I have two bitmap images, and I would like to show only one image at a time, based on the content of another cell's pull-down list. If the user selects "AIR", then display the AIR image. If the user selects "SERVO", then display the SERVO image.
View 2 RepliesIs there a way to have image box display an image with a name matching data from a cell? example: if I type "hello" in cell a1, Image box will load image named "hello". And display new images by changing the name in cell a1. Note: the images will be located in a permanent folder.
View 3 Replies View RelatedI have found Displaying an image based on text contained within a cell. which appears to be a very similar question, but no steps to follow.
Basically I have a folder with around 300 images in it, each is called ProductId number.jpg
eg Z99S1234567.jpg
In my sheet I am using the same ProductId number and would like to display the product image on the sheet. I have A1:D19 as spare space Lookig at the info I have found the image will have to go into a cell, so can I break all the rules and merge cells to fit the image in, or do I need to make a single cell big enough or can I use VBA to import the image somehow to a specific place on the sheet.
There will only ever be one looked up image on the screen at a time.
I'm trying to display a different image based on the contents of a cell. For example if cell A1 = "Gerrard" I would then like to display a picture of Steven Gerarrd. Is this possible? If so can anyone give me a steer in how I might acheive this.
View 3 Replies View RelatedI need to link an image to a cell value and display the selected image in a new sheet of the same excel. I am attaching samplefile for easy reference. The requirement is, from the workout sheet when I select from drop down list, then the corresponding cell value appears in Parameter sheet in C9 cell.
There are four images copied in Parameter excel. The given image has to be selected and linked to the C9 cell value. Based on the selection that particular image should be shown on Sample Picture sheet. Here based on the selection only the image should reflect here.
I am trying to add a feature to an excel spreadsheet that will display image files (map files, .emf if possible), whenever its respective cell is clicked. I have a reasonable amount of experience with macros, although it was purely in excel which completely limits my vba skills. I could probably figure something out if I spent a few weeks on it and then it would probably be like 90 mb and slow.
View 2 Replies View RelatedIs there a way to display the image of a hyperlink in a cell?
View 5 Replies View RelatedIs it possible to display a image embedded in the cell on a userform?
View 1 Replies View RelatedIn excel 2007, I have an embedded image on a sheet which I want to make it hidden by default. When someone hovers over a particular cell say cell B3, then image should be displayed below this cell (sort of hyperlinking) and when the cursor or activell cell is not in B3 it should be hidden again. What steps/technique/VBA code will make it happen ?
View 3 Replies View RelatedRunning a macro that would insert product images in to a sheet based on a SKU that is in a different column. My sheet has an image in Cell A3 based on the SKU code that is inputted in to D3. All of my images are stored in F:Images I will have about 500 SKU's that all need images and will be named the same as the SKU I enter in to Column D.
Can this be done via a VBA script?
Step1: Type the picture name that is store somewhere in the computer (C:/MyDocument/Pics)
Step2: After typing the pic name into the cell, the pic that is the same name as the cell text will be display (Type "apple" and the other cell load out the apple pic that is stored)
How do I load an image based on the cellref value already in the sheet? I have pictures in a worksheet labelled picture 1,picture 2. If Cell A1 = 1 I want it have picture 1 loaded in that cell. if cell a2 = 2 load picture 2 in that cell. also if changes to =2 replace picture1 in a1 with picture2.
View 2 Replies View RelatedQuestion: I would like to have two pictures (one in cell B2, the other in cells D1-C10 to I10) display based on a data validation list that I have in A1. So, for example, if you click U.S.A., two pictures for U.S.A. show up; if you scroll down to Canada, two pictures show up. If you're interested, I have included the history of what I have tried in the past.
History of what I have tried:
I used this code before [url] , but that makes all pictures but 1 invisible and I need two.
So then I used this one,
Sub HelloWorld()
'Message box to say hello
MsgBox " Sub GetPicture()
Dim oPic As Picture, imgFlag As Range, imgMap As Range
' Loop Flag and Map images
'imgFlag = Worksheets("Image").Range("B1")
'imgMap = Worksheets("Image").Range("D1")
For Each oPic In Worksheets("Summary").Pictures
If (oPic.Name = Worksheets("Image").Range("B1").Text) Then
oPic.Visible = True
oPic.Top = Worksheets("Image").Range("B1").Top
oPic.Left = Worksheets("Image").Range("B1").Left
ElseIf (oPic.Name = Worksheets("Image").Range("D1").Text) Then
oPic.Visible = True
oPic.Top = Worksheets("Image").Range("D1").Top
oPic.Left = Worksheets("Image").Range("D1").Left
Else
oPic.Visible = False
End If
Next oPic
End Sub"
I'm trying to writ a small user form with a text box, buttom and image container. The idea is when I type a sign number and click the button the form add the sign number to the address path of the folder containing the images and set the image containers picture to the corisponding file .. this is what I've done so far but I cant get it to work -
View 2 Replies View RelatedI am using a macro to display an above 255 character image:
Sub Test()
Dim URL As String
URL = Worksheets("Sheet1").Range("B4").Value
ActiveWorkbook.FollowHyperlink URL
End Sub
Is there any way of opening this in a specific part of the spreadsheet (say aligning with C5) rather than a separate web browser?
I have a spreadsheet with two bitmap images inserted into it. In cell E2, I will enter a number, either a 1 or a 2. if I enter a 1, I want only the first image to be visible. If I enter a 2, I only want the second image to be visible. Is there a way to accomplish this (hopefully without the need for macros)? I've attached a spreadsheet as an example of what I'm trying to do. Also, note that I'd like the images to be stacked on top of each other so that they show up in the same place regardless of wether there's a 1 or a 2 in cell E5
View 13 Replies View RelatedI have a code that generates a URL for an image (on the internet, not on the local machine) and I would like that picture to be displayed within a userform (preferably at it's original resolution).
View 5 Replies View RelatedIs there a way to insert a reference image thumbnail into my worksheet? I've tried inserting images/pictures directly, however these are duplicate copies of the originals from my system folder. C:/my documents/my pictures. I have about a hundred small images in this folder which are continually updated. (ie: the image changes) I would need this update to be reflected in excel as well.
View 3 Replies View RelatedPosted this on another forum. [URL] .....
View 1 Replies View RelatedI'm looking for vba code to use that will incrementally rotate an image based on values entered within a cell of an Excel spreadsheet.
I have two graphics, one is the face of a dial and the other is the pointer very much like a speedometer. I can achieve the desired outcome using two excel charts, one overlaid on top of the other, but, this doesn't give me the visual effect I'm looking for.
I'm using the face of the semicircle dial as the background image and I have a separate image for the pointer. When a value between 1 and 100 is entered in cell O3 i would like the pointer to rotate to that position on the dial. The pointer is to have a fixed position and arc left to right where the value of 1 is left-most and horizontally aligned, and for the value 100 the pointer would point in the opposite direction.
Is it possible to put image in comment base on the value in cell ?
For example
c1 c2 c3
R1 A
R2 B
R3 C
I can put A.jpg to C1R1"A", B.jpg to C2R2 "B", and C.jpg to C3R3
Or irregular arrangement ??
I'm looking for a way to rename an object (which is an image) based cell values. Not to sure where to start.
View 4 Replies View RelatedI am looking for a way to take the picture name associated with an image ie: (picture 571) and place that picture name in the cell next to the image.
I can see the picture name - it registers in the top left box that usually indicates the cell the cursor is on... and I could manually type that name next to each image.
However my spreadsheet has several thousand rows- each with several columns of information and an image..
I am looking for a way "formula?" to automatically read the image in cell J4 and populate cell K4 with the image name... and so on.
The reason for my request... is I am importing products into a web based shopping cart... to do so I have to export the products to a csv and import that csv into the shopping cart. The process of exporting to a csv- strips away all the images and leaves just data.
I found that I can save the document as an html and that process creates a folder with all the images- saved as (picture 571.jpg) if the resulting csv had the image name... the shopping cart would then look for that image name in my image file and it would populate into the shopping cart appropriately.
This seemed on it's face like a really simple thing to do, I have plenty experience with excel & I thought I'd be able to make cell k4= j4 and tada it would glean the image name & I could simply copy that formula all the way down the sheet & it would be done... but I just cant find the magic button that freely gives up the image name...
Is it possible to have a thumbnail of an image display in Excel 2010 and when you click on the thumbnail, it is viewed in its normal size?
View 2 Replies View Relatedmy code brings up an empty dialog box.
The file I am trying to view is saved as follows: C: Test.gif
What I have done.Added a image control to a dialog box, called image1
Added the following event handler to image1:
x = c: test.gif
Image1.picture = loadpicture (X)Pressed F5 to test the code and brings up a dialog box with a blank image box.
Not called the userform in the main module (didn't seem much point considering the test failed)
My questions
where I am going wrong with this, the correct code?
Also in inputting the address of the file I could not use the C: format as this brought up an error. What is the correct format?
I have a dataset that includes the path and optionally an HTTPS URL to an image. Is it possible to embed this image in a cell?
Short of that what might be some other options?
Programming Excel VBA Macro to do OCR (text recognition) from a prt scr screen capture image and input the text into cells. Currently my Excel file has a push-button, and upon clicking on it the macro pastes into Excel the current clipboard image I have created by pressing prt scr while in another program. The macro then crops the image to the region with the applicable text. I have to then manually type the text I see in image format into the appropriate cells.
the VBA coding to automate this? I'd like it to use the clipboard image and run it through OneNote OCR, after which the applicable text values are automatically entered into the cells. Ideally the code will first crop to the region with the desired text before it does OCR. If this is not feasible, it will need to incorporate a method (keyword search?) to hone in on the desired text after the entire prt scr image has been OCRed.
I need to display a set of cells based on the value of two drop down cells i have. As I am not very good at english and worse at explinations, I'll try via screen shots...
I have two dropdowns (C4 and C6) that will indicate what table to use (Second sheet / screenshot). I want that "table" to display in the yellow box on the first page. To complicate matters, some options do not have a CLA option - those starting with X. As there are 24 different outcomes and each is 3x9 if/then statements just dont seem to cut it.
P.S. I have excel 2010 and windows 7
Depending on the result of a formula in R67, one of three things will occur. If the result is a 1, UserForm1 is displayed. If the result is a 2, UserForm2 is displayed. If it is nothing, nothing happens. Ok, I can do that.
However, with the code below, whenever I select any cell, and there is a 1 or a 2 in R67, the userform pops up. I only want it to pop up if I change a value in C6 which in turn changes the result of the formula in R67.
Code:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Range("R67").Value = 1 Then
Run "UserForm1"
End If
If Range("R67").Value = 2 Then
Run "Userform2"
[Code] .......
I've tried setting a monitored range. I've tried the code below in one form or another and it didn't work.
Code:
If Not Intersect(Target, Range("C6, R67")) Is Nothing Then Macro
I have a workbook that can open a URL into IE when a project number is entered in an input box.
What I would like to happen is that if the project number entered does not have a URL against it and the value is #N/A, then the message box will display "Project does not exist". However if the number does exist, I want a different message box to be displayed which is a yes/no box.
The code below is what I have tried which works fine if the cell value is #N/A but when it is not it throws an Run-Time error 13: Type mismatch
Code:
Sub SearchPidsMessageBox()
Dim Answer As String
Dim MyNote As String
[Code]....