Displaying Which Sheet A MIN Value Is Found On

Aug 5, 2006

I have several worksheets of data, and one sheet that I wish to serve as a summary. I have the following function on this summary sheet: =MIN(Sheet2:Sheet4!C1)

This displays the minimum value for the given range, however I don't want the value, I want to know which sheet is was found on...so instead of 3 it might say Sheet2 if Sheet2 containded 3. I've spent quite a while trying other solutions to other similar problems but I just can't figure this out; and I don't have the experience to code a solution myself.

View 8 Replies


ADVERTISEMENT

Delete Rows In Sheet A If Any Conditions Found In Sheet B

Jul 3, 2014

I am trying to write a macro where it will delete rows in Sheet A if any condition is found in the row which is based of conditions in Sheet B.

Sheet A :
Column A Column B Column C Column D
1234 ABC tyu 4588
asd qwe www 4455
zxc zdaa 1234 4441
ghj llll 1111 poo0

Sheet B (where i kept my conditions in Column A: )

Column A
1234
1111
(and many more....)

the end results will be the Row 1 and row 4 will be deleted. I have tried to google but most only contains deleting rows with a specific conditions.

View 10 Replies View Related

Displaying Sheet Name In A Cell

Jan 8, 2009

Is there a command or macro to display the name of a sheet in a cell?

I know how to do it in a header or footer, but not in a cell.

I need to copy the name that appears at the bottom of a spreadsheet in a cell at the top -- no need to reference the name of a different sheet, just the same one the cell is on.

View 9 Replies View Related

Grabbing Data From One Sheet And Displaying On Another

Oct 21, 2008

I am seeking a method of collecting data from one sheet in a workbook and displaying it on another, based on a search.

e.g.

Sheet1
Garcia Joe 11111
Garcia Matt 22222
Hernandez Efrain 33333
Matias Jorge 44444

What I want to do is to have Sheet2 be a query for Sheet1--that is, in a cell in Sheet2, the user can type 'Garcia' into a cell and thus display the matching entries from Sheet1, e.g.

Sheet2
'Garcia' displays

Garcia Joe 11111
Garcia Matt 22222

View 11 Replies View Related

Reading And Displaying Numbers From One Sheet To Another

Feb 9, 2010

I have a list of client names with their respective numbers on a sheet 1 and I have a list of jumbled client names with the names repeated in the next sheet 2. I would like to retrieve the client number from the data sheet and display the number for that respective client name in the second sheet

Sheet 1:

Client Number Client Name
1 David
2 Tom
3 Suzan
4 Richard

Sheet 2:
Client Name Client Number
Richard
Tom
David
Suzan
Richard
Tom
David

I want the program to retrieve the client number for the names from sheet 1 and display it accordingly in sheet 2. For eg:- it should retrieve Richard's client number as 4 from sheet 1 and display digit 4 next to richard's name in the client number column. I have attached the sample document.

View 3 Replies View Related

Displaying Sheet In Tabular Format Using Vba

Dec 24, 2009

display a sheet in the following format using excel vba ....

View 9 Replies View Related

Displaying Multiple Leaders In A Score Sheet

Mar 7, 2009

I'm Seeking in InRegards To Working Out How To Display Multiple Leaders Within The Same Cell Based Apon There Score In A Game Of Golf, Or If This Cant Be Done Perhaps A Message Saying "Multiple Leaders" So That It Is Known That Its Not Just The One Persons Name That Is Been Displayed. I Have Attatched The Document I Have Been Playing With While Trying To Work It Out Before Making A Big Sheet.

As You Will See "Daniel" And "Paul" Both Have The Same Score, And Below In The Summary It IS Currently Only Showing "Daniel" As The Scratch Leader, Is There A Way Of Getting It To Show Them Both As A Leader, EG: "Daniel, Paul", Or As Said efore Just Saying "Multiple Leaders" Thus Having To Manual Go Through Them ( The Fist Option Would Be Better As There Will Be Approx 85 Names In The Final Sheet)

View 5 Replies View Related

Displaying A Form While Allowing Sheet To Be Editable

May 4, 2009

i want to do the following: initialize a sheet by showing form1, which accepts user input for rows and cols name a range on the sheet of size rows x cols display form2 which is just a "DONE" button that they click when they're finished pause/stop the macros and allow the user to fill in values for that range start up some other macros when they press the "DONE" button.

i tried it and found that when you display a form it locks the sheet (can't select the sheet to input values) and you can't even alt tab away from the form. is there a way around this?

View 2 Replies View Related

Put An Image For Each Record In The Sheet While Displaying Records

Mar 12, 2009

I get some records from XML and display in the sheet. Now, I need to put an image for each record in the sheet while displaying records. And also on click of the image I need to have some code to be executed.

View 5 Replies View Related

Displaying Sheet Name Before All Cell References In Formula

Oct 11, 2013

Any way to always include the sheet name before the cell address in a formula? For example, in my "Summary" sheet, I have a formula:

Code:
=A2 + B4/B5

However, without typing anything else, I'd like the formula to populate the sheet name since I will be extracting the formula as text and need the full reference:

Code:
=Summary!A2 + Summary!B4/Summary!B5

A way to get around this is to enter the equal sign, then temporarily select another sheet, then go back to the "Summary" sheet where all cell references will include the sheet name, but if there is a quicker way to do it using some kind of property or event in VBA, that would be ideal.

View 1 Replies View Related

Return Focus To Sheet While Still Displaying A UserForm

Dec 16, 2009

I have a spread sheet where i want to display help text when cells are activated. I do not want to use comments as i both do not like the red triangle and also have not found a way to controll the position of the text box. When I use the event Worksheet_SelectionChange I can display a custom box but the box "retains focus" and i can not enter the data until i "reclick" on the cell in the sheet. The box then goes away when i select another cell. Is there a way to fix this or a different method entirely. I am using Excel 2007.

View 9 Replies View Related

Indexing Dates, Blank On One Sheet Displaying As 00/01/1900

Feb 12, 2010

I am indexing dates from one workbook to another.

There are some blanks in the list that I am using, and I need to the blanks to stay as blanks in the sheet that I am indexing to, however they are displayng as 00/01/1900.

View 4 Replies View Related

Extracting Similar Data From Different Worksheets And Displaying On One Sheet?

Apr 13, 2012

I have two work sheets as-

Sheet1

idnameclassscores
1abc280
2efg276
3hij555
8klm478
9mno490

Sheet 2

nameschooldate of admission
abcpublic school2/9/2011
efgpublic school3/4/2010
hijprivate school5/9/2011
klmprivate school8/9/2011
mnoprivate school9/10/2011

now what i want is - on sheet 3 compiled data as-

idnameclassscoresschooldate of formation

View 1 Replies View Related

Delete Sheet If Found

Mar 31, 2009

Is there a scripting way to delete a sheet name if found ?

Is there a scripting way to create a sheet name based on a cell syntax ?

Is there a scripting way to find text in a sheet based on a cell syntax from another sheet ?

View 9 Replies View Related

Displaying Some Cells Data Depending On Selected Text From Other Sheet

Dec 31, 2013

I have an excel sheet which looks similar to below and with some more columns.

HTML Code: 

AreaBranchEmpolyeesProductsShelfs
Area1Area1 Branch110Product 110
Area1Area1 Branch25Product 16
Area1Area1 Branch38Product 28

[Code] ......

I want to have data in other sheet With respect to Product details. Where It gives me the count of Product 1 and so on.

I am able to get the count using countif function and it displays like below.

HTML Code: 

Product Count
Product 16
Product 28
Product 34
Product 49
Product 510
Product 68
Product 78
Product 89
Product 97
Product 108

What I want is when I select "Product 1" It should display some selected columns data from sheet where complete data is available.

HTML Code: 

Branch Empolyees Other
Area1 Branch1 10 abc
Area1 Branch2 5 xyz
Area1 Branch5 7 pqr
Area2 Branch5 5 wxy

Which function we can use. I tried Vlookup but was not successfull.

View 14 Replies View Related

Macro - Insert New Sheet If Value Found

Aug 29, 2013

I have a code that copies rows to another sheet if a value in D:D is found. BUT I need to add a "create sheet" IF the value exist.

So if VBA finds the value "TWO" in Column D, then insert a sheet at the end named "Two"

Then the code below will copy all the values of "TWO" over to sheet "TWO"

Dim LR As Long, i As Long
LR = Range("A" & Rows.Count).End(xlUp).Row
For i = 2 To LR
If Range("D" & i).Value = "9" Then Rows(i).Copy Destination:=Sheets("Sheet1").Range("A" & Rows.Count).End(xlUp).Offset(1)
Next i

In essence, the VBA should:
Search for "ONE" in D:D, not find anything and move on.
Search for "TWO" in D:D, will find it, Create a New Sheet named TWO, then the above Code to copy all matching rows into sheet TWO.
Search for "THREE" D:D, not find anything and move on....

There will be roughly 12 sheets created on average, so if I create all sheets beforehand.

View 1 Replies View Related

Add Rows Based On Found Row On Another Sheet

Dec 17, 2006

I want the code to insert a line under the row in which the code will find the value of the cell from an another sheet (there are two sheets - enter and base). If the code can't find the given value it should go to the last empty row in sheet and then perform some action (probably copy/paste job). Here is the code I came up with, the only thing I don't know is how to set the searched value as the A1 cell value of the sheet "enter" and what procedure to use in case this value is not found.

Sub findme()
'x is the A1 cell value in sheet enter
Workseets("base").Activate
Columns("B:B").Select
'if the following find procedure is successful
Selection.Find(What:=x, After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False).Activate
'then
ActiveCell.Offset(1, 0).Activate .........

View 8 Replies View Related

Error File Cannot Be Found When Print The Sheet

Feb 9, 2010

With this macro i print nine sheets. If there is one missing, excel gives a warning that the document cannot be found. I want excel to go ahead with the following document.

View 4 Replies View Related

Code To Look For Data - When Found Remove To Another Sheet

Feb 5, 2014

I have a file that I want a code to look for certain data and when found move the row to another sheet. The code needs to look at the active sheet because the name of the sheet will be different everytime I use it. It will also need to create another sheet named 'Online' that these rows are moved to.

The code will need to look for data that begins with either OAP, MCP, CPP, F4P, VAP, VWP, ITP and MEP. These will be followed by numbers i.e MCP123456. Once these are found I need the entire row removed to the created sheet.

The columns that these numbers will be in will vary on each file I use it on so it needs to look at the entire sheet rather than specific columns.

Also any cell that has data that begins with either MH and JD followed by 6 numbers that row needs deleting completely.

View 9 Replies View Related

Copy Row From One Sheet And Paste To Another If A Key Word Is Found In 1 Column?

Apr 15, 2014

I have 10 worksheets in my workbook. The two that I'm concerned with in this post are "Main" and "Completed".
If Column AA in "Main" contains the word "Complete" (which is from a drop down list) I want to copy the entire row from "Main" and paste in the "Complete" sheet without over-writting previous pasted rows.

Back in sheet "Main" I want the data in that row to be cleared with the exception of Column A as it contains a formula for sorting blanks. If I delete that row it will mess up my links on other sheets.

View 14 Replies View Related

Search Sheets For Value & Return Sheet Number When Found

Feb 16, 2008

i have a workbook with several sheets in it. i would like to make a userform were i could put a number in a text box eg E045698.then use a command button to search all the worksheets for that number and display the sheet number where that number is in another textbox.

View 5 Replies View Related

Fill ListBox With Found Values Sheet Names & Cell Addresses

Feb 22, 2008

I have a spreadsheet containing a list of key fob numbers, key numbers, etc. I have 3 userforms with different for different options, i.e. Key fob no. search, key number search, room number search. I have set up the code for each of the userforms to search for the information entered in the textbox and then lists the info in the listbox which I can then click on the one of the listed items to take me directly to the place in the spreadsheet.

However since there are a range of different key numbers per key fob, I would like to know what code I can use to allow a range of information such as the key number and room number, etc to be displayed in the same listbox as the Key fob number i searched for.

Here is my code for one of the Userforms:

Option Explicit

Sub Locate(Name As String, Data As Range)

Dim rngFind As Range
Dim strFirstFind As String

With Sheet1.UsedRange
Set rngFind = .Find(Name, LookIn:=xlValues, lookat:=xlPart)
If Not rngFind Is Nothing Then
strFirstFind = rngFind.Address
Do

I cannot attach a example of my form since the site seems to have a limit on the size of the upload and my part of the file compressed in zip format is still at 168kb.

View 5 Replies View Related

Displaying And Un-Displaying Objects Using VBA..

Apr 21, 2007

Is It Possible to use VBA Coding to Display An Image (Object),
And Un-Display or Remove that Same Image (Object) using a VBA Code?

Example:

I have a Mailbox Picture that I would Like to Show, but only when a cell's
value = 5. If the Cell's Value is not 5, then don't display the mailbox.

View 12 Replies View Related

Displaying Zero

Nov 24, 2009

I have tried different formula involving with decimal places.

If A1 has a whole number like 5141234 then the result would come out as a whole number =(A1-5148000)*1.000440935+48000

If A1 has three decimal places like 5142356.654 then the result would out as three decimal places

View 4 Replies View Related

Displaying Text But Having A Value?

Feb 13, 2014

I was looking to have a Word for example 'Apple' but want it as a number e.g '10'. I want to use it so that I can add up the prices of items by just clicking on the name of the item. So If I want to add up 3 items e.g. an apple , a banana and a pear which all cost £10 each I want to be able to click all three items and get the total of £30 displayed in a certain box.

View 1 Replies View Related

Displaying Day As A Formula

Oct 11, 2008

I'm working with a worksheet with one sheet per day of the month (we use a master, copy/paste, change the copy to the current month, and go from there). I've already got it to figure the dates based off (really difficult).

View 3 Replies View Related

XML Chart Not Displaying

Dec 19, 2009

I have an XML file which I can open in Excel as an XML table. When I try to insert a chart from any of the data, a chart appears but the data appears as the legend but not as any lines on the chart. The column headings, which would normally appear as the legend, do not appear. The chart itself is blank. Does anyone have any ideas of a way to solve this?

View 10 Replies View Related

Displaying A Value When There Is A Value In Another Cell

Feb 18, 2010

Refer to the attached worksheet. On entering a value into cell C7, I'd like the value of the adjacent column D7 to be displayed in F6. Then when a value is entered in manually into C8, it will then update and put the value of D8 into F6. The idea is an individual will enter a value each week, updating that value. I intend to hide column D.

View 2 Replies View Related

Displaying Horizontal Bar

May 22, 2013

I cant see my A B C D bar in a spreadsheet page. I can see it in the same book different sheet though.

Excel options/advanced/display options for worksheet/ show row and column is ticked

And also tried simply Unhide on the vertical column 1 2 3 4

View 2 Replies View Related

VBA For Displaying Data

May 2, 2014

I have an excel sheet which contains details of quantities supplied of a particular party by an agent! It ranges from a period of April to March In Some places the agent has supplied a party's material only from april to december and jan,feb , march is supplied by a different agent for the same party.

I want to create a report which is as follows: When i choose an agents name, It should show me all the parties to which he has supplied the material and all the months from april to march. If he has not supplied in a particular month then show zero. Same should be for all the agents.

I need to create this report and i was trying with pivot tables but that didnt work!

I guess it can be done using vba code!

I have attached a sample file : Data Filtering VBA.xlsx‎

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved