Code to have a button perform two macros?
I need the button to
1. Calculate (perform F9 manual calculation)
2. Display a msgbox (MsgBox "Enter a city or zip code to calculate mileage.", vbExclamation, "Travel Schedule")
Is there an operator that lets you string multiple macros or do they need to be recorded separately and recalled in one macro assigned to the button?
I have a userform with a command button which fires a macro.
everything works fine so far.
my problem is:
I would like to add a msgbox at the end of the macro which confirmes "successfully completed".
I cannnot simply add the msgbox at the end of the macro. don't know what I'm doing wrong.
(see below)
Private Sub CommandButtonOK_Click().
If Me.OptionButton1.Value = True Then
ThisWorkbook.Worksheets("PropertyWorksheet").Range("A1").Value = "Government Securities"
ElseIf Me.OptionButton2.Value = True Then
ThisWorkbook.Worksheets("PropertyWorksheet").Range("A1").Value = "Corporate Bonds"
[Code].....
Unload Me
Application.ScreenUpdating = False
Sheets("MySheet1").Select
Application.ScreenUpdating = False
'run macro
MyMacro1 (adds, hides and deletes various sheets)
MyMacro2
[Code]....
I want to run a program from my PERSONAL.XLS workbook, however, after a piece of code
where I close all the open workbooks different from PERSONAL.XLS, the code stops running.
How can I contour this?
Down is the piece of code used to close the other workbooks and the msgbox I want to show, along with a DialogBox:
For Each W In Workbooks
If W.Name ThisWorkbook.Name Then
W.Close SaveChanges:=False
End If
Next W
MsgBox "Abrir apenas a Origem a actualizar, que deverá ser obrigatoriamente do mês corrente ou do anterior", _
vbOKOnly + vbInformation, "Atenção"
Application.Dialogs(xlDialogOpen).Show
I want to use a msgbox to display the dim range of
r = "G" & endg & ":J" & endg
Should be something like G29:J29
How can I do this?
it's so I can investigate what is going wrong with my pie chart code
Code:
Sub Add_PVVrGChart()
Dim co As ChartObject, endg%, i%, r$, sname$, suffix, r$, s$
'~~~ Suffix allows the code to be manipulated more easily with changing the sheet name but keeping the Suffix the same
suffix = Array("A", "B", "C", "D", "E", "F", "G", "H")
For i = LBound(suffix) To UBound(suffix)
[Code]...
I have a named range "Lines" (created using OFFSET fuction) in my worksheet. This named range is dynamic as it is created using OFFSET function and points to a particular region in column A only (so its just a 1 dim array). The named range works fine (it changes automatically as I change a dropdown list).
What I want is to display the contents of the array using MsgBox separating the contents using a newline character.
So suppose if the named range "Lines" points to A1:A4 and the contents of it are A1=A, A2=B, A3=C and A4=C, Then I want a VBA code to show:
A
B
C
D
I have tried codes like below, but got errors:
MsgBox Join(Lines, ", "), 0, "Debug"
I have a file with 2 tabs that linked 1) Input 2) Spread. The idea is for the user to spread the total number they keyed in the "input" by months. I need a code that will display a msgbox if the sum of the variance column in Spread <> 0, so it can prompt the users that they still have to do the spreads before closing the files.
I want the action to happen when they attempt to save or close, just to remind them it's not done yet.
I am trying to display the row & column number in a MsgBox. Therefore, my MsgBox should display something like: MsgBox "Apple is in cell A1"
View 5 Replies View Related-In cells J6:P11
- Display a MsgBox for the value in J6; Then
- Display MsgBox for the value in K6; Then
- Display MsgBox for the value in L6
- etc, etc
After I use a script, as follows (data must be present in C1) to continue, how do I display a message box "SUCCESS" after an successful save.
Sub SaveAsCell()
Dim strName As String, SaveAsFileName As String
strName = Sheet1. Range("C1")
If strName <> "" Then
If Right(strName, 4) <> ".xls" Then strName = strName & ".xls"
SaveAsFileName = Application.GetSaveAsFilename(InitialFileName:=strName, FileFilter:="(*.xls), *.xls") ..............
Before executing my code I want to check down a column to make sure there are no entries in it. If there are then I want to display a message and then exit the sub. If all the cells in the range are empty then the code is to be executed.
What I have so far is
Triggering a message box. one of the worksheets in my workbook is called Update Comments - this is a sheet that contains data in the following format (headers)
B7 = Week Number
C7 = W/C
D7 = Update Due
E7 = Updated By
G7 = Update Comments
I have a formula in column D (beginning D8 and copied down for the year) as follows:
=IF(AND(C8
How can I break this onto 3 lines in Visual Basic Editior to make it more readable:
MsgBox "Only enter data in white cells." & vbNewLine & "Yellow cells contain formulas or dates entered automatically", &
vbNewLine & "Do not insert blank rows. Copy row(s) and Insert/Paste" , vbInformation, "Spreadsheet by GJF"
Im using code from website: http://www.contextures.com/xlDataVal11.html
to display a combobox when I double click any cell that contains a validation list in it. I'm not great with VBA so I am having problems finding what each part of the code does. This is causing problems for another bit of code that I use to display a msgbox when certain values are selected from the list.
The MsgBox shows up great when I select an item from the validation list but does not work at all when I select the same item from the double-clicked combo box. It would be great if I could get the MsgBox to work both ways. This is the code that displays the MsgBox when target value is selected from list
Private Sub Worksheet_Change(ByVal Target As Range)
Select Case Target.AddressLocal(False, False)
Case Is = "B4", "B5", "B6", "B7", "B8", "B9", "B10", "B11", "B12"
If Target.Value = "H" Then
MsgBox "This is a pop for extra information. Savvy?", vbYesNo, "Yo!"
End If
End Select
End Sub...............
I create a dynamic array. I want to output all the values in my dynamic array in separate rows.
MsgBox ("the values of my dynamic array are: " & vbCr & _
myarray(1) & vbCr & _
myarray(2) & vbCr & _
myarray(3) & vbCr & _
....
myarray(i))
I'm trying to create a dynamic msgbox that will display what data has been updated based on checkbox selections in the userform. I've named my checkboxes as Carey, Keith, and Juliet.
Ideally if only Carey's data has been updated, I'd like the msgbox to say
' Data has been Updated for:
- Carey '
If Carey and Keith's data has been updated, I'd like the msgbox to say
'Data has been Updated for:
- Carey
- Keith '
etc.
MsgBox ("Data has been Updated for:" & vbnewline & _
If CAREY.Value =true then "- Carey" End if & vbnewline & _
If KEITH.Value =true then "- KEITH" End if & vbnewline & _
If JULIET.Value =true then "- Juliet" End if & ")
I have a workbook with two macros that the user can run individually. They unfortunately take a fair amount of time to complete (approx 1 hour each) so I implemented some timing related code that at the end of the macro completion, it notifies them with a msgBox indicating how long it took to run. With that said, I would like to allow the user to run a macro that simply calls the other two so that they can kick it off at the end of the day and they both will be finished by morning. I created a new macro that simply makes a call to each of the other macros individually. The problem is, my msgBox that displays after the first macro completes, waits for "OK" acknowledgement which defeats the whole purpose of being able to run them both via one macro. I have tried to include Application.DisplayAlerts = False prior to calling the first macro but it is not working. Here is an example of what I am trying to do.
Sub runAllMacros()
Application.DisplayAlerts = False
Call compileBookData
Call compileLaborData
Application.DisplayAlerts = True
MsgBox "All Rollup Macros have completed execution."
I have a problem with a time card i am producing. I want to count hours and minutes worked and carry forward any surplus or deficit into the next week. I can do it if the hours do not total more than 24. I have attached the file and it is formatted in 1904 format.
View 2 Replies View Relatedhow to display a percentage in a field in excel.
EG.
If I have a calculated price in cell A and I would like to enter a price manualy in cell B , how would I get excel to display in another cell what perecentage A is of B
price A would would be for example a purchase price , Price B would be a suggested retail price entered manualy and i would want cell C to show me what percentage increase it is of price A
I am a little lost on this, and have tried to remedy my issue by searches to no avail. I have a cell formula that references another cell:
Cell A1 (=A3) where Cell A3 = 1
Cell A1 displays the text "=A3" and not the value of 1. Autocalc is on, and the worsheet and workbook is unprotected.
the below macro choose the row number that is entered into textbox on a userform
frmUnHide
as you probably already know, when you insert function
View 3 Replies View Relatedis there a way to use the functionality of 'MsgBox' but within a function instead of a macro? I use: MsgBox "You must enter a Acquisition Date", vbCritical, "Error Message" now I would like to use it within a funtion.
View 2 Replies View RelatedI have an application (in xl'97) where users enter a date in N4. =TODAY() is in C7 as the date of entry. I need some vba to show a message should C7-N4 be >10d.
View 2 Replies View RelatedHow would I add a YesNo MsgBox to my existing macro that I have set up through a commancd button? I would like the user prompt to ask the following ? ---> "Would you like to move the data sheet forward 1 week?". Then if "Yes" is selected, run the following macro. If "No", end the subroutine.
Private Sub CommandButton6_Click()
Range("M7:BL156").Select
Selection.Copy
Range("L7").Select
ActiveSheet.PasteSpecial Format:=3, Link:=1, DisplayAsIcon:=False, _
IconFileName:=False
Range("I4").Select
ActiveSheet.Range("L6").Value = Range("L6").Value + 7
End Sub
I am writing a macro for people at work to use to automatically vlook-up data from another spreadsheet.
I wanted to base it along the use of a msgbox as they are not the most tech-savy people.
I want the msgbox dialogue to go something like this -
Which spreadsheet do you want to pull in data from?
The user browses to the file they want
Which columns do you want to transfer?
The user types in the columns
Which columns do you want them pasted to (in new sheet)?
The user types in the columns they want to paste to
and then macro does the vlook-up.
The below code works well. However I would like to give the users an option to opt out of running the code when the message box appears.
Code:
Sub delete_sheets()
Beep
MsgBox "This will delete All Sheets but the active sheet"
*****this is where I would like to use an additional message box or include it in the above message box an option for the user to cancel this code****
Range("XA1") = ActiveSheet.Name
ActiveSheet.Name = ("Delete_Sheets")
Dim ws As Worksheet
Application.DisplayAlerts = False
For Each ws In Worksheets
If Not ws.Name = "Delete_Sheets" Then ws.Delete
Next ws
[code]....
Im looking for code for a button that asks for a Record number, and it will delete the record. But the record number is written in cells as 'Record No.1' 'Record No.2' etc. But i want the messagebox to ask for a single number and it would delete that record. Now the position of the records is what will be the difficult bit about this code, but it has a pattern.
For Record No.1 i need deleting cells C2:J100
For Record No.2 i need deleting cells L2:S100
For Record No.3 i need deleting cells U2:AB100
If anyone could give me a bit of code that works for these 3 then i could waste a load of time filling the rest of them out.
I have made a userform where I calculate how long time an operation takes. If the time fe.g. is 25 hours and 24 minutes then I get the result 1:24. I have attached my userform as it looks now. If you write 540 in the bar and 550 in volume and press "Beregn" then "Norm tid + 10%" will write 1:24 and not 25:24. Is it possible to have the Userform to write 25:24 or 1day and 1 hour and 24minutes?
View 2 Replies View RelatedI have a macro which works well. All it does is save a file to a specified location on my network. However, after a file is saved there is no prompt telling the user that the file was saved successfully leaving them wondering whether the macro actually worked.
VB:
Public Sub SaveAs() ThisFile = Range("X2").Value
ActiveWorkbook.SaveAs Filename:="legdcAudits" & ThisFile & ".xlsm", FileFormat:=52
End Sub
I have a UserForm that Dead Head Miles will be entered into one text box. The Trip Miles will be entered into the second text box I would like for the user form to show the answer after the first entries are made something like this:
1)Dead Head Miles 20 +
2) Trip Miles 500
----times---$2.00
3)Projected Rate $1040 --show this after the DH and Trip is entered and Multiplied by $2.00
