i have a routine which loops through a range looking for past dates and when it finds one display the result in a message box in my testbook i only use 25 rows but it gets annoying having to click ok for every find....is it possible to collect all results and display them in the message box at one time?
Private Sub Workbook_Open()
Dim Mycell
Dim Rng
Set Rng = Sheets("Sheet1").Range("B1:B25")
For Each Mycell In Rng
If Mycell.Value < Date Then
MsgBox Mycell.Offset(0, -1).Value & " Is Overdue By " & Date - Mycell.Value & " Days, Take Action Now!", vbOKOnly, "Tasks Overdue"
End If
Next Mycell
End Sub
I am using an input box to enter the value of column D. After the value of column D is entered, I want a message box that displays the corresponding data in column A and B. with the vba coding?
creating a .Find code to search a range on a sheet and then display each result seperately in a msgbox. An inputbox will be the value .find searches the range for.
the msgbox needs to be a vbyesno
VB: 'SEARCH CODE Dim myItem As String, myRNG As Range, NewLoc As String Dim Found As Range [code].....
I have a workbook that can open a URL into IE when a project number is entered in an input box.
What I would like to happen is that if the project number entered does not have a URL against it and the value is #N/A, then the message box will display "Project does not exist". However if the number does exist, I want a different message box to be displayed which is a yes/no box.
The code below is what I have tried which works fine if the cell value is #N/A but when it is not it throws an Run-Time error 13: Type mismatch
Code: Sub SearchPidsMessageBox() Dim Answer As String Dim MyNote As String
I want to display a comment/note that is always visible however:
*The text in the comment should change "only when" the user of my worksheet "clicks" on a specific cell in the worksheet; *I do not want that a comment appears/disappears/ changes when the mouse moves over any of the cells *I do want that the same comment/note is used to display different text when the user clicks on another cell in the worksheet *I do want that the user can position this comment on his screen where he wants it to be.
I have a quick question regarding this simple code thats been drviing me nuts. There x distinct pieces of Data in the range speciifed, but when i run this code, the reply posted in cell H1 is 1, instead of x.
Eventually the code will be built to check if the result is odd or even and then add an entry into the first blank cell if the result is odd.
I am using this code to display a message when a range is empty on workbook save. Case "A" gives an error when referring to a range, the second case works fine. How can I change it?
Code:
Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, Cancel As Boolean)Select Case Worksheets("Sheet1").Range("B6").ValueCase "A" If Worksheets("Sheet2").Range("D104:D109").Value = "" Then MsgBox "Cells cannot be empty!" Exit SubCase "B", "D", "F" If Worksheets("Sheet2").Range("D112").Value = "" Then MsgBox "Cells cannot be empty!"Case ""End SelectEnd Sub
I am trying to find a way to display text that is the product of a concatenate function in a defined cell, but not to have the function itself in that cell. Basically, I want to have the below function in cell A1. I want to add a command to it to take the result and display it in cell A2.
The reason for this is that I need the cell to be selectable (it is generating a file name that needs to be selected and copied), but I don't want the code behind it to be seen. I can't find a way to make the cell selectable AND hide the formula from being seen when the cell is selected. This is because our people keep copying the formula rather than the resulting text.
I was hoping for something like a DISPLAYIN(target) function, but it doesn't seem to exist.
Im currently studying for an ICT A level and im in my first year doing AS. Im working the AQA board and i have a project that i have a target for an A! I need to create a system for a business and write a report on everything i did...wont go into detail. Anyway. i am having trouble with an IF FUNCTION!!! I have a cell (E35) that contains a percentage.
I want the IF function to display a message depending on what the percentage in cell E35 shows;
IF, 0>> Display "Bad"
40>> Display "OK"
70>> "Good"
90>> Display "Very Good"
E35>=100 >>>> Display "Excellent"
I have tried so many things and I was so sure i entered it correctly, but it keeps coming up with an error.
I wonder if the following is possible in the worksheet_open event. I want to be able to open my worksheet and see via a message box all the important features I need to look at.
Using column AG, Take the cells that are conditionally formatted to red, take the corresponding cells in column A & B and output this information in a message box.
I have a spreadsheet and in column D, I have look up formula which looks up value from another tab. What I want to do is if the look up finds #N/A or blank cell. There should be a message box appear warning that all the cells in column D might not be updated properly.
What I want to do is very similar to a Data Validation message, where a message pops up when you select a the cell. I want that message to be the value of another cell in the same worksheet.
I would also be open to a solution where you simply mouse over a cell to see a comment/message.
in column A of a spreadsheet a date needs to be entered manually, however i cannot have it so it can be backdated or a weekend. I have seen a message box pop up if you try and enter a date prior to today saying , Please enter todays date , then gives you an option Retry Or Cancel. But im not familiar with this function.
Is it possible to have this if a date is enter and is either a weekend or a date less than today ?
I've got results in row 3 - 16 386 and sometimes these results are exactly the same in some rows. What I now would need is row AB to display only one of each result and row AH to display how many percentages of the time this particular result appears.
I want to sort the information that will be displayed in a message box just before it's displayed, is this possible. I can't do this in the worksheet because it would conflict with how I have the worksheet sorted already. Here's the last portion of the code that will display what I want in the message box. I want to sort by the... Requested on: " & mpNames.Cells(i, 2).Text & " this column has a date and time in it and I want the sort to use this information to sort the message box.
If .Cells(i, "A").Value = mpTestName Then
mpMessage = mpMessage & mpNames.Cells(i, 1).Value & _ " (Requested on: " & mpNames.Cells(i, 2).Text & ", Leave type: " & mpNames.Cells(i, 3).Value & _ ", Start Date on: " & mpNames.Cells(i, 4).Text & ", End Date on: " & mpNames.Cells(i, 5).Text & ")" & vbNewLine & vbNewLine
End If Next i
If mpMessage "" Then
MsgBox mpMessage, vbOKOnly + vbInformation Else
MsgBox "Blah Blah Blah Blah Blah Blah Blah Blah", vbOKOnly + vbInformation End If End With End Sub
When the user enters a date (A1), that date is cross-referenced with a database to determine 1 of 3 results, in which the results are displayed in A3 as follows - Date out of range. (value="DOR"), No records exist. (Value="NRE"), Records exist. (Value="RE").
Once the date is entered and the corresponding value determined, I would like to have a ppo-up message appear with options:
Date out of Range. Message: "Date falls out of range of operating season. Please re-enter." ** I think I can use validation to take care of this. **
Message "Would you like to import data?" Yes - open external application No - default A1 to current date and await user input
Records Exist. Message " x Diamond Records; y Field Records; z Court Records " where x y z are numeric values based on lookup from the referenced database Message "Proceed to data" Yes - takes used to next new worksheep No - default A1 to current date and await user input
How / where do I code this to activate after the user enters a valid date?
I am looking for is VB code to firstly have a message box with an input box on (that bit i can do). The text and number put into the message box is then used to search the table for the information that relates to it.
The ideal would be for the code to find the data and then copy it either to the clipboard or to a section of the workbook.
The tables I am searching can be put into which ever format is easiest. Below is an example table;
I have been using the GetOpenFileName method and a message box to return the filepath of a file and saving the filepath in a variable called Filepath. This worked just fine.
What I want to be able to do is display the the file path at any time in a message box, but not sure how to do this. I tried displaying the message box in a form and was going to look for some way to call the form, but the form does not return the message.
My code for this is as follows:
Module 1 Sub getfilepath() Dim filepath As String filepath = Application.GetOpenFilename(FileFilter:="All Files (*.*), *.*", Title:="Select a file") UserForm1.Show End Sub
Userform 1 Private Sub OkButton_Click() Unload UserForm1 End Sub...........
I am just having a problem where at the end of my macro, the macro is looking for a value in a cell and there is no value at the end of the game for it to paste so I get an error. Instead of getting an error, I would like the macro to display, "You win!", if cell e1 is =1, "You lose!", if cell e1 is =2, and "tie game", if cell e1 is =0.
I'm a novice at VBA and I want a dialog box to display a welcome message once the user opens the excel file (worksheet). I can write the code to display a MsgBox but I can't make it to display the MsgBox once the file is open. I'm learning VBA by trial and error.
I have a count for each site for certain cloumn headers. But i want to collate these so that if there is a 1 in the column the it will output it with the column header. But there are 10 column headers and I would like to get a result that has all the columns with 1 in.
eg: a b c d e f g h i j k l m n o p q (Organic Suites) (Inorganic Suites) sitea 1 0 1 0 1 1 0 1 0 1 1 1 0 0 0 0 (O1 O3 O5 O6 O8 OS) (I1 I2)
I have a formula in A1 that I would like to execute from A2. I want the A1 to display the formula (so no "="), but I would like cell A2 to execute the formula in A1.
If A1 contains: "SUM(1+2)", how can I get A2 to display "3" without reproducing the formula?
A1: SUM(1+2) A2: ????
I suppose I'm looking for something like this: A2: ==A1 But, of course, that doesn't work.
If I do this it gets close: A2: ="="&A1
But that returns "=SUM(1+2)" instead of executing the formula.
