Running Or Bypassing Code In A Macro Based On A Certain Condition...
Feb 17, 2010
I want to be able to run a certain chunk of code in the macro if a certain condition is true, or if that condition is not true then I want to bypass that chunk of code. It doesn't matter if this is accomplished with an if... then... else statement, or some other way.
View 6 Replies
ADVERTISEMENT
Apr 26, 2008
I have a spreadsheet that calculates percentages and then outputs the results to a pie chart. There are 9 different percentages being graphed in cells A41 to A49. The chart looks weird if any of the percentages end up being 0, so I have the formula set to add 0.00001 to each calculation (so they show up as 0% and display on the chart as 0%, but truly are 0.00001). I would like it so that if any of these 9 percentages ends up being 0 (or really 0.00001) that the row automatically hides and thus won't display on the pie chart. How can I create a macro that automatically runs to accomplish this, and automatically updates as percentages are recalculated.
View 3 Replies
View Related
Mar 26, 2007
I have set up a combolist box, and wish to run different VBA subroutines depending on what the user has selected from the combolist. How do I do this? Apologies in advance if this sounds like a silly question.
View 2 Replies
View Related
Jan 5, 2012
I have a macro, that basically runs a sub routine to count down say for example 1 min, at which time the workbook closes. However if the user opens one of the forms I would like to turn off the background timer macro. How can I do this with code? Is there code that does the opposite of 'application.run'?
View 1 Replies
View Related
May 9, 2008
I am writing a grading program, which during the course of functioning must run other code that has errors. I have used On Error Resume Next code to allow the program to keep functioning when it has run into errors so far. However, when a subroutine is called that calls another subroutine with incorrect parameters, I get a VBA error message pop up. Inserting On Error Resume Next directly into the other code doesn't stop this problem. I either need a way to have it skip over any call to a subroutine with improper parameters, or to check if a project can compile before grading it.
View 3 Replies
View Related
May 22, 2013
I have just written a macro to validate/clean up some data which I get on a monthly basis. Some of the columns come from a pdf file and thus excel recognises these as strings. I have written some code that would convert this string to an integer which runs fine when I step through the code. However when I run the macro from a button the number value goes from e.g. 5000 to 0.
The code is below:
VB:
Sub Condition2()
For k = 8 To LastRow
Worksheets("Bordx Format").Cells(k, i - 1).Value = CDec(Cells(k, i - 1).Value)
Next k
End Sub
View 2 Replies
View Related
Jun 9, 2009
Now..when I run any of my macros, I get the following message.. "Code Execution has been interrupted".
I'm not sure why I'm getting this message but it happens everytime I run ANY macro. Note that if I hit "Continue" every time it gives me the option, I am able to successfully run the macro, but obviously, I shouldn't have to do this.
View 5 Replies
View Related
Nov 13, 2006
I am attempting to run a MS Ecel macro that is stored on a MS Excel shared file in a MS Ecel target file (locally stored on my C drive) from a VBA module in Ms Access. That is, from a code i want to open the .xls file that houses the macro, and then open the .xls file that i want to run the file in, and then run the macro.
Here is my situation: the file that houses the macro has the workbook hidden and causes in error.
if i unhide the workbook i get a Run-Time Error 91...object variable or With block variable not set.
if i hide the workbook the vba coding can't find the macro...run time error 1004
once again, i currently have an excel file that houses macro whose workbook is hidden.
does anyone know how this can be accomplished?
here is the ....
View 9 Replies
View Related
Apr 24, 2009
I have an Excel spreadsheet that is given to me weekly, but I'd like to remove repetitive and empty rows before presenting it to someone. It is set up like this:
Row 1, A1, contains the word Project.
Row 2 is blank
Row 3 is blank
Row 4 is blank
Row 5, A5, contains the word Organization.
Row 6 is blank
Row 7, A7, contains a 6-digit number starting with 3.
Row 8 is blank
(all of the above starts over again (loops) approximately 30 times)
The final row contains the phrase "Grand Total"
*Row 5 is repetitive and is not required. I'd like to delete it.
I have too many empty columns. Getting rid of them (and Row 5) would greatly shorten my spreadsheet.
I am aiming for:
Project
301111
Project
301112
Project
301110
(Repeat until finished)
Grand Total:
View 4 Replies
View Related
Jan 25, 2010
I would like a code which looks on the worksheet “Racks” and if Column A is "Y" then copy the entire row and paste it on the to sheet “Summary Racks”. I would need it to then find the next instance and then continue to copy and paste. I have attached the file I am currently working on.
View 4 Replies
View Related
Aug 17, 2009
I've got a worksheet_selectionchange macro on a sheet, and another macro that you can run after it. The issue is that when the second macro runs, it also runs the selectionchange macro, and wipes some of the info that the second macro should be copying.
Is there a piece of code that I can use in the second macro to block the selectionchance code from running until it's compelte?
View 6 Replies
View Related
Sep 19, 2007
Is it possible to display both the current code line number and the total line count of a macro while it's running?
I was thinking it would be handy for a progress indicator if the ProgressBar max value could be set to the LineCount total of the procedure and each line of code would increment the progressbar as the macro ran.
View 9 Replies
View Related
Dec 20, 2012
I have multiple sheets in one file. I need a code (that will be ran at random) to look at all the sheet names and the ones that end in the word "Archive" to move to another file.
View 5 Replies
View Related
Aug 22, 2013
The issue is the I want to put the condition here in my the code that only copies the desired cells if the sheet is named specifically such as "Jan", if not named as this the worksheet should not be used. The current code I am using was posted on this site in 2009: VBA to copy specified cells from all the files in a folder
My modified code is:
Option Explicit
Public strSourceFldr As String
Public EachFile As Object
Public objFSO As Object
Public objFolder As Object
Public objFile As Object
Public strSheetName As String
[Code] .........
View 1 Replies
View Related
Jul 7, 2008
I am setting up a "save as" macro that saves a file by replacing another file in a folder. Even though the macro has been recorded by approving the replacement (the prompt appears "the file --- already exists. Do you want to replace the existing file?"), when I run the macro, I am again prompted about replacing the file. Is it possible to avoid the prompt so the file is automatically saved by replacing the named file?
View 9 Replies
View Related
Feb 18, 2009
I have a spreadsheet that I need to cut and paste data from one tab to another but only from columns B:K (as the spreadsheet has formulas that can not be alterred after column K. It must also paste that data for the hidden columns.
The condition on the data to be pasted in based on the tabs along the bottom.
So for example, anything that says Corn Products needs to be cut from the "standard customers" tab and moved to the Corn Products tab, and so on for the additional tabs.
I then need to un-check (hide) Blanks from the filter on the Standard Customers tab.
If possible, I would like run the Subtotals function in this same macro; the conditions for that are as follows
For each change in Shipper, Subtotal Billing for <<month>> (Column S)
Page break inbetween each Change in Shipper, then I would also like each subtotal figure bolded.
Also, this is something I must do every month, and each customer may have more or less lines or no lines at all in any particular month.
View 14 Replies
View Related
Mar 4, 2009
Currenty i am designing accounting related excel design. In that i need one macro for entering the value in a table based on some condition. I explaine the concept behind this, could some one able to help mean please share the information
I have a xls worbook with two sheets.
in the first sheet contain the column for entering the values.
in the second sheet having one small table withdate and Numbers.
i need to enter the values in the first sheet S.NO, Date and Value. when i enter the value in the first sheet, the date and S.No is compared to the second sheet table Date and the S.No and the value should be placed in the appropriate cell.
View 9 Replies
View Related
Jun 21, 2014
I need the VBA code to automate my repeated task. I have the range of 100 rows and has the date field in a column and i need a macro to extract the rows for three previous days starting from today.
View 2 Replies
View Related
Feb 16, 2014
I created a Vlookup but first want a condition to be met to determine what Vlookup to use.
Such as
If cell = 1 then
run Vlookup #1
If cell = 2 then
run Vlookup #2
There are only 4 possible variables that the cell could equal. This would have to be on a loop, because the entries in the worksheet are multiple. It would first see what the specific cell equaled, then determine what Vlookup to use.
View 1 Replies
View Related
Oct 16, 2006
Attach is a sample of my project. I have to loop through B9:B80 in sheet("Raw Data") and capture the value of each cell. EG:
* if Value captured is 120A --> check with sheet("SP14F") from the row which contains the same value.
* i have to check that the aperture, outer and inner values of Layer 120A and so on..of the Raw Data sheet is the same as that of in the SP14F sheet.
* if the values are not the same, change the font to red
i understand that this task requires looping and arrays.
View 4 Replies
View Related
Nov 21, 2012
Lets say we have data in Column A, B, C and D and no row left blank. In the column A no cell left blank however in B, C, D any one cell only contain a value in that row. If B10 has any value in it then C10 and D10 are left blank (not empty). I want to segregate the data in Column A based on the value in B, C or D. So this one column data ( that is Column A) will split into three column. this segregated data to be put in E, F and G.
Wherever Column B has any value that's greater than zero content from the column A from the same row should copy to the E, Wherever Column C has any value that's greater than zero content from the column A from the same row should copy to the F, Wherever Column C has any value that's greater than zero content from the column A from the same row should copy to the G.
View 4 Replies
View Related
May 12, 2009
I am dealing with several very large spreadsheets using VBA to do various things. I found that my code worked well, but was taking a long time to run. The biggest time consumer was my use of the AutoFilter features. I have since turned calculations to manual before my code runs and set it back to auto when my code is done running. What are the potential consequences of my turning calculations to manual and then back to auto?
View 2 Replies
View Related
Jan 20, 2010
I'm attempting to SUM a column of data (5 cells). It's possible that I will have #N/A in any number of them, as they call their data from another cell. Specifically, if C16 is:
=INDEX(plan_minutes,MATCH(B16,plan_name,0))
Then it checks for the text in B16 (which is populated via a dropdown list), matching the index to minutes billable (plan_minutes) and returns the value that corresponds. For example, B16 is "Monthly 50" and includes 50 billable minutes, C16 returns "50" as its result.
This becomes an issue when a billing plan isn't selected in B16, and returns #N/A for C16. For formatting and cleanliness, I have conditional formatting on C16 that states =ISNA(C16) and changes the font color to white.
WE'RE STILL NOT TO MY PROBLEM!
I can deal with the #N/A in C16-C20 with conditional formatting. What I can't deal with is my billable minutes total cell (E50).
The cell should add the billable minutes in C16-C20, but doesn't. I believe it's because the information in C16-C20 is actually text, returned by the index, and not a true number. Is there a way around this or should I change my method in some way?
View 9 Replies
View Related
Jun 2, 2014
I am creating a worksheet that needs to input information from other worksheets that have not been created yet. I will be using this to input information as time goes on (monthly); however when trying to create the cell, I get a message that says "a formula in this worksheet involves one or more invalid references. Verify that your formula contains a valid path, workbook, range name, and cell reference." The worksheets I am trying to reference will be created eventually, but I want a formula that will not have to be updated monthly and I can just use it to roll over month to month.
My current formula looks as such:
=IF((IF($A$2=1, '[2014 Corp Engineering Project Codes.xls]Period 1'!$A13, 0))
(IF($A$2=2, '[2014 Corp Engineering Project Codes.xls]Period 2'!$A13, 0))
(IF($A$2=3, '[2014 Corp Engineering Project Codes.xls]Period 3'!$A13, 0))
[Code] ........
I have up to 'Period 6' created so far, the error highlights 'Period 7'.
View 3 Replies
View Related
Jan 27, 2007
The spreadsheet basically copies data by looking in all workbooks in different folders (27 in total) and copies the data across. The only problem is that it keeps asking for the password on all of the spreadsheets when it is opening up the files (all have the same password) - how do I get the code to "know" the code and bypass asking for it?
Function LastRow(sh As Worksheet)
On Error Resume Next
LastRow = sh. Cells. Find(What:="*", _
After:=sh.Range("A1"), _
Lookat:=xlPart, _
LookIn:=xlFormulas, _
SearchOrder:=xlByRows, _
SearchDirection:=xlPrevious, _
MatchCase:=False).Row
On Error Goto 0
End Function
View 7 Replies
View Related
Feb 4, 2010
I have modified the export a range to HTML code from Mr Walkenbachs excellent book and it all works well (still learning my trade with vba!!). The only issue I have is when the code a save as dialogue box appears. As I am looking to automate this process I was hoping to get this code to automatically save preferably to a path ("c:dailyrange.htm" for eg). I have tried various permutations but am really struggling with the concept.
I am using excel 2003.
The code
Sub ExportToHTML()
' Dim ws As Worksheet
Dim Filename As Variant
Dim TDOpenTag As String, TDCloseTag As String
Dim CellContents As String
Dim Rng As Range
Dim r As Long, c As Integer
'Create 7 htmls one for each column of the specified range
For Column = 1 To 7
Range(Cells(14, Column), Cells(40, Column)).Select
' Use the selected range of cells
Set Rng = Application.Intersect(ActiveSheet.UsedRange, Selection)
View 9 Replies
View Related
Apr 12, 2014
So I have one sheet that needs to pull data through to another sheet (which is a stats summary)
I have a drop down list containing 4 options all of which have to be counted separately on the stats summary sheet. However I only need them counted when a value is input in another cell in that row.
For example: I select option 1 from down down menu, but I only want this to be counted on the stats page when I enter a date in the "date" cell.
View 9 Replies
View Related
Jan 5, 2012
I am in the process of transferring data from one workbook to another.
I am doing this simply by clicking on the cell where I want the data to be, typing "=", then clicking on the cell in the other workbook I want it to match. While there might be easier ways to do this, it isn't too terrible and my columns are not in the same order in the two workbooks.
The problem I'm running into, is when I click on the cell I want to copy over, the formula defaults to the fixed formula (puts $ around the cell name) and I want to be able to copy down the formula over multiple cells.
I can click on the cells and press F2 once then F4 three times to get the formula over to the desired non-fixed format, however, I have to do this for 12 different workbooks and on roughly 40 columns for each.
Is there a way to expedite the process or turn off this fixed-formula default?
View 2 Replies
View Related
Nov 30, 2006
This is bizarre - over the last year or so, on two machines (one Win98SE/Off2K, the other Win2KSP4/Off2K3), very occasionally a change I've made to Excel/VBA code has been ignored (eg to add a MSGBOX call) - even after I've restarted Excel. The workaround is to add a blank line and remove it again in the actual code module, but its both annoying and intriguing,
View 4 Replies
View Related
Nov 6, 2008
My code runs so slow! The sheet only has 233 rows and 6 of them are not in the loop.
View 6 Replies
View Related