has done this for the whole worksheet. I can modify which range of columns are needed, but it has been so long since I've worked with excel macros that I haven't been able to do it.
View 5 Replies
View Related
Feb 26, 2010
definitions for static ranges and dynamic ranges?
View 9 Replies
View Related
Mar 7, 2013
I have two vertical ranges that I need summarized into 2 adjacent vertical ranges.
"
A B C D
| SUMMARY
model qty| modelqty
1 4.12922.0000| 4.12952.2000
2 2.000012.1250| 2.000025.1250
3 4.12929.0000| 318.0000
4 318.0000|
5 4.1291.2000|
6 213.0000|
"
A1:A6 is my SKU's model number B1:B6 is my inventory C1:C6 should contain formulas that result in a summary of the models D1:D6 should contain formulas that result in a sum of the inventory count for each model
View 1 Replies
View Related
Nov 1, 2006
In the attached file, I have variable range in column A:B, column C:D and in column E:F
I want a macro to do the following:
Start with sheet "A", select the available range in column A
then copy and paste in the sheet "B" but with all the cell values added with the value in H1.
Then in sheet A, simply copy the available range in column B and paste it in sheet B
Do the same until column F in sheet A. Pastespecial if it is odd column. simple past it is even column.
I know the macro code for the simple paste. But I am struggling with the paste special code.
View 9 Replies
View Related
Apr 28, 2014
I have written this macro to convert into a csv file to run for all defined named ranges in the activesheet. It run jst perfect when I hit SAVE button and it creates that many different CSV files for each named range.
However I am trying to use same macro in the another file and the problem I am facing is there a lot more named ranges and I want to run the macro for only selected NAMED RANGE. In this case 2 Named Range / 24 Named range.
What part of code do I need to change and to what to make it work for just 2 named ranges ?
View 6 Replies
View Related
Dec 12, 2007
i need to have this information entered in the row below each time which may or maynot be empty. i need a message box with error handling to ask if the user wants to enter more products or finish and another message box if the entries (which start at cell B4) go past B10 that they have to exit and start a new sheet. I have put the code below and attached the workbook so it may be of use to others
Option Explicit
Sub Locate(Name As String, Data As Range)
Dim rngFind As Range
Dim strFirstFind As String
With Data
Set rngFind = .Find(Name, LookIn:=xlValues, lookat:=xlPart)
If Not rngFind Is Nothing Then
strFirstFind = rngFind.Address
Do
If rngFind.Row > 1 Then
ListBox1.AddItem rngFind.Value
End If....................
View 5 Replies
View Related
Sep 14, 2012
Right now in my code I'm using the below section to determine the column in which to search for dupes, and the last column of data for that range. However, I make the user select only part or one column through IF statements above, so there's no need for the user to input this information. I'd like to replace the choice part with and automated routine that determines the DupeCol from the column section selected, and determines the rowend from the last used cell to the right in the rows in that column selection. But I don't know how to do that and keep the values as strings.
VB:
Dim RowEnd As String, DupeCol As String
Dim LastRow As Long
DupeCol = InputBox("Type in the letter of the column you want to look for duplicates in.", "Fill in the Info")
RowEnd = InputBox("Type in the letter of the last column you want colored.", "Fill in the Info")
View 4 Replies
View Related
Jan 14, 2014
I have a big serie of charts (parabolas - open down) that i need to find the max value.
View 8 Replies
View Related
Jan 6, 2014
I would like to choose an option (C, Q, T) and get a result in 1 column.
In other words, if I type C in H6, I must get a different result in I6 as opposed to if I choose Q or T in the same column. However if I leave it blank I should have nothing or a 0 in I6.
In the attachment above you will see that I gave a sum for C (A3), Q (A4) and T (A5). The sum for each one is broken down into a percentage rate and a flat rate.
These rates are dependent on the initial amount entered into G6. C, Q, T stand for Cash, Cheques, Transfers. The form of transaction determines the % and flate rate to be charged.
View 11 Replies
View Related
Mar 21, 2006
I have a spreadsheet with Ethnicity (White, African American, hispanic,
Asian, other) in column A and Time (hh:mm:ss) in column B.
I trying to determine by how many White, for example, have spent less than 5
hours, >5 hrs but less than 10 hr, etc.
My plan is to make a chart of the data.
I've been looking at sumproduct and COUNTIF but I can't quite figure it out.
View 10 Replies
View Related
Mar 26, 2009
I'm working with box quantities and would like to get a formula that would take the box quantity and return the largest value based on some parameters. Here are my parameters:
Box Quantity
- 375 pieces
Break down options
2 - 187.5 pieces
3 - 125 pieces
4 - 93.75 pieces
5 - 75 pieces
Obviously options 2 and 4 are no good as I can only work with even break downs. This leaves me with either 3 or 4 and because I want the largest, I would choose number 3. What I need is help on a formula that will take the value of the box quantity and return the largest whole number. I think for the time being I would like to leave the break down between 2 and 5 as well.
View 5 Replies
View Related
Feb 2, 2012
I want to write a function that goes out and reads a cell, waits a few seconds, then reads the cell again, since it is constantly changing. Then report back the difference between the two readings of the same cell. The following code does not work since t0 and t1 always come back the same value.
Code:
Function ReadTime(t)
t0 = t
DoEvents
Application.wait Now() + TimeValue("00:00:15")
t1 = t
ReadTime = t1 - t0
End Function
View 3 Replies
View Related
May 16, 2007
formula I can use to determine age between date of birth (in one cell) and an event date (in another cell)., i.e. birthdate 3/15/2000 with an event date of 3/2/2007.
View 9 Replies
View Related
Apr 5, 2009
I am having a bit of amnesia right now, but I know there are some smart cookies out there who can do this in a second or two.
I have a certain range in a worksheet (D6:D27). I need to find the first blank row, or the last row with data +1. I would like a worksheet function of some sort that might be used like this
=LastRow(D6:D27)
The result would be row 10 (the first blank row).
I have been searching for the past hour and just can not get anything to work right. I have tried many different suggestions, but I still draw a blank.
View 9 Replies
View Related
Nov 8, 2006
i have this code behind a command button in a userform
Private Sub cmdCalculate_Click()
If Me.txtLength.Value > "6.021" Then
lbM2.Caption = Val(txtHeight) * Val(txtLength)
End If
End Sub
the calculations work fine up till i enter anything over 9.999 in the textbox called "txtLength" Can any one see why this will not perform calculations when the entry is more than 9.999 in text box "txtLength"? i tried replacing the label control with a textbox!
View 4 Replies
View Related
Jan 20, 2007
Determine If A Number Is Even Or Odd. i would like to Determine If A Number Is Even Or Odd...?
View 3 Replies
View Related
Feb 14, 2007
I want to easily determine the max value of the stocks I own by only changing the daily value but i cannot bypass the circular reference problem. Example:
Stock|Today's Value| Max Value
A | 1 | 1
B | 3 | 3
Tomorrow i'm going to change today's value and my goal is that the max value remains unaltered if today's value is smaller. like this:
Stock|Today's Value| Max Value
A | 2 | 2
B | 1 | 3
View 4 Replies
View Related
Dec 4, 2007
at present i have the following code that does as intended.
If number < pr1 Then
number = 0
End If
how would i alter this so that it changes the 'number' if number is between pr1 and another number pr2?
View 9 Replies
View Related
Dec 20, 2007
I am working on a spreadsheet where individuals must enter a value between 1 - 4 or n/a. I would like to include a formula for each question where if they enter a value between 1-4, this scores 1 and if they enter n/a this scores 0. Does anyone know a simple formula I could use, I have tried IF formulas but keep getting muddled.
View 2 Replies
View Related
Jun 23, 2014
I have 4 TextBox on a UserForm. First three to enter value and the last one to return the lowest value entered in to the first Three TextBox. How to determine the lowest value and show it on last TextBox.
View 2 Replies
View Related
Feb 21, 2009
how can i get excel to read column c and return the answer into column f i have scores in column c that look like eg. 2-2 what i need excel to do is count the goals
in the example obviously 4 and then in column f if its over 2.5 return the value over but if its under 2.5 it returns under is this possible please given the format of column c?
View 14 Replies
View Related
Jun 9, 2009
I'm sure it is possible to solve this with an array, despite all my efforts having produced nothing so far. Attached is an example workbook. On the 'Data' sheet, every month the data will change and I need to fill in column A, with the approriate Name from the 'Map' sheet. Is this possible using an array?
View 3 Replies
View Related
Feb 11, 2010
I'm am trying to find some way to determine if a particular tab falls before/after/between other tabs in a workbook. For example, if I have a tab "Top" and a tab "Bottom", I want to be able to determine if tab X is between them.
View 14 Replies
View Related
Apr 3, 2014
Is there a way to automatically determine the final row number showing after a manual filter operation? Or maybe getting a list of the row numbers showing on the screen.
The project requires a macro that loops through only the rows of a filtered list, not all of the rows in the worksheet.
View 3 Replies
View Related
Apr 29, 2008
Is it possible to programmatically determine the page number on which a specific cell will print?
View 14 Replies
View Related
Oct 19, 2008
If I have a multiple workbooks open and I want to determine if a workbook is open for example "Test 1.xls", how would I do that. I want it to msgbox once to say "open" if open or msgbox "not open" if not open.
View 2 Replies
View Related
Sep 21, 2009
I managed to write my script with pretty much the info I could find on the forums (yes!) but I need to write my data to the last row. Columns A - D of the last row will be populated with the content of my variables. This little snipped gives me the first empty row:
View 5 Replies
View Related
