IF Function To Display A Message Depending On Percentage In Cell

Feb 21, 2007

Im currently studying for an ICT A level and im in my first year doing AS. Im working the AQA board and i have a project that i have a target for an A! I need to create a system for a business and write a report on everything i did...wont go into detail. Anyway. i am having trouble with an IF FUNCTION!!! I have a cell (E35) that contains a percentage.

I want the IF function to display a message depending on what the percentage in cell E35 shows;

IF, 0>> Display "Bad"

40>> Display "OK"

70>> "Good"

90>> Display "Very Good"

E35>=100 >>>> Display "Excellent"

I have tried so many things and I was so sure i entered it correctly, but it keeps coming up with an error.

View 9 Replies


ADVERTISEMENT

Assign A Score Value To The Cell That Contains A Percentage Depending On A Range

May 2, 2007

I have a spreadsheet with several columns that have percentages as a whole number and with a decimal format. I need assign a score value to the cell that contains a percentage depending on a range.

For example:

If cell A1 has a value between 97%-100% then A2 should display "15", however if A1 has a value of 90%-96% then it should display "12" and if A1 has a value of less than 89% then it should display "0".

View 9 Replies View Related

Message Box Depending On Cell Value

Aug 29, 2008

What i want is for a message box to appear automatically when the workbook is opened ONLY if Cell C4 (which is merged to F4)...

If there is information in this box then do not run macro

in the message box I want a box you can type in that will enter that information into cell C4. I know I will have to us a user form but what is the code I need?

View 9 Replies View Related

Message Box Depending On Cell Value ...

Sep 4, 2008

I have a range C20:C38

In this range I have 15 codes that can be put in. If one of these codes is typed in incorrectly then a message box will appear stating "this code is incorrect please re-do"

can anyone help?

a few of the codes are
"S" "F" "O"

View 9 Replies View Related

Excel 2010 :: Data Validation With Custom Function And Message Box Display

Feb 24, 2014

I have four cells c1 thru c4. The SUM of these cells must equal 1. I want to display an error message "sum of cells not equal to 1.0" but only when data has been entered in all four cells.

For instance =SUM(C1:C4, "<>1") should display the error message. Is there a way to write the formula with an IF statement and still use data validation with error message box?

Assumptions:
-Will ignore blanks
-Error message "Sum of cells are not equal to 1.0" until values in all four cells have been entered, not after a value is entered in a cell. (validate expression after all four cells have values or blank)

Scenarios:
c1 = .25, c2 is blank, c3 = .25, c4 = .50 TRUE no error message should displays
c1 = .25, c2 = .25, c3 = .25, c4 = .50 TRUE no error message should displays
c1 = .25, c2 = .30, c3 = .25, c4 = .50 FALSE error message should display after value is entered in c4
etc

What I don't want is for the error message box to display after .25 is entered in c1 because the user is still in the process of adding values. Can this be done using Data Validation in Excel 2010?

View 2 Replies View Related

Lookup Percentage Formula Depending On Price Entered In Cell?

Jan 28, 2013

I have the following table in excel:

Price: Percentage:
$150 10%
$100 12%
$50 14%

I'm trying to use the percentage depending on what price I enter in a cell. For example; if I enter $135 then 10% will be used, if I enter $65 then 12% will be used, and if I enter $47 then 14% will be used.

View 3 Replies View Related

Display Zero Percentage In Single Cell?

Jun 25, 2012

I would like to display the zero percent (0.00%) value in a single cell on a worksheet. Typically, there will be a positive value input in the cell such as 3.50% but occasionally it will require a zero value. When I type the zero value, the cell is displays a blank. I do not want to show zero values on the remainder of the worksheet.

View 2 Replies View Related

Increase That Amount By A Percentage Identified In Another Cell And Display The Value Only Without Any Formalas In A New Cell

Jan 19, 2009

If a cell is not blank, then increase that amount by a percentage identified in another cell and display the value only without any formalas in a new cell. To this end I wrote this IF statement:

=IF(I2>0,CP9=(CA9*I2/100)+CA9,CP9="")

Observation: I see a FALSE in CS9 where this IF statement exists, however, CP9 does not display the required value.

View 8 Replies View Related

Formula To Have One Cell Display Multiple Options Depending On Value In Another Box

Oct 1, 2013

I need to build a formula to have one cell display multiple options depending on a value in another box.

If Value is >x and <x display Y

Details:

Cell D5 Holds a dollar amount. E5 is where the calculation will happen. Logically i need it to do the following exactly:

If D5 is between 5000 and 9999, display 75. If D5 is between 10000 and 14999 display 150. If D5 is between 15000 and 19999 display 200. If D5 is >20000 display 250.

View 2 Replies View Related

Cell B1 To Display True If Any Of The Values In Column C Match Otherwise I Want To Display FalseOR Function Confusion

Dec 16, 2008

Example:....

i m wanting Cell B1 to display true if any of the values in column C match otherwise I want to display false.

A 1
B 0
C 0
D 0

But I can't determine how to get this done.

View 5 Replies View Related

Display Different Message Box Based On Cell Value?

Jun 24, 2014

I have a workbook that can open a URL into IE when a project number is entered in an input box.

What I would like to happen is that if the project number entered does not have a URL against it and the value is #N/A, then the message box will display "Project does not exist". However if the number does exist, I want a different message box to be displayed which is a yes/no box.

The code below is what I have tried which works fine if the cell value is #N/A but when it is not it throws an Run-Time error 13: Type mismatch

Code:
Sub SearchPidsMessageBox()
Dim Answer As String
Dim MyNote As String

[Code]....

View 2 Replies View Related

Display Many Cell Result In Message Box

Nov 9, 2006

i have a routine which loops through a range looking for past dates and when it finds one display the result in a message box in my testbook i only use 25 rows but it gets annoying having to click ok for every find....is it possible to collect all results and display them in the message box at one time?

Private Sub Workbook_Open()
Dim Mycell
Dim Rng
Set Rng = Sheets("Sheet1").Range("B1:B25")
For Each Mycell In Rng
If Mycell.Value < Date Then
MsgBox Mycell.Offset(0, -1).Value & " Is Overdue By " & Date - Mycell.Value & " Days, Take Action Now!", vbOKOnly, "Tasks Overdue"
End If
Next Mycell
End Sub

View 4 Replies View Related

Display Message By Clicking Cell

Dec 12, 2007

I want to display a comment/note that is always visible however:

*The text in the comment should change "only when" the user of my worksheet "clicks" on a specific cell in the worksheet;
*I do not want that a comment appears/disappears/ changes when the mouse moves over any of the cells
*I do want that the same comment/note is used to display different text when the user clicks on another cell in the worksheet
*I do want that the user can position this comment on his screen where he wants it to be.

View 2 Replies View Related

Display Message When Cell Is Empty On Save?

Nov 4, 2012

I am using this code to display a message when a range is empty on workbook save. Case "A" gives an error when referring to a range, the second case works fine. How can I change it?

Code:

Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, Cancel As Boolean)Select Case Worksheets("Sheet1").Range("B6").ValueCase "A" If Worksheets("Sheet2").Range("D104:D109").Value = "" Then MsgBox "Cells cannot be empty!" Exit SubCase "B", "D", "F" If Worksheets("Sheet2").Range("D112").Value = "" Then MsgBox "Cells cannot be empty!"Case ""End SelectEnd Sub

View 4 Replies View Related

Display Cell Data In Message Box Based On Colour

Apr 8, 2008

I wonder if the following is possible in the worksheet_open event. I want to be able to open my worksheet and see via a message box all the important features I need to look at.

Using column AG,
Take the cells that are conditionally formatted to red, take the corresponding cells in column A & B and output this
information in a message box.

View 9 Replies View Related

Get And Display Pictures (in Folder On Hard Drive) Depending On Cell Value In Excel Sheet?

Sep 9, 2012

I am working to make an automatic result card in which excel automatically gets data of every student which is present in sheet within the workbook by simply writing roll number of the student in a cell. and i have done it easily by Vlookup and index functions but the only problem i am facing is, that i want to show the picture of each student by roll no. pictures are in one folder on my hard drive, now i want that as the roll number of the student is written the result excel should display the picture (from the folder, each picture named by roll)of the student. for example i write 1234 in roll no cell and want to get and show the picture no 1234 in another cell. (from the folder)

View 2 Replies View Related

Macro To Find First Empty Cell In Column And Display Message Box

Dec 17, 2012

I have a spreadsheet and in column D, I have look up formula which looks up value from another tab. What I want to do is if the look up finds #N/A or blank cell. There should be a message box appear warning that all the cells in column D might not be updated properly.

View 4 Replies View Related

When Selecting A Cell I Want A Message To Display The Value Of Another Cell

Mar 31, 2009

What I want to do is very similar to a Data Validation message, where a message pops up when you select a the cell. I want that message to be the value of another cell in the same worksheet.

I would also be open to a solution where you simply mouse over a cell to see a comment/message.

View 9 Replies View Related

Warning Message :: When A Particular Cell Function Result Is A Specific Number

Aug 23, 2007

I want to have a warning message appear when a particular cell function result is a specific number, probably very simple to achieve.

View 9 Replies View Related

Add Percentage To Value - Display At X

Apr 8, 2014

I have a whole number (207) in B5. This should be seen as a percentage (207%).

I want to add this percentage to the value in M15, which is not a percent (2705.8).

I would like to display this sum in M17.

The number that is displaying now, after simply putting 207% (I don't want the % symbol in there) in B5, and the formula =sum(M17,B5) in M17 is 270787%.

This is obviously not correct.

View 3 Replies View Related

Percentage Display

May 13, 2009

I've seen a few finance excel sheets lately (don't have an example right now... ) that have a total number for something and then in parentheses next to it a percentage of the total is automatically calculated. So I have 5 pens and that's 10% of what I have in my pencil cup --> 5 (10%) is how it is displayed.

View 3 Replies View Related

Calculate & Display Percentage

Oct 27, 2006

how to display a percentage in a field in excel.

EG.

If I have a calculated price in cell A and I would like to enter a price manualy in cell B , how would I get excel to display in another cell what perecentage A is of B

price A would would be for example a purchase price , Price B would be a suggested retail price entered manualy and i would want cell C to show me what percentage increase it is of price A

View 4 Replies View Related

Display Percentage Of In Pivot Table

Apr 4, 2008

I have 2 columns in a Pivot Table. One called Sum of AD Total, the other called Sum of Total Cost.

I want to add a third field that displays the Sum of AD Total as a percentage of the Sum of Total Cost.

So I assumed I would use the "% Of" facility in the "Show data as" drop down, and "Total Cost" in the Base Field drop down. But what goes in the Base item field as whenever I try and put something in I get N/A returned as a result in my PT?

I'm attaching a very simplified version.

View 3 Replies View Related

List To Display Value Depending On Certain Columns

Apr 24, 2013

I am developing a workbook, one part of the book is to track discipline I have a page for this and a userform on the front page to enter data into it. I would like if you will a summary box (list box or whatever is best) displayed on the front page and I would like a line to appear in that box maybe saying john smith requires a warning. I need this to appear if john smith has been entered 3 times into the name column on the discipline sheet however only if the offence is the same 3 times for example 3 lates not 2 lates and 1 non attendance.

After it displays this line in the summary box I would like to be able to double click it where a small userform appears where a user can then select discipline received or something and for this lien to disappear in the summary and all 3 entries in the discipline sheet.

View 9 Replies View Related

Display R, A Or G Depending On Text In 2 Other Cells

Apr 15, 2009

I am trying to nest a formula with IF & AND to work out a RAG status. I have 2 questions per row (in Columns I:J) which will be answered either Yes or No. For each combination I need to give a RAG status in Column K e.g. two Yes replies give Green, 2 No replies give no and one No out of 2 will give Amber

Below is hoped for response in Column K:

ColI---Col--- JCol K
Q1----Q2----RAG
Yes---Yes---G
Yes---No----A
No----Yes---A
No----No----R

View 3 Replies View Related

Display Time Depending On Weekday

Aug 15, 2007

I have a date that is customised into dd-mmm-yy dddd eg 14-Aug-07 Tuesday in cell A1. I need help in formulating a formula to identify if the date in A1 is friday, to return "5:30 pm", else "6:00 pm" in cell B1.

View 5 Replies View Related

Display Popup When Percentage Difference Reached

Feb 16, 2008

I have an excel file that linked to an external feed that receives stock prices in real time. on the file i have the stock name, the price paid and the current price. I would like to have a popup that shows up whenever a stock price has a 15% or higher return. I would like the popup to show the stock name. I realise that conditional formatting would highlight whatever is over 15%, but the workbook has multiple worksheets and I would like it to popup even when i am on another worksheet.

Enclosed is a copy of the file (the actual file has many more sheets) : john.zip

View 5 Replies View Related

Macro To Display Status Progression With Percentage

May 18, 2014

Display progress bar with percentage completion.

The below code just display macro is running without notifying user the percentage of completion.

[Code] .....

View 2 Replies View Related

Display Popup When Percentage Difference Reached

Feb 16, 2008

I have an excel file that linked to an external feed that receives stock prices in real time. on the file i have the stock name, the price paid and the current price. I would like to have a popup that shows up whenever a stock price has a 15% or higher return. I would like the popup to show the stock name. I realise that conditional formatting would highlight whatever is over 15%, but the workbook has multiple worksheets and I would like it to popup even when i am on another worksheet. enclosed is a copy of the file (the actual file has many more sheets)

View 4 Replies View Related

Index Function To Display Results In Same Cell

May 29, 2014

I'm currently using this formula:

=INDEX(B4:B64,MATCH(I5,A4:A64,0))

If I5's value is displayed more than 1 time in Column A, I want the information in Column B to appear in the same cell the formula is in in Column J

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved