Userform - Multiple List Box And Display In Cell Of Spreadsheet?
Jul 14, 2013
I have designed a multiple list box on my userform and display it on one of the cells in the spreadsheet but with each list item separated by a comma when its display on excel.
The problem with my code is the delimiter appears at the first list item, but it should only appear if more than one list item is chosen.
|Apple|Orange
I was thinking if there is something like if gItem = 0 then only display sFruits Else display what I have below???
VB:
For gItem = 0 To FruitsList.ListCount - 1
If FruitsList.Selected(gItem) = True Then
sFruits = sFruits & delimiter4 & FruitsList.List(gItem)
End If
Next
.Cells(gRow, "AO").Value = sFruits
View 4 Replies
ADVERTISEMENT
Nov 25, 2008
I must say I have learned quite a lot from this forum. So, a vey big Thank You to the folks who are managing this forum and those who are contributing possible solutions. I have a question about copying data from a spreadsheet to a List Box in a User Form (Pls see attached). First, I select the Account from the drop-down cell in the Main sheet. Then I click on the CommandButton and a UserForm will pop out with a List Box that draws relevant data from the Remarks sheet according to the Account that I have selected. The data in the List Box must be in this format : "Date1 : Remark1"; next line "Date2 : Remark2; line 3 "Date3 : Remark3"........until the last available entry.
View 2 Replies
View Related
Dec 8, 2012
I am trying to make a userform that will update a list in the spreadsheet. Basically if a user types into a multiline textbox numbers (separated by line) like so:
5
10
15
20
then the macro will paste that data at the end of a list so that each number is in a new cell. The only thing I have that comes close is Range("A1").value = listbox1.value The problem with this is that it will input the entire list into one cell. I have attemped various things, like trying to get the list into the clipboard and pasting, but I haven't really had much luck.
View 7 Replies
View Related
Feb 11, 2012
I have five comboboxes in userform1, they are link to Column A, Column B, COlumn E, Column G and Column Z of "Reference" worksheets respectively. The values in each column could contain duplicate values. However, I'd like to only display the unique values in those combo boxes and I have no clue how to achieve this.
View 7 Replies
View Related
Nov 8, 2012
I am trying to display multiple columns in my combobox on my userform.
I have it where it will find and load the data but when i select from the data only 1 column shows is there a way to have all 4 columns show up?
Dim lrowzz As Integer
lrowzz = (Sheets("graphs").Cells(Rows.Count, 1).End(xlUp).Offset(1, 0).Row) - 1 'new row to enter data into NEXT AVAIABLE ROW
Me.capac.List = Sheets("graphs").Range("B43:e" & lrowzz).Value 'populates the capa combo box on change capa tab
that is my code to populate the combobox using a dynamic range from B43 - D & Lastrow with data
Column b Column C Column D Column E
333 infoa dateA LocationA
334 infob dateb locationb
335 infoc datec locationc
when it loads the combo box i can see:
333 infoa datea locationa
But when I select 1 of the lines all that is displayed is Column B Data. How do i get it to still show all of it?
View 2 Replies
View Related
Sep 22, 2013
I want to create a macro to take multiple inputs from sheet 2, apply them simultaneously to the inputs on sheet 1, take sheet 1's output and list next to the inputs on sheet 2. I want to apply this to a spreadsheet with complicated calculations. Example spreadsheet attached. Related Macros I have will do a similar thing but only take one input at a time. Code as follows.
VB:
Sub x()
Dim r As Range
With Sheet2
For Each r In .Range("A2", .Range("A2").End(xlDown))
Sheet1.Range("A2") = r
r.Offset(, 2).Resize(, 3).Value = Sheet1.Range("C2:E2").Value
Next r
End With
End Sub
View 5 Replies
View Related
Sep 12, 2012
Depending on the result of a formula in R67, one of three things will occur. If the result is a 1, UserForm1 is displayed. If the result is a 2, UserForm2 is displayed. If it is nothing, nothing happens. Ok, I can do that.
However, with the code below, whenever I select any cell, and there is a 1 or a 2 in R67, the userform pops up. I only want it to pop up if I change a value in C6 which in turn changes the result of the formula in R67.
Code:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Range("R67").Value = 1 Then
Run "UserForm1"
End If
If Range("R67").Value = 2 Then
Run "Userform2"
[Code] .......
I've tried setting a monitored range. I've tried the code below in one form or another and it didn't work.
Code:
If Not Intersect(Target, Range("C6, R67")) Is Nothing Then Macro
View 7 Replies
View Related
Jul 25, 2014
I have two sheets. sheet2 is a lookup table. sheet1 is information sheet. i have created a userform where a user inputs data into 3 textboxes and clicks a button. i have the code for transferring the data from the textboxes into row after the last used row on sheet1, columns a,b,c. in columns d and e i have vlookup code that takes the value in column c and performs the lookup function to return values found in sheet2. this all works fine.
I am trying to display the vlookup results in a 4th textbox on my userform.
If I use this code:
[Code] ......
I receive a type mismatch error
if i use THIS code:
[Code] ..........
if works fine!?! what gives?
View 4 Replies
View Related
Dec 27, 2011
Is it possible to display a image embedded in the cell on a userform?
View 1 Replies
View Related
Sep 24, 2007
is there a way that i can insert cell values in a userform
i have data which needs to be displayed on 33 lines
line 1 cell value from d10 then space cell value from d185 then space cell value from d186
this needs to be repeated
line 2 cell value from e10 then space cell value from e185 then space cell value from e186
line 3 cell value from f10 then space cell value from f185 then space cell value from f186
line 4 cell value from g10 then space cell value from g185 then space cell value from g186
this continues trough to line 33
View 7 Replies
View Related
Apr 7, 2009
following on from previous post (http://www.excelforum.com/excel-prog...g-up-form.html) what if the selected cell is a merged cell (cell count is greateer than 1), what is the best solution to enable double click event on merged cell ?
View 2 Replies
View Related
Feb 8, 2014
I would like to take a List of numbers, which come from a separate spreadsheet, place them into a UserForm text box and then use a command button to input the list of numbers into a column of cells. The list would often vary, between 1 and 10 entries. But if I could do this, I would be able to resolve an issue with my spreadsheet that continues to haunt me (the dreaded number stored as text.....). I know that you can assign a single textbox value to a single range-cell value. But if I could input a list at a time, it would obviously save a lot of effort.
Example
In spreadsheet #1, I would copy the list below.
25466
87550
66985
44252
In the user form I would paste these numbers into the text box and they would be input into Sheet #2
B6 = 25466
B7 = 87550
etc. etc.
View 2 Replies
View Related
Dec 23, 2013
I have a workbook with 4 worksheet that store different type of data. It also has a userform that load at start of the application which is to search the data in the workbook. The userform has a combobox where the names of the sheets are stored. when the user selects say Sheet2 in the combobox, it enables the relevant textboxes on the userform and activates the worksheet at the change event. The userform has a search button that searches all the worksheets based on the text entered in a textbox.
The problem: how to search based on 1 textbox. What I want is: say for e.g the end-user selects sheet2 from the combobox, this intern enables 4 textboxes (Name, DOB, Nationality, ID #) on the userform. The end-user should have the liberty to enter data in 1 and/or any of the textboxes. The search should be performed, that if data is only in 1 of any of textboxes then give all rows that fit that criteria and display in a temp worksheet. if say the name and dob is filled by the user than what matches both should be displayed in a temp worksheet. if say dob, name and ID# given so the search button should narrow down to fit all 3 criteria and then display result in temp worksheet. As if mentioned data can be entered in either just 1 or any or all textboxes.
E.g. the worksheet is (Columns are Name, Nationality, DOB, ID#)
row 1 = name: Steven Martin, DOB: 27-may-1993, Nationality: Trinidad & Tobago, ID #: 1234567
row 2 = name: Gary Richards, DOB: 2-FEB-1993, Nationality: British, ID #: 456789
row 3 = name: David Cohen, DOB: 27-May 1993, Nationality: American, ID #: 98765
row 4 = name: Roberto McDonalds, DOB 21-Jul-1962, Nationality: British, ID # 654321
row 5= name: Gary Richards, DOB: 01-Dec-1978, Nationality: Australian, ID # 1234567
Now if the user enters only name as "Gary Richards" and search then row 2 and 5 should be displayed in a temp worksheet. if user enters name Roberto McDonald and ID# 1234567 then it should not display anything. if user enters DOB 27-may-1993 and nationality British and ID # 1234567 then as well shouldn't display anything and should a msgbox "no data found".
View 4 Replies
View Related
Jun 8, 2007
is there a way to get a cell to display a list, but only in one cell? I know how to get multiple words into a cell, but can i make them go ontop of eachother.
ex)
a1=dog
b1=cat
I can make c1=dog cat , but is it possible to make
c1= dog
cat
View 9 Replies
View Related
Feb 20, 2008
How could I create a menu that displays cells from another sheet when the appropriate menu value is selected?
For example, the menu (on sheet 3) would have:
Week 1
Week 2
Week 3
If I select Week 1, I want to display cells B4:B10 from sheet 2 underneath the menu. If I select Week 2, I want it to display cells B19:B25 from sheet 2 under the menu.
View 4 Replies
View Related
Apr 24, 2014
When inserting "1" in the cell under soup, i was thinking it will bring up a list of its ingredients and how much of that ingredient. The values are listed in the same spread sheet below.
The amount of the ingredient is in D50 (80grams) and the item type next to it in E50(onion)
Is it possible to put in "1" soup then it displays all the items in both those cells range example(D50-E50 to D60-E60)?
Is it possible to put the value "2" in soup and it shows double the measurements? example (160grams) (onion)
View 4 Replies
View Related
Dec 21, 2013
How to do this query but show all results found rather than just one result.
I want the result to be able to show multiple terms from the search terms and index.
for example
Bob's BMW and Ford
Result would be
BMW,Ford
Rather than just Ford
Is this possible?
View 8 Replies
View Related
Jul 25, 2006
how do i show a userform in Excel in the spreadsheet environment? I used to "run macro" but unable to run userform code "private sub".
View 2 Replies
View Related
Sep 16, 2009
Hoping someone would be able to help me with this. I have a sheet (example attached) and this sheet has a number of varying description types in the W coloumn (usually approx 10,000 rows). This field is manually input so there could be spelling mistakes and/or non standard descriptions.
What I would like, if possible, is a macro that would look at the D column and if this is 'GENERAL LEDGER', it would then look at the W column.
An input box would come up, and would list the different descriptions it found in column W, and number them. It would only list each different description once.
e.g.
1. Bank charges
2. Bank charge
3. Cash
4. Fund Custodian Fees
5. Fund Manager fee
6. Interest income cash account
7. Interest income cash acc
8. Miscellaneous expenses
9. Miscellaneous income
10. Other income
11. Sec lending comm
12. Sec lending commission income
13. Tax Reclaimable - Dividends
14. Withholding tax dividend
The user would then be able to type in the corresponding numbers, if possible seperated by a space, comma or semicolon and the macro would then run through the sheet and delete the entire row if D was GENERAL LEDGER and W was the selected description.
View 9 Replies
View Related
Jun 4, 2013
I need to display a set of cells based on the value of two drop down cells i have. As I am not very good at english and worse at explinations, I'll try via screen shots...
I have two dropdowns (C4 and C6) that will indicate what table to use (Second sheet / screenshot). I want that "table" to display in the yellow box on the first page. To complicate matters, some options do not have a CLA option - those starting with X. As there are 24 different outcomes and each is 3x9 if/then statements just dont seem to cut it.
P.S. I have excel 2010 and windows 7
View 1 Replies
View Related
Dec 23, 2009
Is there a way to have a spreadsheet NOT display a #N/A, #NUM, #VALUE, #NAME error just because of an empty associated cell in the formula? I know I can do it with qualifiers (eg. if(true, then, else). But is there way to have the sheet just not display the error. I'm just trying to make the sheet look better without writing the qualifying formulas.
View 2 Replies
View Related
Aug 21, 2014
Attached is an example of what I'm trying to do. I've got a master sheet and four sheets, each for a different store. Each store carries the same five items with varying prices. I've set up the master to show the lowest price of each item and have the formula set to display the minimum price. I'd like column D to show the store from which the lowest price came. It can either show the sheet name or display cell A2, as that's the store name on all sheets.
Example.xlsx
View 5 Replies
View Related
Feb 25, 2012
I am using excel as a scheduling program. The sheet has days of the month across the top, and staff names down the column. We have 5 shifts D,A,B,C,N. I am using the following formula to display if shifts have been scheduled for the column
if(countifB10:N23,"N")=1,"X","N") i.e for the night shift. I then use conditional formatting to change the cell to green if the night shift has been scheduled, or red if it has not.
I would like to have the results of all 5 formulas display in a single cell, to save Real Estate, then have the cell go green when all shifts have been scheduled for the day (column).
Is this even possible?
View 3 Replies
View Related
Jul 30, 2009
I am trying to create a formula to display a string of text that refers to multiple cells. for example, =If(A1=0,"insert text here" &B1 "insert more text here" &B2 "insert even more text here" &B3, "insert text here" &C1 "Insert text here").
It works fine for one cell value, like ="Total: " &A1
View 8 Replies
View Related
Oct 1, 2013
I need to build a formula to have one cell display multiple options depending on a value in another box.
If Value is >x and <x display Y
Details:
Cell D5 Holds a dollar amount. E5 is where the calculation will happen. Logically i need it to do the following exactly:
If D5 is between 5000 and 9999, display 75. If D5 is between 10000 and 14999 display 150. If D5 is between 15000 and 19999 display 200. If D5 is >20000 display 250.
View 2 Replies
View Related
Sep 13, 2013
It's a quarterly schedule for utility meter readers, divided up into days across the top, and routes/areas down the side.
There's a space with each route for the employee ID to go, depending on who's doing it.
Down the bottom of the sheet, there's a few empty lines for all the available employees who haven't been allocated to a route.
On the second sheet labelled EMP LIST, is all the employee IDs. It's also got the areas they work- it's for something I want to implement later.
I can put all the employees into a single column list, then use basic DV to give a dropdown menu by each route, to assign an employee to it. This is pretty straight forward. I've also been playing with this in combination with a countif, so that employees already assigned do not appear in the list.
This is about as far as I've managed to get with it.
I need to get the employees who aren't assigned to anything to appear in a list below the routes. I'm fairly sure this is just another countif, but I'm not 100% on the exact formulas.
I also need the list in the dropdown menu to reset for each day of the quarter, i.e. if I assign an employee to a route on the 30th day of the quarter, their ID will disappear from the list for any other route for that day, but will still be there for the other days of the quarter.
So far the only way I've managed to do this is by duplicating the employee list for every day of the quarter, which is going to get very cluttered, and also makes staffing changes difficult. I'm hoping there's an easier way to do this using one data set.
I've added an example of the sheet. It's one week and it's only got about 1/3 of the routes we would actually have on any given day.
scheduledemo.xlsx
View 1 Replies
View Related
Nov 4, 2012
I wish to Automatically copy the TEXT that is written from Spreadsheet 1 cells D5 to F5 to Spreadsheet 2 cells F5 to J5 .... a similar range of cells.
Is there a formula I can use or do I need to venture into the programming side of things.
View 7 Replies
View Related
Dec 21, 2012
In a sheet I am showing a calendar where a user can choose Day, Month, Year and if he/she presses enter the data is submitted in Sheet 3. This is working fine for me.
In this sheet ( Sheet3) I have the column headings as Day, Month, Year, Date and Submitted By.
Now in the user form I have a command button as Show data (User form Name CmdShow) and Text Box (User Form Name TxtDateLeave) . which I want is that when someone will click on Show data text box will show the data last row value of column D from sheet. Column D of sheet 3 may be Date or Text format.
I have written code for that
Private Sub CmdShow_Click()
With Thisworkbook.Worksheets("Sheet3")
Me.TxtDateLeave.text = .Cells(.UsedRange.Rows.Count, 4).Value
End with
end sub
But this is not working. is there any other way?
View 3 Replies
View Related
Dec 15, 2006
trying to incorporate userforms into my spreadsheets.
At the simplest level, I create a form and display it using userform1.show.
However, I've noticed from some tutorials that the " proper" way to do it is to create an instance of the form before trying to do anything with it i.e.
Dim frm As New userform1
frm.show
way to initialise a userform? Is there a pratical difference between the two syntaxs or in reality does it achieve the same goal?
Is there something special that I *should* do in the initialise event to allocate memory for the form?
View 5 Replies
View Related
Feb 17, 2007
Is it possible to display a Pdf file on a Userform or in a textbox etc. on said form?
View 9 Replies
View Related
