I have a named range "Lines" (created using OFFSET fuction) in my worksheet. This named range is dynamic as it is created using OFFSET function and points to a particular region in column A only (so its just a 1 dim array). The named range works fine (it changes automatically as I change a dropdown list).
What I want is to display the contents of the array using MsgBox separating the contents using a newline character.
So suppose if the named range "Lines" points to A1:A4 and the contents of it are A1=A, A2=B, A3=C and A4=C, Then I want a VBA code to show:
A
B
C
D
I want to use a msgbox to display the dim range of
r = "G" & endg & ":J" & endg
Should be something like G29:J29
How can I do this?
it's so I can investigate what is going wrong with my pie chart code
Code:
Sub Add_PVVrGChart() Dim co As ChartObject, endg%, i%, r$, sname$, suffix, r$, s$ '~~~ Suffix allows the code to be manipulated more easily with changing the sheet name but keeping the Suffix the same suffix = Array("A", "B", "C", "D", "E", "F", "G", "H") For i = LBound(suffix) To UBound(suffix)
I have a file with 2 tabs that linked 1) Input 2) Spread. The idea is for the user to spread the total number they keyed in the "input" by months. I need a code that will display a msgbox if the sum of the variance column in Spread <> 0, so it can prompt the users that they still have to do the spreads before closing the files. I want the action to happen when they attempt to save or close, just to remind them it's not done yet.
-In cells J6:P11 - Display a MsgBox for the value in J6; Then - Display MsgBox for the value in K6; Then - Display MsgBox for the value in L6 - etc, etc
1. Calculate (perform F9 manual calculation) 2. Display a msgbox (MsgBox "Enter a city or zip code to calculate mileage.", vbExclamation, "Travel Schedule")
Is there an operator that lets you string multiple macros or do they need to be recorded separately and recalled in one macro assigned to the button?
Before executing my code I want to check down a column to make sure there are no entries in it. If there are then I want to display a message and then exit the sub. If all the cells in the range are empty then the code is to be executed. What I have so far is
I want to run a program from my PERSONAL.XLS workbook, however, after a piece of code where I close all the open workbooks different from PERSONAL.XLS, the code stops running.
How can I contour this?
Down is the piece of code used to close the other workbooks and the msgbox I want to show, along with a DialogBox:
For Each W In Workbooks If W.Name ThisWorkbook.Name Then W.Close SaveChanges:=False End If Next W
MsgBox "Abrir apenas a Origem a actualizar, que deverá ser obrigatoriamente do mês corrente ou do anterior", _ vbOKOnly + vbInformation, "Atenção"
Triggering a message box. one of the worksheets in my workbook is called Update Comments - this is a sheet that contains data in the following format (headers)
B7 = Week Number C7 = W/C D7 = Update Due E7 = Updated By G7 = Update Comments
I have a formula in column D (beginning D8 and copied down for the year) as follows:
How can I break this onto 3 lines in Visual Basic Editior to make it more readable:
MsgBox "Only enter data in white cells." & vbNewLine & "Yellow cells contain formulas or dates entered automatically", & vbNewLine & "Do not insert blank rows. Copy row(s) and Insert/Paste" , vbInformation, "Spreadsheet by GJF"
Im using code from website: http://www.contextures.com/xlDataVal11.html
to display a combobox when I double click any cell that contains a validation list in it. I'm not great with VBA so I am having problems finding what each part of the code does. This is causing problems for another bit of code that I use to display a msgbox when certain values are selected from the list.
The MsgBox shows up great when I select an item from the validation list but does not work at all when I select the same item from the double-clicked combo box. It would be great if I could get the MsgBox to work both ways. This is the code that displays the MsgBox when target value is selected from list
Private Sub Worksheet_Change(ByVal Target As Range) Select Case Target.AddressLocal(False, False) Case Is = "B4", "B5", "B6", "B7", "B8", "B9", "B10", "B11", "B12" If Target.Value = "H" Then MsgBox "This is a pop for extra information. Savvy?", vbYesNo, "Yo!" End If End Select End Sub...............
I'm trying to create a dynamic msgbox that will display what data has been updated based on checkbox selections in the userform. I've named my checkboxes as Carey, Keith, and Juliet.
Ideally if only Carey's data has been updated, I'd like the msgbox to say
' Data has been Updated for: - Carey '
If Carey and Keith's data has been updated, I'd like the msgbox to say
'Data has been Updated for: - Carey - Keith '
etc.
MsgBox ("Data has been Updated for:" & vbnewline & _ If CAREY.Value =true then "- Carey" End if & vbnewline & _ If KEITH.Value =true then "- KEITH" End if & vbnewline & _ If JULIET.Value =true then "- Juliet" End if & ")
display workbook not found in Array set without Filepath, As for workbooks found we can use Dir function, but it is not work for workbook not found. The Dir() will return Blank.
I want a macro that if a certain cell on a row in column F on my worksheet is "6" then copy the cell in columns B and H on the same row are to be copied into an array and then when the loop is done, display the copied cells in a msgbox.
Is there a simpler way to do this without fidgeting with an array?
I am trying to figure out how to make a userform to display the contents of a 2-D array which has a variable number of rows. I want the userform to height of the userform to correspond with the number of rows of data to display.
I don't have much experience with userforms, but here's what I was thinking: VBA code which would find the # of rows of data and then adjust the height of the userform and the length of the lable (which the data would go in).
I used a Fuzzy lookup to match the data that was shared between my two tables. I was able to run 3 different Fuzzy attempts to increase my accuracy because the source data had a lot of spelling errors and such.
Now I am at a point where I need to analyze the 3 possible Fuzzy matches. I am kinda stumped on the best route to do this and thought that an approximate match Hlookup would be the best route but I can't seem to get it to work.
Here is a pic of my table:[URL]
I am trying to match the cell outlined in red against the 3 cells outlined in green, when the best suited match is found I need to copy the green cell and the orange adjacent cells to it's left and right (ID# and Similarity). It would be best if the match threshold was in the low 90% range.
My excel (2003) is stuck in array mode - is there any way to get it out of Array Mode and put it back in the letter:number display for formulas/functions? It's doing this in VBA too which is totally killing me.
I would like to display the column header of the row in which a value other than 0 exists in a cell for each instance that value exists in an array spanning 3 columns. So the result cell could be any of the three column headers.
I started the formula in P2 of the GL Detail-2012 tab. (FILE TOO BIG)
I have attached the spreadsheet for reference. All other sheets pull information from the WHITE sheet.
I want the columns for unit price, discount and total to be set to two decimal places but I also don't want it to show anything if the field has a 0 value (so if i only have a few items I don't get lots of o's).
To get the field to not display a 0 if it is empty on the WHITE sheet I have been using "0;-0;;@" which I found on the net. If I use this then it negates the two decimal places.
i have been trying to add msgbox to show that if textbox1 and textbox3 are empty than show "please enter i.d or lockern no but if textbox3 is true than run the code or textbox1 is true than run the code.
I am currently setting up a ID/Password function on my spreadsheet. On the main page is the login boxes and an Ok button. When the Ok button is pressed, I have a formula that checks the user ID and Password and if correct, it types correct. Otherwise it types incorrect. This is using;
In one of my spreadsheets users can see the active period on multiple worksheets All have cell references to the 1st worksheet (cell B5). I would like 2 things:
1. If users change one of the reference cells on the other worksheets I would like a msgbox to appear
2. After clicking the msgbox away I would like the "old" cell contents (the referenece) to be restored.
Hi, Please could someone help with the following code. I have 2 sheets 'sheet 1' and 'sheet 2'(hidden). Sheet 1 has a control button that takes you straight to sheet 2, however what I wish to achieve is that before sheet 2 is visible a message box appears if a condition is not met. Something like, if sheet 1 R29 is less than 5000 then msg box appears (I would need about 4 lines in the msg box), if ok'd then sheet 2 appears. If the condition is met i.e sheet 1 R29 = or is greater than 5000 then the msg box does not appear and takes the user to sheet 2.
Is it possible to modify and code not to have the OK button. I need to to be information process only. I have a long macro i need to user to be aware where in the macro run we are. I wanted to use this code... but i do not want to click the OK button i need it to just show that that step is completed etc...
