Display Message When Cell Is Empty On Save?
Nov 4, 2012
I am using this code to display a message when a range is empty on workbook save. Case "A" gives an error when referring to a range, the second case works fine. How can I change it?
Code:
Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, Cancel As Boolean)Select Case Worksheets("Sheet1").Range("B6").ValueCase "A" If Worksheets("Sheet2").Range("D104:D109").Value = "" Then MsgBox "Cells cannot be empty!" Exit SubCase "B", "D", "F" If Worksheets("Sheet2").Range("D112").Value = "" Then MsgBox "Cells cannot be empty!"Case ""End SelectEnd Sub
View 4 Replies
ADVERTISEMENT
Dec 17, 2012
I have a spreadsheet and in column D, I have look up formula which looks up value from another tab. What I want to do is if the look up finds #N/A or blank cell. There should be a message box appear warning that all the cells in column D might not be updated properly.
View 4 Replies
View Related
Jun 24, 2014
I have a workbook that can open a URL into IE when a project number is entered in an input box.
What I would like to happen is that if the project number entered does not have a URL against it and the value is #N/A, then the message box will display "Project does not exist". However if the number does exist, I want a different message box to be displayed which is a yes/no box.
The code below is what I have tried which works fine if the cell value is #N/A but when it is not it throws an Run-Time error 13: Type mismatch
Code:
Sub SearchPidsMessageBox()
Dim Answer As String
Dim MyNote As String
[Code]....
View 2 Replies
View Related
Nov 9, 2006
i have a routine which loops through a range looking for past dates and when it finds one display the result in a message box in my testbook i only use 25 rows but it gets annoying having to click ok for every find....is it possible to collect all results and display them in the message box at one time?
Private Sub Workbook_Open()
Dim Mycell
Dim Rng
Set Rng = Sheets("Sheet1").Range("B1:B25")
For Each Mycell In Rng
If Mycell.Value < Date Then
MsgBox Mycell.Offset(0, -1).Value & " Is Overdue By " & Date - Mycell.Value & " Days, Take Action Now!", vbOKOnly, "Tasks Overdue"
End If
Next Mycell
End Sub
View 4 Replies
View Related
Dec 12, 2007
I want to display a comment/note that is always visible however:
*The text in the comment should change "only when" the user of my worksheet "clicks" on a specific cell in the worksheet;
*I do not want that a comment appears/disappears/ changes when the mouse moves over any of the cells
*I do want that the same comment/note is used to display different text when the user clicks on another cell in the worksheet
*I do want that the user can position this comment on his screen where he wants it to be.
View 2 Replies
View Related
Feb 21, 2007
Im currently studying for an ICT A level and im in my first year doing AS. Im working the AQA board and i have a project that i have a target for an A! I need to create a system for a business and write a report on everything i did...wont go into detail. Anyway. i am having trouble with an IF FUNCTION!!! I have a cell (E35) that contains a percentage.
I want the IF function to display a message depending on what the percentage in cell E35 shows;
IF, 0>> Display "Bad"
40>> Display "OK"
70>> "Good"
90>> Display "Very Good"
E35>=100 >>>> Display "Excellent"
I have tried so many things and I was so sure i entered it correctly, but it keeps coming up with an error.
View 9 Replies
View Related
Apr 8, 2008
I wonder if the following is possible in the worksheet_open event. I want to be able to open my worksheet and see via a message box all the important features I need to look at.
Using column AG,
Take the cells that are conditionally formatted to red, take the corresponding cells in column A & B and output this
information in a message box.
View 9 Replies
View Related
Feb 12, 2014
In cell D1 of sheet 2, I want the cell reference to be displayed of the next available cell in column A of sheet1
for example if cells A1:A238 in sheet1 are populated the cell D1 of sheet2 will display A239
View 5 Replies
View Related
Apr 10, 2009
I would like to sum Column BD and place the results in the first empty Cell in Collumn AZ. Then delete Columm BD.
View 2 Replies
View Related
Mar 31, 2009
What I want to do is very similar to a Data Validation message, where a message pops up when you select a the cell. I want that message to be the value of another cell in the same worksheet.
I would also be open to a solution where you simply mouse over a cell to see a comment/message.
View 9 Replies
View Related
Apr 14, 2014
I wrote an IF AND formular to display "Yes" for a cell with zero. but when the cell is also empty, it still returns a "Yes" instead of empty.
this is the formular:
=IF(J2=3,"Yes",IF(AND(E2="",I2=0),"Yes","No"))
when I2 = 0 it returns Yes
Also with I2 = "", it still returns "Yes" instead of "No"
View 6 Replies
View Related
Mar 14, 2013
I have attached the spreadsheet for reference. All other sheets pull information from the WHITE sheet.
I want the columns for unit price, discount and total to be set to two decimal places but I also don't want it to show anything if the field has a 0 value (so if i only have a few items I don't get lots of o's).
To get the field to not display a 0 if it is empty on the WHITE sheet I have been using "0;-0;;@" which I found on the net. If I use this then it negates the two decimal places.
This also includes the WHITE sheet.
View 3 Replies
View Related
Sep 5, 2007
Im trying to find a formula that when a cell is empty ie this cell is linked to another cell on another worksheet and info has not been entered or is 0 then i want the cell to display the the current date ie =NOW()
View 10 Replies
View Related
Jan 24, 2009
in column A of a spreadsheet a date needs to be entered manually, however i cannot have it so it can be backdated or a weekend. I have seen a message box pop up if you try and enter a date prior to today saying , Please enter todays date , then gives you an option Retry Or Cancel. But im not familiar with this function.
Is it possible to have this if a date is enter and is either a weekend or a date less than today ?
View 9 Replies
View Related
Aug 18, 2006
I'm trying to check and prompt a message box if there is a empty cells found in the pivot table.
If Activesheet.PivotTables("PivotTable1").NullString = "" Then
MsgBox "No Match Data Found"
End If
I have try out the code caption above but not the result as I want.
View 7 Replies
View Related
May 28, 2014
Is it possible to format the message box display? I need to display currency format, how can this be done?
View 3 Replies
View Related
Feb 17, 2008
I want to sort the information that will be displayed in a message box just before it's displayed, is this possible. I can't do this in the worksheet because it would conflict with how I have the worksheet sorted already. Here's the last portion of the code that will display what I want in the message box. I want to sort by the... Requested on: " & mpNames.Cells(i, 2).Text & " this column has a date and time in it and I want the sort to use this information to sort the message box.
If .Cells(i, "A").Value = mpTestName Then
mpMessage = mpMessage & mpNames.Cells(i, 1).Value & _
" (Requested on: " & mpNames.Cells(i, 2).Text & ", Leave type: " & mpNames.Cells(i, 3).Value & _
", Start Date on: " & mpNames.Cells(i, 4).Text & ", End Date on: " & mpNames.Cells(i, 5).Text & ")" & vbNewLine & vbNewLine
End If
Next i
If mpMessage "" Then
MsgBox mpMessage, vbOKOnly + vbInformation
Else
MsgBox "Blah Blah Blah Blah Blah Blah Blah Blah", vbOKOnly + vbInformation
End If
End With
End Sub
View 9 Replies
View Related
Dec 18, 2008
When the user enters a date (A1), that date is cross-referenced with a database to determine 1 of 3 results, in which the results are displayed in A3 as follows - Date out of range. (value="DOR"), No records exist. (Value="NRE"), Records exist. (Value="RE").
Once the date is entered and the corresponding value determined, I would like to have a ppo-up message appear with options:
Date out of Range.
Message: "Date falls out of range of operating season. Please re-enter." ** I think I can use validation to take care of this. **
Message "Would you like to import data?"
Yes - open external application
No - default A1 to current date and await user input
Records Exist.
Message " x Diamond Records; y Field Records; z Court Records " where x y z are numeric values based on lookup from the referenced database
Message "Proceed to data"
Yes - takes used to next new worksheep
No - default A1 to current date and await user input
How / where do I code this to activate after the user enters a valid date?
View 9 Replies
View Related
Mar 30, 2009
I am looking for is VB code to firstly have a message box with an input box on (that bit i can do). The text and number put into the message box is then used to search the table for the information that relates to it.
The ideal would be for the code to find the data and then copy it either to the clipboard or to a section of the workbook.
The tables I am searching can be put into which ever format is easiest. Below is an example table;
A B C D E
1 A.1 Side Road Correctly Left
2 A.2 Hit in Rear Left
3 A.3 No known Police ref
4 A.4 Vandalism
View 9 Replies
View Related
Aug 11, 2009
code that would generate the 'Not Found' message
I have a date in HC4, which appears in column 112, so cannot understand why it finds nothing ?
Sub Macro6()
Dim C1 As Range
Application.Goto Reference:="CURRENT"
Selection.Copy
Set C1 = Range(Cells(4, 8), Cells(4, 200)).Find(Range("HC4").Value)
If Not C1 Is Nothing Then
C1.Offset(1, 0).PasteSpecial Paste:=xlPasteValues
Else
MsgBox "Not found"
End If
Range("A1").Select
End Sub
View 9 Replies
View Related
Jan 12, 2010
I have been using the GetOpenFileName method and a message box to return the filepath of a file and saving the filepath in a variable called Filepath. This worked just fine.
What I want to be able to do is display the the file path at any time in a message box, but not sure how to do this. I tried displaying the message box in a form and was going to look for some way to call the form, but the form does not return the message.
My code for this is as follows:
Module 1
Sub getfilepath()
Dim filepath As String
filepath = Application.GetOpenFilename(FileFilter:="All Files (*.*), *.*", Title:="Select a file")
UserForm1.Show
End Sub
Userform 1
Private Sub OkButton_Click()
Unload UserForm1
End Sub...........
View 9 Replies
View Related
Mar 2, 2007
I am just having a problem where at the end of my macro, the macro is looking for a value in a cell and there is no value at the end of the game for it to paste so I get an error. Instead of getting an error, I would like the macro to display, "You win!", if cell e1 is =1, "You lose!", if cell e1 is =2, and "tie game", if cell e1 is =0.
View 9 Replies
View Related
Mar 6, 2008
I'm a novice at VBA and I want a dialog box to display a welcome message once the user opens the excel file (worksheet). I can write the code to display a MsgBox but I can't make it to display the MsgBox once the file is open. I'm learning VBA by trial and error.
View 2 Replies
View Related
Apr 28, 2014
I have a spreadsheet saved. Its a report with formulas in. I have saved this as a master copy and when opening you can only open in read only or enter a password to open to edit. The report is produced monthly, so each moth the master is opened and the user has to save the ss with a new file name.
I want to put VBA code so that when a they open the ss in read only. a popup box appears asking to them to "Save the Report Now" with a save as button. This would then open the Save As window
View 2 Replies
View Related
Dec 6, 2012
I have 4 columns in a worksheet.
A B C D
number type date name
I am using an input box to enter the value of column D. After the value of column D is entered, I want a message box that displays the corresponding data in column A and B. with the vba coding?
View 9 Replies
View Related
Sep 13, 2013
creating a .Find code to search a range on a sheet and then display each result seperately in a msgbox. An inputbox will be the value .find searches the range for.
the msgbox needs to be a vbyesno
VB:
'SEARCH CODE
Dim myItem As String, myRNG As Range, NewLoc As String
Dim Found As Range [code].....
View 7 Replies
View Related
Mar 4, 2009
I need it to display the message if findstring has been found more than once (i.e Twice)
View 6 Replies
View Related
Apr 22, 2009
I need a program for my user form such that it displays an error message.
I have created an user form with employee name ,task and remarks.
I need a program in such a way if an user clicks the "submit" button without entering all the fields in the user form, an "error message" should be displayed.
The submit button has to work only if all the fields are filled by the user.
View 10 Replies
View Related
Jun 11, 2009
I have a spreadsheet and a macro that creates a new sheet and enters some data into the sheet. The user gets to make some changes to the created sheet and then prints it out. I was wandering if there was any way to have a message coming up every 10 minutes remindnig the user about the new sheet untill it was printed out and then the warnings would stop. Could anyone sugest a good way to do that?
View 7 Replies
View Related
Jul 8, 2009
I want to display a message box to user upon opening a file. When the message box is displayed I want to display two buttons.
Button 1 = “Continue”
Button 2 = “Cancel”
If the user selects button 1 (“Continue”), I want the file to remain open and the message box will close.
If the user selects button 2 (“Cancel”), I want the file to close.
There is one condition that must be met for the “Continue” button. The message contains some disclaimer information. When the message box first appears on the screen, the “Continue” button is disabled. To make the “Continue” button active, I want to add a Check Box to the Message Box with a caption that reads “I agree to the Terms and Conditions”. Once the user places a checkmark in the Check Box, the “Continue” button will become active.
View 3 Replies
View Related