Compute And Display Result In Cell
Sep 26, 2009I have 15*2,14*2,14.5 in cell A1 and would like this to be computed and its result (i.e 72.5) displayed in cell A2. See below for clearer picture:
A1 A2
15*2,14*2,14.5 72.5
ADVERTISEMENT
Result Using If: Cell To Display The Word OK
Feb 11, 2009I have a formula on cell A1, if the result of this: =SUM(COUNTIF(F:F;M40);COUNTIF(M:M;M40)) is equal to 1, I want the cell to display the word OK.
I have tryed this but it didn't work:
=IF((SUM(COUNTIF(F:F;M40);COUNTIF(M:M;M40)))=1;"ok";"error")
Display Many Cell Result In Message Box
Nov 9, 2006i have a routine which loops through a range looking for past dates and when it finds one display the result in a message box in my testbook i only use 25 rows but it gets annoying having to click ok for every find....is it possible to collect all results and display them in the message box at one time?
Private Sub Workbook_Open()
Dim Mycell
Dim Rng
Set Rng = Sheets("Sheet1").Range("B1:B25")
For Each Mycell In Rng
If Mycell.Value < Date Then
MsgBox Mycell.Offset(0, -1).Value & " Is Overdue By " & Date - Mycell.Value & " Days, Take Action Now!", vbOKOnly, "Tasks Overdue"
End If
Next Mycell
End Sub
Display Result Of Formula In Cell
Nov 15, 2006Sub startup
Dim numwords As Integer
numwords = WorksheetFunction. CountA("H5:H64")
Range("H1").Select
Selection.FormulaR1C1 = numwords
I have a quick question regarding this simple code thats been drviing me nuts. There x distinct pieces of Data in the range speciifed, but when i run this code, the reply posted in cell H1 is 1, instead of x.
Eventually the code will be built to check if the result is odd or even and then add an entry into the first blank cell if the result is odd.
Define Cell To Display Formula Result In?
Jun 5, 2014I am trying to find a way to display text that is the product of a concatenate function in a defined cell, but not to have the function itself in that cell. Basically, I want to have the below function in cell A1. I want to add a command to it to take the result and display it in cell A2.
=CONCATENATE(C5,"_",'Attachment 3-A'!C9:E9,"_",IF(C5="","",IF(C6="MPL",IF(VLOOKUP(C5,MPL!B:F,5,FALSE)="Lease","Lease_Contributable",
IF(VLOOKUP(C5,MPL!B:F,5,FALSE)="Pre-Lease","Managed_Pre-Lease",
IF(VLOOKUP(C5,MPL!B:F,5,FALSE)="Non-Contributable","Managed_Non-Contributable","Error"))),
IF(VLOOKUP(C5,Sale!B:F,5,FALSE)="Assignable","Lease_Assignable","Managed_Non-Assignable"))))
The reason for this is that I need the cell to be selectable (it is generating a file name that needs to be selected and copied), but I don't want the code behind it to be seen. I can't find a way to make the cell selectable AND hide the formula from being seen when the cell is selected. This is because our people keep copying the formula rather than the resulting text.
I was hoping for something like a DISPLAYIN(target) function, but it doesn't seem to exist.
Display Cell Address Based On Result Of Combobox
Jan 29, 2013I have a combobox that returns me the names that are in a spreadsheet.
I need a return label, the index (address of that cell that the combobox returned), how do I do that?
Copy Cell To New Workbook & Compute Sum
Nov 29, 2007I've attached a Screen Shot of the of 2 Workbook, named Installation Tailgate 2007v1.xlsm and new workbook and i've also attached the excel program itseff in zip.
Installation Tailgate 2007v1 workbook, have a 13 column and nth number of rows ( and will keep growing)
columns D & E are hidden
columns G, I, K, M are checkboxes
if the user clicks on the command button it will copy and paste the selected cells on new workbook
unchecked cells on Installation Tailgate 2007v1 workbook should have a "0.00" on Child workbook.
then compute the Sum of Columns C, D, E, F, G, the total should be on last of their row
Compute Value Based On Multiple Cell
Jul 16, 2013I've been having a hard time with this i need a formula which will compute a value based on a multiple cell.
I have a cell (AQ) it contains the number of days a patient is in a center i need to countif the cell value is >=90 if it is it will then calculate the values in cell (AV) which is >- 1.4 and get the average of cells in AV.
Display Only One Of Each Result?
May 2, 2014I've got results in row 3 - 16 386 and sometimes these results are exactly the same in some rows. What I now would need is row AB to display only one of each result and row AH to display how many percentages of the time this particular result appears.
View 14 Replies View RelatedIf Number =1 Display The Result
Feb 10, 2009I have a count for each site for certain cloumn headers.
But i want to collate these so that if there is a 1 in the column the it will output it with the column header. But there are 10 column headers and I would like to get a result that has all the columns with 1 in.
eg:
a b c d e f g h i j k l m n o p q (Organic Suites) (Inorganic Suites)
sitea 1 0 1 0 1 1 0 1 0 1 1 1 0 0 0 0 (O1 O3 O5 O6 O8 OS) (I1 I2)
Sum A Column And Then Display The Result
Jan 15, 2010I want to sum a column and then display the result but in the same cell put some text:-.....
View 4 Replies View RelatedDisplay Formula In A1, Result In A2
Sep 26, 2007I have a formula in A1 that I would like to execute from A2. I want the A1 to display the formula (so no "="), but I would like cell A2 to execute the formula in A1.
If A1 contains: "SUM(1+2)", how can I get A2 to display "3" without reproducing the formula?
A1: SUM(1+2)
A2: ????
I suppose I'm looking for something like this:
A2: ==A1
But, of course, that doesn't work.
If I do this it gets close:
A2: ="="&A1
But that returns "=SUM(1+2)" instead of executing the formula.
VBA Code To Display Result In Message Box
Dec 6, 2012I have 4 columns in a worksheet.
A B C D
number type date name
I am using an input box to enter the value of column D. After the value of column D is entered, I want a message box that displays the corresponding data in column A and B. with the vba coding?
Find Next Result Display In Message Box?
Sep 13, 2013creating a .Find code to search a range on a sheet and then display each result seperately in a msgbox. An inputbox will be the value .find searches the range for.
the msgbox needs to be a vbyesno
VB:
'SEARCH CODE
Dim myItem As String, myRNG As Range, NewLoc As String
Dim Found As Range [code].....
How To Display Result From Left Of Max Formula
Mar 6, 2014I am using the below formula to find the latest date (column N) based on fund (column G) and Vendor (column O) reference. How can I find (column I) where the balance of that payment is? I know there are formulas like INDIRECT RC[-1] but how to add them to my formula.
{=MAX(IF(Payments!G:G=B4,IF(Payments!O:O=C4,Payments!N:N)))}
If / Vlookup Display Result Not Formula
Dec 8, 2009Hopefully you will be able to help again. Is it possible to do a vlookup that references data on other tabs within the worksheet so that the result of the formula is in the cell not the formula.
So if my vlookup was =vlookup(a2,$a$1:$b$12,3,0) and the result was john smith i want just john smith in the cell. I know about copy and paste values but i was looking for a more automatic way. One that doesn't need intervention.
Display Result And Hide Macro Formula
Mar 17, 2009Excel 2003.
I have been struggling for an hour how to hide a number to text macro in a way that only macro result is displayed in a cell.
(I have one 2-3 years old xls, where I have managed with task, but now can't figure out how and how to unhide the macro
Can it be password protected somehow?
Stop Displaying Formula - Display Result
Jun 10, 2006I entered a simple formula in a cell =B14*B16 but it won't calculate. The cell only displays the formula and not the result. tell me what I did wrong. I've attached a sample.
View 2 Replies View RelatedDisplay Result Of Date Function In Label
Dec 13, 2007I am trying to display the result of a custom VBA function as a label on a userform. The function is called and takes arguments from three text boxes on the userform. I attached it to the exit parameter. (This may be part of the problem; I'm not sure).
There seem to be two problems, first all the text boxes don't always contain data, but because the arguments are not optional, I get a type mismatch error when the code runs (I tried switching some of them to optional, but it didn't help as you can see from my 'commented code).
The other problem is that even when all the arguments seem to be met (i.e. the text boxes all have data), I still get a compile error that the argument is not optional. This only happens if I try and pass the result to some aspect of the userform. As you can see from the last coded line in the custom function, if I assign it to a range on the worksheet, it functions fine.
Private Sub txtStartDate_Exit(ByVal Cancel As MSForms.ReturnBoolean)
Dim StartDate As Date
Dim EndDate As Date
If IsDate(Me.txtStartDate.Value) Then
StartDate = Me.txtStartDate.Value
Me.txtStartDate.Value = Format(StartDate, "m/d/yyyy")
Else: MsgBox "Please enter a date"
End If.............
Display Result Based On Time Difference
Feb 15, 2008I want to make a formula based on 2 times ex: 10:07:00 and 10:09:00. This formula should display "intime" if the diference between both is under 20 minutes, "outime" if the diference is above 20 minutes and it should display "error" if the time is under 0 minutes (this will only happen when someone makes a mistake typing in the time. For example 10:37:00 and 10:36:00)
View 3 Replies View RelatedIdentify MAX Value From Two Columns And Display Result In Other Column In Pivot?
May 30, 2013I have a pivot table and perhaps that isnt the best way to do this. (Sample attached). Ultimately I need to display two columns only:
Application (ColA) Business (ColC)
There are three columns of data.
Applications (ColA) Usage(ColB) Business (ColC)
There are multiple instances of the same application in ColA, ColB has usage =true or blank and ColC has multiple instances of the same business.
Based on the count of Application in ColA, and the count of Usage =True, I need to return the Business with the MAX count.
Note: the usage cannot be a filter, it must be a count.
Search For Multiple Items And Display Result Of Word
Jun 16, 2014I Want to fetch a data as below.
ITEM RESULT
M&C_ES_F_55+_Phase1 <55>
M&C_BR_F_18-34_Phase1 <18-34>
M&C_ES_F_35-54_Phase1 <35-54>
Likewise there are many line items, wherein i want the Age should be searched in ITEM column and should be displayed in the RESULT column.
* I don't want to Use text to column method, is it possible to use IF condition along with Search formula.
Filter Using Userform And Display Whole Row Of Search Result On Textboxes
Apr 17, 2014Currently I am working on a data entry form for CRM database using Excel. Now i am stuck at filtering and displaying the data from the spread sheet to the user form.
There are three text boxes to key in the filter criteria and a button which will filter the data from the spreadsheet based on the criteria in the three text boxes. Then the whole row where the filtered data resides will be displayed on text boxes on the user form.
CMD Prompt Code And Display Result (Hostname Or IPConfig)
May 31, 2014Is there a way to use cmd prompt via vba?
I would like to run "HOSTNAME" and have that displayed as msgbox text.
I am hoping its fairly simple and diverse so I can just change the cmd code to suit.
E.g.
Code:
private sub gethost()
dim host as long
host = (CMDRUN) "HOSTNAME"
msgbox "your host name is " & host
There must be a way so would like to see but I am struggling to get results on search engines.
Create SQL Query In VBA And Display Result As Table In Worksheet
Feb 3, 2010I need the VBA script in excel that will do a SQL Query, for this case I need to select a value where there are 2-3 tags and between certain period then display the result as a table in a worksheet.
Example I have a database with 3 types of tags "Tag A", "Tag B", and "Tag C", and each tag have a value with different timestamp. the database looks like this:
No. Timestamp Tags Value
1 1-Jan-2010 Tag A 18
2 1-Jan-2010 Tag C 20
3 2-Jan-2010 Tag A 20
4 3-Jan-2010 Tag B 17
5 3-Jan-2010 Tag C 19
6 4-Jan-2010 Tag B 18
7 4-Jan-2010 Tag A 20
8 5-Jan-2010 Tag A 22
9 5-Jan-2010 Tag B 18
10 5-JAn-2010 Tag C 20
VLOOKUP Formula Dragdown Copies Previous Cell Result Instead Of Unique Result
Jun 10, 2014When I drag my VLOOKUP formula down a column in Excel 2010, the return value copies the formula result from the original VLOOKUP formula result. For example, if the first VLOOKUP returns a value of 0.5, I expect to see 0.5 or 1 in the cell below that one. However, I get 0.5 which is not the expected result for the cell below.
When, I click the fx on the cells below, the expected return values appear in the formula result. After I click OK, the expected formula results updates and now appears in the cell.
I'm not sure what is causing this issue. My computer was updated recently from an old machine to a new one. I have never experienced this issue before.
Display The Path Result From A Floyd Algorithm Matrix Output
Aug 8, 2009I want to display the path result from a Floyd Algorithm matrix output..
You can download the excel file here : http://ifile.it/lw4tgic
It consists of 1044 nodes, and we need to find the path between 2 nodes for ALL pairs..
Now, to find the path between 2 nodes, we need to :
1. Find the resulting cell of corresponding 2 nodes (y to x = z)
2. Update the path with that value (y z x)
3. For all the direct pairs in the current path (yz, zx), find the resulting cell
4. If destination (x) not the same with result (z) then repeat step 1 for that pairs.
5. repeat until x = z for all pairs.
Maybe it's better if i use an example....
we'll use T01 to E78 as an example
T01-E78 = if you look in the table,
y (vertical) = T01,
x (horizontal) = E78
z (result) = E77, so
T01-E78 = E77, so path = T01-E77-E78
check if result of T01-E77 = E77 (x = z?)...........................
Count The Number Of Entries In A Data Validation Dropdown List And Display A Result.
Nov 7, 2007I am trying to do 2 things involving data validation. 1) Count the number of entries in a data validation dropdown list and display a result. 2) Use an If statement to pull the formatting from a cell into another cell.
An example would be if Cell A1="A", then show the drop down list associated with cell or sheet "!ryanB2". Alternatively, I would like to also display the number of entries in the drop down list.
Compute The SCORE
Jan 20, 2009i was assigned to make a computation for our individual scores using this:
EMPLOYEES A-N
inputs:
SURVEY(0-100)
LH(lost hour)
AHT(average handling time)
compute for:
SCORE
RANK
the SCORE has a total of 100%
so to get the SCORE, each input gets a percentage: SURVEY=40% LH=30% AHT=30% then added.
but the thing is LH and AHT has an equivalent.
LH
0 to 1=100
1.1 to 2=90
2.1 to 3=80
3.1 to 4=70
4.1 to 5=60
5.1 above=20......
eXAMPLE:
EMPLOYEE A
SURVEY(0-100) = 33.00
LH(lost hour) = 12.00
AHT(average handling time) = 14.20
SCORE = CODE
RANK = CODE
now for the rank i just use the code =RANK(SCORE A, SCORE A:SCORE N)
im lost on how to compute the SCORE though coz i can just use =((SURVEY*40%)+(LH*30%)+(AHT*30%))
but the one that needs to be on the LH and AHT are the equivalents and not the inputs.
and there is 1st 2nd and 3rd place. the name of the top 3 employees should be shown under the table.
Formula To Display Column Header As Result When Any Value Exists In Cells Under Column
Jul 25, 2014I am trying to write a formula where the column header of the row in which a value other than 0 exists, will display for each instance (row) where a value exists in an array spanning 3 columns. So the result cell could be any of the three column headers, or a combination thereof.
I started the formula in P2 of the GL Detail-2012 tab. File attached.
Here is what I started: =INDEX($M$1:$O$1,SUMPRODUCT(COUNTIF($M$2:$O$67756,))). Not working.