Display Image Embedded In A Cell To Userform
Dec 27, 2011Is it possible to display a image embedded in the cell on a userform?
View 1 Replies
ADVERTISEMENT
Display Image From URL In UserForm?
Mar 2, 2014I have a code that generates a URL for an image (on the internet, not on the local machine) and I would like that picture to be displayed within a userform (preferably at it's original resolution).
View 5 Replies View RelatedLinking Image To Cell Value And Display Selected Image In New Sheet?
Mar 18, 2014I need to link an image to a cell value and display the selected image in a new sheet of the same excel. I am attaching samplefile for easy reference. The requirement is, from the workout sheet when I select from drop down list, then the corresponding cell value appears in Parameter sheet in C9 cell.
There are four images copied in Parameter excel. The given image has to be selected and linked to the C9 cell value. Based on the selection that particular image should be shown on Sample Picture sheet. Here based on the selection only the image should reflect here.
Display Image Based On Image Name In Cell
Sep 4, 2007Is there a way to have image box display an image with a name matching data from a cell? example: if I type "hello" in cell a1, Image box will load image named "hello". And display new images by changing the name in cell a1. Note: the images will be located in a permanent folder.
View 3 Replies View RelatedDisplay Image In Cell
Jan 22, 2008I am trying to add a feature to an excel spreadsheet that will display image files (map files, .emf if possible), whenever its respective cell is clicked. I have a reasonable amount of experience with macros, although it was purely in excel which completely limits my vba skills. I could probably figure something out if I spent a few weeks on it and then it would probably be like 90 mb and slow.
View 2 Replies View RelatedDisplay An Image Based On A Cell's Value?
Jan 12, 2010I have two bitmap images, and I would like to show only one image at a time, based on the content of another cell's pull-down list. If the user selects "AIR", then display the AIR image. If the user selects "SERVO", then display the SERVO image.
View 2 Replies View RelatedHow To Display The Image Of Hyperlink In Cell
Dec 8, 2013Is there a way to display the image of a hyperlink in a cell?
View 5 Replies View RelatedDisplay Image Based On Contents Of Cell?
Feb 25, 2014I have found Displaying an image based on text contained within a cell. which appears to be a very similar question, but no steps to follow.
Basically I have a folder with around 300 images in it, each is called ProductId number.jpg
eg Z99S1234567.jpg
In my sheet I am using the same ProductId number and would like to display the product image on the sheet. I have A1:D19 as spare space Lookig at the info I have found the image will have to go into a cell, so can I break all the rules and merge cells to fit the image in, or do I need to make a single cell big enough or can I use VBA to import the image somehow to a specific place on the sheet.
There will only ever be one looked up image on the screen at a time.
Display Image Based On Cell Content
Aug 17, 2007I'm trying to display a different image based on the contents of a cell. For example if cell A1 = "Gerrard" I would then like to display a picture of Steven Gerarrd. Is this possible? If so can anyone give me a steer in how I might acheive this.
View 3 Replies View RelatedExcel 2007 :: Display And Hide Image On Sheet On Mouse Hover On Cell?
Oct 6, 2013In excel 2007, I have an embedded image on a sheet which I want to make it hidden by default. When someone hovers over a particular cell say cell B3, then image should be displayed below this cell (sort of hyperlinking) and when the cursor or activell cell is not in B3 it should be hidden again. What steps/technique/VBA code will make it happen ?
View 3 Replies View RelatedVBA Display Image
Mar 27, 2009I'm trying to writ a small user form with a text box, buttom and image container. The idea is when I type a sign number and click the button the form add the sign number to the address path of the folder containing the images and set the image containers picture to the corisponding file .. this is what I've done so far but I cant get it to work -
View 2 Replies View RelatedDisplay A Web Image Using VBA
Apr 3, 2008I am using a macro to display an above 255 character image:
Sub Test()
Dim URL As String
URL = Worksheets("Sheet1").Range("B4").Value
ActiveWorkbook.FollowHyperlink URL
End Sub
Is there any way of opening this in a specific part of the spreadsheet (say aligning with C5) rather than a separate web browser?
Display Image As Thumbnail
Mar 7, 2008Is there a way to insert a reference image thumbnail into my worksheet? I've tried inserting images/pictures directly, however these are duplicate copies of the originals from my system folder. C:/my documents/my pictures. I have about a hundred small images in this folder which are continually updated. (ie: the image changes) I would need this update to be reflected in excel as well.
View 3 Replies View RelatedHow To Automatically Identify Image Name And Place In Cell Next To Image
Jan 22, 2014I am looking for a way to take the picture name associated with an image ie: (picture 571) and place that picture name in the cell next to the image.
I can see the picture name - it registers in the top left box that usually indicates the cell the cursor is on... and I could manually type that name next to each image.
However my spreadsheet has several thousand rows- each with several columns of information and an image..
I am looking for a way "formula?" to automatically read the image in cell J4 and populate cell K4 with the image name... and so on.
The reason for my request... is I am importing products into a web based shopping cart... to do so I have to export the products to a csv and import that csv into the shopping cart. The process of exporting to a csv- strips away all the images and leaves just data.
I found that I can save the document as an html and that process creates a folder with all the images- saved as (picture 571.jpg) if the resulting csv had the image name... the shopping cart would then look for that image name in my image file and it would populate into the shopping cart appropriately.
This seemed on it's face like a really simple thing to do, I have plenty experience with excel & I thought I'd be able to make cell k4= j4 and tada it would glean the image name & I could simply copy that formula all the way down the sheet & it would be done... but I just cant find the magic button that freely gives up the image name...
Excel 2010 :: Possible To Display Thumbnail Of Image
Mar 20, 2012Is it possible to have a thumbnail of an image display in Excel 2010 and when you click on the thumbnail, it is viewed in its normal size?
View 2 Replies View RelatedHow To Display A Gif File In A Dialog Box Using An Image Control
Jan 11, 2010my code brings up an empty dialog box.
The file I am trying to view is saved as follows: C: Test.gif
What I have done.Added a image control to a dialog box, called image1
Added the following event handler to image1:
x = c: test.gif
Image1.picture = loadpicture (X)Pressed F5 to test the code and brings up a dialog box with a blank image box.
Not called the userform in the main module (didn't seem much point considering the test failed)
My questions
where I am going wrong with this, the correct code?
Also in inputting the address of the file I could not use the C: format as this brought up an error. What is the correct format?
Display Userform Based On Cell Value
Sep 12, 2012Depending on the result of a formula in R67, one of three things will occur. If the result is a 1, UserForm1 is displayed. If the result is a 2, UserForm2 is displayed. If it is nothing, nothing happens. Ok, I can do that.
However, with the code below, whenever I select any cell, and there is a 1 or a 2 in R67, the userform pops up. I only want it to pop up if I change a value in C6 which in turn changes the result of the formula in R67.
Code:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Range("R67").Value = 1 Then
Run "UserForm1"
End If
If Range("R67").Value = 2 Then
Run "Userform2"
[Code] .......
I've tried setting a monitored range. I've tried the code below in one form or another and it didn't work.
Code:
If Not Intersect(Target, Range("C6, R67")) Is Nothing Then Macro
Embed Image In Cell :: HTTPS URL To An Image
Aug 8, 2006I have a dataset that includes the path and optionally an HTTPS URL to an image. Is it possible to embed this image in a cell?
Short of that what might be some other options?
Error When Trying To Display Cell Value In Userform Textbox
Jul 25, 2014I have two sheets. sheet2 is a lookup table. sheet1 is information sheet. i have created a userform where a user inputs data into 3 textboxes and clicks a button. i have the code for transferring the data from the textboxes into row after the last used row on sheet1, columns a,b,c. in columns d and e i have vlookup code that takes the value in column c and performs the lookup function to return values found in sheet2. this all works fine.
I am trying to display the vlookup results in a 4th textbox on my userform.
If I use this code:
[Code] ......
I receive a type mismatch error
if i use THIS code:
[Code] ..........
if works fine!?! what gives?
Concatenate Cell Values & Display On Userform
Sep 24, 2007is there a way that i can insert cell values in a userform
i have data which needs to be displayed on 33 lines
line 1 cell value from d10 then space cell value from d185 then space cell value from d186
this needs to be repeated
line 2 cell value from e10 then space cell value from e185 then space cell value from e186
line 3 cell value from f10 then space cell value from f185 then space cell value from f186
line 4 cell value from g10 then space cell value from g185 then space cell value from g186
this continues trough to line 33
Userform - Multiple List Box And Display In Cell Of Spreadsheet?
Jul 14, 2013I have designed a multiple list box on my userform and display it on one of the cells in the spreadsheet but with each list item separated by a comma when its display on excel.
The problem with my code is the delimiter appears at the first list item, but it should only appear if more than one list item is chosen.
|Apple|Orange
I was thinking if there is something like if gItem = 0 then only display sFruits Else display what I have below???
VB:
For gItem = 0 To FruitsList.ListCount - 1
If FruitsList.Selected(gItem) = True Then
sFruits = sFruits & delimiter4 & FruitsList.List(gItem)
End If
Next
.Cells(gRow, "AO").Value = sFruits
Double Click Merged Cell To Display Userform -
Apr 7, 2009following on from previous post (http://www.excelforum.com/excel-prog...g-up-form.html) what if the selected cell is a merged cell (cell count is greateer than 1), what is the best solution to enable double click event on merged cell ?
View 2 Replies View RelatedAdd Webserver Image To Userform
Aug 27, 2012I am trying to pull a product image from our webserver based on the product ID but get a Path/File Access Error
Code:
ImageID = Application.VLookup _
(TextBox3, Range("ItemList"), 10, False)
ImagePath = http://images.ourserver.com/imgen/ & ImageID & ".jpg"
imgProdID.Picture = LoadPicture(ImagePath)
I am looking to see if it is in the mapped drive anywhere but in case its not?
VBA Userform Image Control
Jan 13, 2014I have a userform with multiple images
I would like to set all images to visible = false when images are dynamically named.
E.g. image names:
Image73om3
Image4y45h
Image12AB2
Is there a way to say
Code:
With all images
visible = false
End With
or
Code:
image*.visible = false
Use Image From Library On Userform
Jun 12, 2008Is it possible to use a VB library image and add it to a UserForm? i.e. I would like to use the vbInformation image used in a Msgbox.
View 4 Replies View RelatedRotate Image On Userform
Aug 13, 2008I am rotating an image on a userform by uploading different gif images to simulate the rotation. There is an annoying screen flicker around the image when changing images that I would like to get rid of if possible. how to get rid of the flicker or a different technique I could use to rotate an image? 1st attempt - uploading different pictures
For h = 1 To Sheets("Bar Contents"). Range("B" & ItemRow) Step 1
PictureLocation = ThisWorkbook.Path & "PicturesTransparent" & Sheets("Bar Contents").Range("C" & ItemRow) _
& " " & h & ".gif"
GameUserForm.DrinkAnimation.Picture = LoadPicture(PictureLocation)
Sleep 50
DoEvents
Next h.........................
Generic Sub For Image Control In Userform?
Aug 9, 2014My final version will have more than 40 images with all the same code: they will all increment a corresponding SpinButton with 1.
[Code]....
Insert Image On Userform - ICO File
Mar 26, 2014I want to insert image on my userform, but I have problems with It. Image is originally .png and has no background, which is what I need.
Excel doesn't allow me to use .png, so I had to convert It to .jpg, but then background is included. Even that would be o.k., If I could somehow change picture background to "&H8000000F&" system colour, but failed to do that also.
So I tried with converting file to .ico, and again Excel recognizes It as invalid picture.
I just want to insert image, and leave background same colour as Userform.
Faking An Animated Image In A Userform
Jul 22, 2008in a userform in Excel. As you might have guessed, I've created a macro that, depending on user inputs, can take a bit of time to run, and I want to display something to let the user know that Excel hasn't locked up. Ideally, this would be a sort of faux status bar like the one above that implies that there is work being done without necessarily actually indicating the amount of work completed (I figure that would be easier to code).
Do you have any recommendations about how to accomplish something like this? Ideally also I'd like to not have to download anything in order to make this work, as the spreadsheet is designed for others to use, so it would be inconvenient if they had to install an add-in or similar to get it to run.
Allow Drag & Drop For UserForm Image
Nov 1, 2006I am looking to if there is anyway to move an image box using a mouse drag and drop action. I have put together a little example of what I am trying to work with and was wondering if anyone on here had any tricks to make this work.
I realise the drag and drop method only applies to the textbox and listbox but have seen some old code that can simulate the drag and drop by creating a border of some sort to illustrate where the image box is going to be placed and final just setting the properties of that image box to where the border is placed.
In the example type in a size in the width and height textboxs (I used 3000,3000) and then what I want to do from there is move the white box using the mouse within the blue box.