Display Formula & Cell Value In Another Cell

Jan 14, 2008

I'd like to dislpay the workings of a formula (that refences other cells) in a seperate cell. e.g. Formula =A1-1000/B1. would show as =2000-1000/20 (If Cell A1 = 2000 & B1 =20)

View 2 Replies


ADVERTISEMENT

Using IF AND Formula To Display A Cell With (0) As Yes But It Also Returns Empty Cell

Apr 14, 2014

I wrote an IF AND formular to display "Yes" for a cell with zero. but when the cell is also empty, it still returns a "Yes" instead of empty.

this is the formular:

=IF(J2=3,"Yes",IF(AND(E2="",I2=0),"Yes","No"))

when I2 = 0 it returns Yes

Also with I2 = "", it still returns "Yes" instead of "No"

View 6 Replies View Related

Display In The Cell And In The Formula Bar

Mar 23, 2007

When I type a formula into a cell, it disapates into the answer. Eg: I type =100/2 into the cell. When I press enter and go back to the cell, the answer is displayed in the cell and in the formula bar. That is, it looks as if I typed in (hard coded) the cell as 50.

View 9 Replies View Related

Display Cell Values In Formula Bar?

Apr 8, 2013

I have a problem where I am linking data from two worksheets say: worksheet 1: A1 = 10, A2 = 20 worksheet 2: A1 = =Sheet1!A1, A2 = =Sheet1!A2

I have filled this formula through a certain number of cells on sheet 2 so that if i add more data to sheet1 it will appear in the appropriate place on sheet2. Is it possible to show the formula results in the formula bar, i.e. sheet2: A1=10, A2=20, such that i can used 'Find' or 'Autofilter' on the cell values rather than the formula?

View 7 Replies View Related

Display Formula In Adjacent Cell

Mar 19, 2009

I want to display the formula in the adjacent box to where it is actually used. Would anyone happen to know how to get that done? Example:

If cell A1 contains the following formula: A1+ A2
I want cell A2 to show : '= A1+A2'

View 4 Replies View Related

Formula To Display Cell Reference

May 6, 2006

I built a formula but I need it to display the cell reference (column letter
& row number), not TRUE or FALSE, of the cell(s) that matches the criterias.

I have provided the formula to demonstrate what I'm trying to do.

=IF(--($F17="B")--($F17="D")--($F17="RS")*AND($M17="no",$O17="no"),"cell
reference")

The cell reference should indicate the cell in column "$F" along with the
row number.

View 10 Replies View Related

Cell With Formula Does Not Display Results?

Aug 17, 2012

Just yesterday when I opened my excel file, all the cells that contains formulas does not display the results (leaving the cell blank).

For example the formula for cell A1 is =B5. But after putting a value in cell B5, cell A1 is still blank.

View 4 Replies View Related

Formula To Display Its Own Cell Reference As Its Value?

Feb 14, 2014

Say, the cell's reference is A1, I want the value of the cell to be A1. If I'm in BB12, I want the value of the cell to be BB12

View 3 Replies View Related

Display Result Of Formula In Cell

Nov 15, 2006

Sub startup

Dim numwords As Integer

numwords = WorksheetFunction. CountA("H5:H64")
Range("H1").Select
Selection.FormulaR1C1 = numwords

I have a quick question regarding this simple code thats been drviing me nuts. There x distinct pieces of Data in the range speciifed, but when i run this code, the reply posted in cell H1 is 1, instead of x.

Eventually the code will be built to check if the result is odd or even and then add an entry into the first blank cell if the result is odd.

View 4 Replies View Related

Capture/Display Cell Formula

Apr 4, 2008

How do I capture a formula from a cell? I want to create a macro that takes each reference (let's say 'B4') and changes it to if(B4=0,0,B4).

View 8 Replies View Related

Formula That Will Look For Keywords And Display Cell Content?

Sep 23, 2011

is it possible to have a formula that will look for keywords and display the cell content?

View 2 Replies View Related

Display Formula Contained In Cell Within Worksheet?

Mar 11, 2012

I'd like to display a formula contained in a cell within the worksheet. How can I do that?

View 4 Replies View Related

Define Cell To Display Formula Result In?

Jun 5, 2014

I am trying to find a way to display text that is the product of a concatenate function in a defined cell, but not to have the function itself in that cell. Basically, I want to have the below function in cell A1. I want to add a command to it to take the result and display it in cell A2.

=CONCATENATE(C5,"_",'Attachment 3-A'!C9:E9,"_",IF(C5="","",IF(C6="MPL",IF(VLOOKUP(C5,MPL!B:F,5,FALSE)="Lease","Lease_Contributable",
IF(VLOOKUP(C5,MPL!B:F,5,FALSE)="Pre-Lease","Managed_Pre-Lease",
IF(VLOOKUP(C5,MPL!B:F,5,FALSE)="Non-Contributable","Managed_Non-Contributable","Error"))),
IF(VLOOKUP(C5,Sale!B:F,5,FALSE)="Assignable","Lease_Assignable","Managed_Non-Assignable"))))

The reason for this is that I need the cell to be selectable (it is generating a file name that needs to be selected and copied), but I don't want the code behind it to be seen. I can't find a way to make the cell selectable AND hide the formula from being seen when the cell is selected. This is because our people keep copying the formula rather than the resulting text.

I was hoping for something like a DISPLAYIN(target) function, but it doesn't seem to exist.

View 2 Replies View Related

Row Indexing Formula To Only Display Non Blank Cell Values

May 30, 2014

In range B4:M4 some cells contain values and some are blank. I am trying to write a formula that will omit the blank values and just give me the nonblank values. The code below returns the FIRST nonblank value, but I can't seem to figure out how to drag it across a row to get the others. I want to ensure that the numbers stay in the same order (so no largest/smallest formulas), but the blank cell values need to be removed.

This would then need to be repeated for (B5:M5, B6:M6, ETC).

[Code] .....

View 2 Replies View Related

IF Formula Syntax (cell To Display The Word FAIL)

Jun 23, 2009

If the addition of two cells (a1 and b1) do not add up to more than 10 then I would like cell c1 to display the word FAIL

I've tried the following

If (a1 + b1 ) < 11 then c1 = "FAIL"

But it doesn't like it

View 4 Replies View Related

Formula To Have One Cell Display Multiple Options Depending On Value In Another Box

Oct 1, 2013

I need to build a formula to have one cell display multiple options depending on a value in another box.

If Value is >x and <x display Y

Details:

Cell D5 Holds a dollar amount. E5 is where the calculation will happen. Logically i need it to do the following exactly:

If D5 is between 5000 and 9999, display 75. If D5 is between 10000 and 14999 display 150. If D5 is between 15000 and 19999 display 200. If D5 is >20000 display 250.

View 2 Replies View Related

Display/Show Blank Cell Via IF Formula/Function

Sep 27, 2006

The following are on a sheet:

A1 = 5700
B1 = 235
C1 = 17:14
D1 = 5922
$E$1 = 09:01
$F$1= 3

$E$1 and $F$1 are (the only) absolutes/constants.

A2 contains the following:

=IF(A1>D1,B1,IF(A1+B1<D1,"d",IF(AND(C1<$E$1,B1<$F$1),"",B1))))

This translates as:

=IF(5700>5922,235,IF(5700+235<5922,"d",IF(AND(7:14<09:01,235<3),"",235))))

The result is a variable/number (235), "d" or a blank cell ("").

This formula is in a column and works fine where there are numbers in corresponding cells. The problem arises with corresponding cells which appear blank (show no values) but contain references to other cells: they result in a "d" when nothing should be displayed.

So while a corresponding blank cell is correct if it shows no values, it gives me this problem - I don't want "d" or anything.

View 3 Replies View Related

Formula In Cell To Display No Of Cells In Selection (in A Range) Anywhere In Sheet

Feb 10, 2012

Can I have a formula in A1 cell to display the No. of cells in selection (in a range) any where in the sheet. Just the No. in A1 cell is sufficient

View 4 Replies View Related

Look At Data From One Cell Reference Another Cell Then Display The Results From The Cell Next To It

Jun 19, 2008

I have 2 problems relating to LOOKUP.
Not sure if Excel can perform these calculations as they could get to complex.

Problem 1
Can it be possible to have excel look at data from one cell reference another cell then display the results from the cell next to it in another cell, sort of example:

Tab 1 (Never changes)
AB
Bob1
Jon2
Fred3

Tab 2 (Dynamic, changes each week)
AB
Jon
Fred
Bob

So it would work as follows.
Tab2 column B will take Tab2 column A’s data check Tab1 column A and display Tab1 column B’s result.

Problem 2

Weekly league rank table that shows position movements week by week
Example.

Week1
1Jon
2Bob
3Fred

Week2
1FredUp 2
2BobNot Moved
3JonDown 2

Can Excel calculate/show the actual movements of league positions?

View 9 Replies View Related

Cell B1 To Display True If Any Of The Values In Column C Match Otherwise I Want To Display FalseOR Function Confusion

Dec 16, 2008

Example:....

i m wanting Cell B1 to display true if any of the values in column C match otherwise I want to display false.

A 1
B 0
C 0
D 0

But I can't determine how to get this done.

View 5 Replies View Related

Cell Referenceing (display The Value In The Cell Offset By X So I Can Bring The Numbers From Sheet1 Over)

Jul 17, 2009

Sheet1 is a list of names, then a few columns of numbers.
Sheet2 contains calculations based of the numbers in sheet1.

Each sheet from 2 on is names after the names in sheet1 column A...
A large cell at the top of each sheet contains the formula to display the sheet name:
=MID(CELL("filename",A1),FIND("]",CELL("filename",A1))+1,255)

So what I want to do now is...
in cell, look for the cell in sheet1, and display the value in the cell offset by X so i can bring the numbers from sheet1 over.

In plain english the cell would say like...
"look in sheet1 for "Name" then display the cell next to it"

I know to look in the next sheet its "=Base!B2" if i wanted b2 on sheet base.
I know to use "=OFFSET(Base!B2, , 1, , )" too look at B2 and go right 1 column.
But the issue is i dont want Base!B2.. i want whatever cell in Base column A that has the text that A1 has.

View 2 Replies View Related

Increase That Amount By A Percentage Identified In Another Cell And Display The Value Only Without Any Formalas In A New Cell

Jan 19, 2009

If a cell is not blank, then increase that amount by a percentage identified in another cell and display the value only without any formalas in a new cell. To this end I wrote this IF statement:

=IF(I2>0,CP9=(CA9*I2/100)+CA9,CP9="")

Observation: I see a FALSE in CS9 where this IF statement exists, however, CP9 does not display the required value.

View 8 Replies View Related

Excel 2010 :: Display Cell Ranges From Multiple Locations Based On 2 Cell Values?

Jun 4, 2013

I need to display a set of cells based on the value of two drop down cells i have. As I am not very good at english and worse at explinations, I'll try via screen shots...

I have two dropdowns (C4 and C6) that will indicate what table to use (Second sheet / screenshot). I want that "table" to display in the yellow box on the first page. To complicate matters, some options do not have a CLA option - those starting with X. As there are 24 different outcomes and each is 3x9 if/then statements just dont seem to cut it.

P.S. I have excel 2010 and windows 7

View 1 Replies View Related

Cell Date Formatting: Cell To Display Mm/dd/yyyy And Enter Mm/dd/yy

Aug 13, 2008

I have Excel 2000, recently when I format a cell to display mm/dd/yyyy and enter mm/dd/yy, it is displaying dd/mm/yyyy. Or it starts out correctly and during a future opening of file it displays incorrectly.

View 2 Replies View Related

Listing Number In A Cell To Display List Of Items In Another Cell

Apr 24, 2014

When inserting "1" in the cell under soup, i was thinking it will bring up a list of its ingredients and how much of that ingredient. The values are listed in the same spread sheet below.

The amount of the ingredient is in D50 (80grams) and the item type next to it in E50(onion)

Is it possible to put in "1" soup then it displays all the items in both those cells range example(D50-E50 to D60-E60)?
Is it possible to put the value "2" in soup and it shows double the measurements? example (160grams) (onion)

View 4 Replies View Related

Macro To Find Match Delete It From The Cell Display It In Different Cell

Apr 23, 2008

I have a huge database. I am looking for a macro that can search for a particular word. If a match is found, the macro should do two things simultaneously... (i) delete the contents of the cell in which the match is found........(ii) display the same contents 1 row below and 1 coloumn to the left of this cell where the match is found. For e.g....

View 9 Replies View Related

Find Row Max And Display Cell Contents Of Cell To Left?

Aug 12, 2014

I have data arranged in cells A1 to Z1 as Name1, Amount1, Name2, Amount2, Name3, Amount3, etc. Is there a formula that can determine the name that corresponds to the maximum amount in the row?

View 7 Replies View Related

Display Contents(text) Of A Cell Referenced By A Given Cell

Feb 9, 2009

I want to display the contents of cell B5 in A7 by using cell C7 to show the location of the cell to be displayed. Cell C7 has a formula that shows the cell location of information (text) that needs to be displayed. How can I show in A7 the contents of cell reference shown in C7? In figure attached I show an example to better understand. Want in A7 to show the contents of B5 by reading what is in C7. So A7 cell should show word Road.

View 3 Replies View Related

Display Cell X Of Range Based On Another Cell Number

Feb 18, 2008

I am trying to create a table, based on what people predict in sports games. I have most of it in place, but I have hit a brick wall where one part of it is concerned. For example, cells M43:M56 have the scores for each week of what one person predicted., so it could be 2,5,7,2 and so on. What I then need the table to do is determine which round or week it is and display the relevant score. So based on the above let's say it's round 3, and his score would be 7 for the week, and the cell to the right of this shows the week's score plus his total score so far.

View 2 Replies View Related

Make Cell Formula Display A "+"

Mar 10, 2008

i have a formula that will return both negative and positive numbers. If it's negative it obviously shows a "-" sign. How do I force it to display a "+" if the result is positive?

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved