Depending on the result of a formula in R67, one of three things will occur. If the result is a 1, UserForm1 is displayed. If the result is a 2, UserForm2 is displayed. If it is nothing, nothing happens. Ok, I can do that.
However, with the code below, whenever I select any cell, and there is a 1 or a 2 in R67, the userform pops up. I only want it to pop up if I change a value in C6 which in turn changes the result of the formula in R67.
Code:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Range("R67").Value = 1 Then
Run "UserForm1"
End If
If Range("R67").Value = 2 Then
Run "Userform2"
[Code] .......
I've tried setting a monitored range. I've tried the code below in one form or another and it didn't work.
Code:
If Not Intersect(Target, Range("C6, R67")) Is Nothing Then Macro
I have created a User Form that has been tested and is working properly. Now my last step is to do the following:
I would like to Display the User Form (coded as CommRM) if in Column C (can be any cell as it is a large worksheet) someone selects "Retail News" from the drop down option.
The code that I have been able to create so far is below. The problem is that when I select Retail News from a drop down in Column C the user form does not appear.
VB:
Private Sub Worksheet_SelectionChange(ByVal Target As Range) If Range (C14, C3333).Text = "Retail News" Then Call UserForm_Initialize End Sub Private Sub UserForm_Initialize() Load CommRM CommRM.Show End Sub
I have two sheets. sheet2 is a lookup table. sheet1 is information sheet. i have created a userform where a user inputs data into 3 textboxes and clicks a button. i have the code for transferring the data from the textboxes into row after the last used row on sheet1, columns a,b,c. in columns d and e i have vlookup code that takes the value in column c and performs the lookup function to return values found in sheet2. this all works fine.
I am trying to display the vlookup results in a 4th textbox on my userform.
is there a way that i can insert cell values in a userform i have data which needs to be displayed on 33 lines line 1 cell value from d10 then space cell value from d185 then space cell value from d186 this needs to be repeated line 2 cell value from e10 then space cell value from e185 then space cell value from e186 line 3 cell value from f10 then space cell value from f185 then space cell value from f186 line 4 cell value from g10 then space cell value from g185 then space cell value from g186 this continues trough to line 33
I have designed a multiple list box on my userform and display it on one of the cells in the spreadsheet but with each list item separated by a comma when its display on excel.
The problem with my code is the delimiter appears at the first list item, but it should only appear if more than one list item is chosen.
|Apple|Orange
I was thinking if there is something like if gItem = 0 then only display sFruits Else display what I have below???
VB: For gItem = 0 To FruitsList.ListCount - 1 If FruitsList.Selected(gItem) = True Then sFruits = sFruits & delimiter4 & FruitsList.List(gItem) End If Next .Cells(gRow, "AO").Value = sFruits
following on from previous post (http://www.excelforum.com/excel-prog...g-up-form.html) what if the selected cell is a merged cell (cell count is greateer than 1), what is the best solution to enable double click event on merged cell ?
I need to display a set of cells based on the value of two drop down cells i have. As I am not very good at english and worse at explinations, I'll try via screen shots...
I have two dropdowns (C4 and C6) that will indicate what table to use (Second sheet / screenshot). I want that "table" to display in the yellow box on the first page. To complicate matters, some options do not have a CLA option - those starting with X. As there are 24 different outcomes and each is 3x9 if/then statements just dont seem to cut it.
I have two bitmap images, and I would like to show only one image at a time, based on the content of another cell's pull-down list. If the user selects "AIR", then display the AIR image. If the user selects "SERVO", then display the SERVO image.
I have a workbook that can open a URL into IE when a project number is entered in an input box.
What I would like to happen is that if the project number entered does not have a URL against it and the value is #N/A, then the message box will display "Project does not exist". However if the number does exist, I want a different message box to be displayed which is a yes/no box.
The code below is what I have tried which works fine if the cell value is #N/A but when it is not it throws an Run-Time error 13: Type mismatch
Code: Sub SearchPidsMessageBox() Dim Answer As String Dim MyNote As String
I am trying to create a table, based on what people predict in sports games. I have most of it in place, but I have hit a brick wall where one part of it is concerned. For example, cells M43:M56 have the scores for each week of what one person predicted., so it could be 2,5,7,2 and so on. What I then need the table to do is determine which round or week it is and display the relevant score. So based on the above let's say it's round 3, and his score would be 7 for the week, and the cell to the right of this shows the week's score plus his total score so far.
I have a map of the US composed of 50 shapes (one for each state). I need each shape to appear or disappear based on a value in a corresponding cell. I can't use VBA for this as it needs to function for users in a high-security Excel 2003 which doesn't allow macros.
I have found Displaying an image based on text contained within a cell. which appears to be a very similar question, but no steps to follow.
Basically I have a folder with around 300 images in it, each is called ProductId number.jpg eg Z99S1234567.jpg
In my sheet I am using the same ProductId number and would like to display the product image on the sheet. I have A1:D19 as spare space Lookig at the info I have found the image will have to go into a cell, so can I break all the rules and merge cells to fit the image in, or do I need to make a single cell big enough or can I use VBA to import the image somehow to a specific place on the sheet.
There will only ever be one looked up image on the screen at a time.
I'm trying to display a different image based on the contents of a cell. For example if cell A1 = "Gerrard" I would then like to display a picture of Steven Gerarrd. Is this possible? If so can anyone give me a steer in how I might acheive this.
Is It Possible To Embed Pictures So That When I Do Lookup A Code It Then Shows Me The Picture Of What It Is Im Looking For. Ie If I Was To Type In Kettle It Would Show Me A Picture Of A Kettle In The Next Cell?
I wonder if the following is possible in the worksheet_open event. I want to be able to open my worksheet and see via a message box all the important features I need to look at.
Using column AG, Take the cells that are conditionally formatted to red, take the corresponding cells in column A & B and output this information in a message box.
I am trying to create a formula which will allow me to type a word in a cell on the Main sheet, and then pull any row from multiple sheets and display them on the Main sheet. For example, my sheet named Main looks like this:
A B C D E 1 Query: 2 Fruit Store Cost Mode Date
And there's a sheet for each month with the same format and different data: A B C D E 1 Fruit Store Cost Mode Date 2 Apple Dominicks 1.99 Bagged 3/16/2014 3 Apple Piggly Wiggly 2.19 Ala Carte 3/14/2014 4 Banana Jewel 0.49 Bagged 3/1/2014 5 Banana Dominicks 0.57 Ala Carte 3/16/2014 6 Banana Costco 0.69 Ala Carte 3/16/2014 7 Cantaloupe Jewel 2.99 Ala Carte 3/14/2014 8 Cantaloupe Dominicks 1.99 Ala Carte 3/1/2014 9 Eggplant Jewel 0.99 Ala Carte 3/30/2014 10 Eggplant Dominicks 1.19 Ala Carte 3/30/2014 11 Eggplant Costco 1.29 Ala Carte 3/21/2014 12 Eggplant Safeway 0.79 Ala Carte 3/16/2014 13 Pears Jewel 1.19 Ala Carte 3/14/2014 14 Pears Dominicks 1.59 Bagged 3/1/2014 15 Pears Piggly Wiggly 0.99 Ala Carte 3/30/2014 16 Rhubarb Jewel 0.99 Ala Carte 3/14/2014 17 Rhubarb Piggly Wiggly 0.59 Ala Carte 3/14/2014 18 Rhubarb Costco 0.89 Ala Carte 3/14/2014 19 Tomatoes Jewel 1.99 Ala Carte 3/1/2014 20 Tomatoes Safeway 1.69 Bagged 3/30/2014 21 Tomatoes Dominicks 1.89 Carton 3/27/2014
... and so on. On my main sheet in Cell B1, I want to type a fruit name, such as Banana, and have every row in every sheet with Banana in column A,pulled and displayed on the Main sheet. Firstly, is this even possible with a macro?
I have some dynamic named ranges in sheet1, and in sheet2 I have data validation dropdown list which has the names of all the DNR's in it.
What I want it to do (in sheet3, no less) is for the user to be able to pick a named range from the dropdown list, and have a particular column in sheet3 then display that entire named range.
I have made a 'data' worksheet which is the source for the data validation in sheet2. Each item in the list identically matches the name of each of the named ranges. I was hoping to be able to use some form of =INDIRECT but alas, no such luck.
So it's almost like a copy and paste function I'm after, where:
If you pick "Schedule_From" out of the DD-list, then DNR 'Schedule_From' is what is pasted in Column B in Sheet3.
I have two columns, column Q and R. Column Q has Data Validation set, where you can only choose one of four options in any given cell between rows 2-250,000. When "Complete" is chosen, the cell turns green. Now when "Complete" is chosen in column Q, I need the cell next to it in Column R to auto-fill today's date. However, the date should not update to the next day. So if the cell autofills to today's date, which is 12/6/13, tomorrow, when the date changes to 12/7/13, the cell still reads 12/6/13.
I have several columns (d,o,z,ak,av,bg) where I enter material numbers - there is approximately 180 different material #s. Columns (f,q,ab,am,ax,bi) are empty and designated for text/comments entry. Some material numbers need to have specific comment displayed - there is approximately 25 material numbers and each one has different comment attached to it. I need to display these comments automatically without user interaction. Material numbers change weekly and are in rows 5:130 in their respective columns (d5:d130,o5:o130,..etc)
This would be easily achieved with formulas in columns (f,q,ab,am,ax,bi) but I can't use formulas as these may be overwritten. Any thoughts of how to do it with VBA?
I have numbers that will display in column G. I have payment types entered in column E. So if 'C FUEL','FA','C M/C', is entered in column E I want the number in column G to be red.
In a sheet I am showing a calendar where a user can choose Day, Month, Year and if he/she presses enter the data is submitted in Sheet 3. This is working fine for me.
In this sheet ( Sheet3) I have the column headings as Day, Month, Year, Date and Submitted By.
Now in the user form I have a command button as Show data (User form Name CmdShow) and Text Box (User Form Name TxtDateLeave) . which I want is that when someone will click on Show data text box will show the data last row value of column D from sheet. Column D of sheet 3 may be Date or Text format.
I have written code for that
Private Sub CmdShow_Click() With Thisworkbook.Worksheets("Sheet3") Me.TxtDateLeave.text = .Cells(.UsedRange.Rows.Count, 4).Value End with end sub
trying to incorporate userforms into my spreadsheets.
At the simplest level, I create a form and display it using userform1.show.
However, I've noticed from some tutorials that the " proper" way to do it is to create an instance of the form before trying to do anything with it i.e.
Dim frm As New userform1 frm.show
way to initialise a userform? Is there a pratical difference between the two syntaxs or in reality does it achieve the same goal?
Is there something special that I *should* do in the initialise event to allocate memory for the form?
I have a userform that simply filters data on a spreadsheet through checkboxes. The form is filtering columns (B through N) to shorten the list of possible outcomes (data in column A.) After the user is done with the form I'd like to populate the data in column A (the results from filtering and there is no way to pre-determine how many rows will have data) with the user pressing a button on the form, into something the user can see without going back to the spreadshet. I was thinking I could populate the results into some field on the form; maybe a list box, txt file, using the camera function in Excel?
