VBA code which can distinguish whether a cell has been edited by:
selecting an option from a data validation list (DVL) or manually editing the text in a cell?
The ""Show error alert after invalid data is entered"" option is unticked to allow both selection from the DVL as well as free format text entries.
The problem arises when using the code below which makes an edited cell within a range display the new value as well as the prior value(s). This works well when using the DVL but not when editing the cell.
Is there any code which can distinguish between the 2?
I want to make an excel funktion than can distinguish between 3 variables. The three variables are the outcomes of my first function which are 0, 1 and 2 these IF functions can be seen below: =IF(B11>52;"1";"0") =IF(B12>5;"1";"0") Then when I have these results I have tried the following function: =IF(C11+C12=2;"6-12";"4-6") By using this function I get an output for 2 (true) and 0 (false), but I would also like an output for 1 (which would be 6 in my work) It looks like this: Var 1 58 1 Var 2 4 0 Suggestion 4-6
So in the above case where the sum of var1 and var2 is 1 it is only counted as false for not being 2 and therefore = 4-6 instead of what I would like it to be = 6 (for 1)
The following formula looks through a list of names (in this case, looking for Joe Smith) in the monthly tab (in this case, MARCH) from column B and enters the calculated value associated with that name from column G. The formula works fine, but when there is no value in column G, it returns a 0% (format in the receiving cell is set for %). This would be fine, but since it does not distinguish between a true 0% and a blank cell, this is causing a problem.
Which pulls data in from another sheet in the workbook. If the referenced cell is empty, this has value 0.
I'd like to then include this cell in the calculation of an average, ignoring it if the cell it pulls from is empty but including it if that cell contains 0.
I am trying to find a formula that will count the number of unique entries there. I have tried the solutions posted on various websites to no avail (most recently:
I have an existing Cash Flow Report that has a column of abbreviated/shortened (WBS Element) title where each cell contains a unique three lettered/numbered amount of characters (Example: 200). These three abbreviated character cells are specific and relate to their full/longer (SAP WBS Element) title (Example: WBS DWRRI-BW066-200).
In my attached excel model (Find, Locate, and Align WBS Elements to Cash Flow Report.xlsx), I need a formula for the, "Cash Flow Report WBS Elements" sheet in cells B3 thru B11 that will look at the abbreviated three lettered/numbered (WBS Element) titles in cells C3 thru C11, then search and recognize its unique counterpart contained in the, "SAP WBS Elements Export" sheet and return this full/longer (SAP WBS Element) title to the, "Cash Flow Report WBS Elements" sheet in cells B3 thru. B11, just to the left of its abbreviated/shortened (WBS Element) title.
I have an existing Cash Flow Report for my work that has a column of abbreviated/shortened (WBS Element) titles where each cell contains unique three lettered/numbered characters (Example: 200). These three abbreviated character cells are specific and relate to their full/longer (SAP WBS Elements) titles (Example: WBS DWRRI-BW066-200).
In my attached excel model (Find, Locate, and Align WBS Elements to Cash Flow Report.xlsx), I need a formula for the, "Cash Flow Report WBS Elements" sheet in cells B3 thru B11 that will look at the abbreviated three lettered/numbered (WBS Element) titles in cells C3 thru C11, then search and recognize its unique counterpart contained in the, "SAP WBS Elements Export" sheet and return this full/longer (SAP WBA Element) title to the, "Cash Flow Report WBS Elements" sheet in cells B3 thru B11, just to the left of its abbreviated/shortened (WBS Element) title.
Find, Locate, and Align WBS Elements to Cash Flow Report.xlsx
I am working on sales information which includes postcodes. What i need to do is seperate the first or first two text characters from the rest of the postcode. I have attached a small snipet of what i am working on. Currently i am using the =Left(A4,2) but this will give me in some case a numerical value aswell. For example E1 or G1 in the case of the sample attached. Is there a formula that exists where it will just return the text values in a cell and not numerical values.
I have a worksheet with several columns. I need a formula to search column D only and each time a specific location is identified to replace that location with alternate text. Example (ORIGNAL TEXT):
Column Dtext to text help.xlsx BIRD FISH DOG BAT BUG
I need to search that listing and each time the word BIRD is mentioned have it replaced with FEATHERS and each time DOG is listed have it replaced with TAILS Final result would look like:
FEATHERS FISH TAILS BAT BUG
All other text should stay the same and replacement text should appear in the cell of the text it is replacing. This is a sheet used by multiple people several times a day and so the Find/Replace option really won't work.
Have working on this for at least 6 months and it just isn't going to happen for me. I thought I could use a Conditional format, but that is producing no results either.
I have a situation where I have to curve fit data, this can lead to different formulas being used with varying constants.
Is it possible to pickup a TEXT based formula and related constants from other cells, and then place this into another cell as a functioning formula. For Example
Cell A1 contains the formula as a text string whether it be y=a+bx+cx^2, or y=a+b/x, etc Cells A2:A6 contain the individual constants, a, b, c, etc
I would then want the VBA to read the text based formula and put it into an output cell as a functioning excel formulae.g
In cell B10: =a+b*A10+c*A10^2
I understand picking the constants up and putting the formula should not be too much of an issue, however trying to insert the variable form of the curve fit is the part that I am struggling with, and am unsure if possible.
I would like to copy a formula in a cell and then paste only the text of the formula, but I can't figure it out. Basically, I would like to avoid going into the cells and absolute referencing or hitting F2, then copying the text.
When I hit "Ctrl C" to copy the cell, then hit "Alt/E/S/F/Enter" to paste the formula, it is just like a regular copy/paste formula-wise in that the references move.
This is going to be hard to explain but, ill give it a try
I have a list of formula written in text in columnB (-0.0045*x^3+0.2696*x^2-6.0587*x+100)/100 (-0.0045*(x*1.3)^3+0.2696*(x*1.3)^2-6.0587*(x*1.3)+100)/100 (-0.0045*(x*1.5)^3+0.2696*(x*1.5)^2-6.0587*(x*1.5)+100)/100 (-0.0045*(x*0.8)^3+0.2696*(x*0.8)^2-6.0587*(x*0.8)+100)/100 (-0.0045*(x*1.3)^3+0.2696*(x*1.3)^2-6.0587*(x*1.3)+100)/100 (-0.0045*(x*1.5)^3+0.2696*(x*1.5)^2-6.0587*(x*1.5)+100)/100
each formula correspond to a type of road in columnA Rural Local Rural Collector Rural Arterial Urban Local Urban Collector Urban Arterial
I would like to create a formula that will choose the right formula and substitute the variable "x" by a specific cell (lets put $Z$1) to finally give me the final answer in column C.
I am using =INDEX(7:7,MATCH(9.99999999999999E+307,7:7)) to return the current price of a product. I would like to be able to have the formula return either a text value (discontinued) or the current price, ie column G contains the current price and if it is a discontinued item I could just type in "dis" instead of the price when updating the sheet.
A B C 3.10 Leaver 3.10 here I want value Leaver returned -1,482.75 1,687.50 204.75 -3,120.00 3,000.00 -120.00 -760.00 1,000.00 240.00 -1,495.00 1,625.00 130.00 -1,107.91 1,204.25 96.34 -1,708.99 1,298.75 -410.24 -2,297.28 2,500.00 202.72 -1,150.00 1,250.00 100.00 -2,150.51 2,156.25 5.74 -1,557.31 Starter -1,557.31 Here I want value Starter Returned -263.97 1,649.75 1,385.78
* text value is only in column B. see attached File
i want to calculate value from A1 if A1 is more than 10,000 then i want to say Profit + extra value in B1 then in C1 i want to compute 25% of the C1 and then in D1 i want to divide D1/8
if A1 is less than 10,000 or equal to 10,000 then i want to say "Lost" in B1 and cell C1 No Bonus & D1 should say "No Luck"
i used following formulas but these are not giving all requirement.
I am currently in the making of a new financial plan template and I am having a problem arranging all of the rows in an orderly manner. I was wondering if i could have a sentence and at the end of the sentence a number figure. I cannot use a cell to the right because that way there is a gap and it looks pretty bad.
I'm trying to create a formula for text to columns if a SKU is put into a box.
Ex) I put code 5495307H7G-**--A into cell A1. I need to split it after specific positions, so it breaks into nine individual codes (9 cells) in the adjacent boxes.
549 53 07 H 7 G- ** -- A
I've seen formulas for searching for spaces and splitting, but is there a way to split one long code at specific points?
Scott Feldman (hou) - throws R vs. ari - 8:10 PM ET - Minute Maid Park RotoGuru ESPN MLB Yahoo BB-Ref FanGraphs
What formula would I need in cell B1 to return "Minute Maid Park" But if possible don't return anything after that text starting with the word RotoGuru?
Best way it looks like is to find the 3rd " - " and take whats to the right of that?
I have an excel work book that I want to extract certain info from Each tab where in the result tab I use this formula to get required data from another tab.
I has about 24 tab , in the 25th one i collect data from all previous , using below formula inside each cell to get
All I want to do is insert a formula into a text box. This thread answers the exact same question but I don't understand how to highlight the text box as an object... [URL]....
on the attached sheet i am trying to extract the number from the cell "under 200.5 pts" so i get just 200.5 then the cell with "L" in changes dependant on the number in the total points cell. When i try, i am getting the same answer regardless whether the total points number is higher or lower than the extracted 200.5.
Here is the situation A B Name + Work placeName joe blo gg@xyzplcjoe blo gg Not assigned#VALUE!in Cell B3 Instead of it returning error. I need if there is no "@" then I want it to retuen as whatever value there is in Cell A3. * Also at the same time I would like return value withoutspace
Need a formula to extract text from first column of data (column c in attached sheet) and result should look like below (or column E in sheet attached):
I am trying to create my household budget in Excel, but there is a sub-category.
I need a formula which will calculate the following:
Under the "Daily living" section, I have typed the names of the sub-categories, eg: , Groceries General Household Cleaning Education/Lessons Cash
I want it to find all totals next to the word "groceries" in the main part of the spreadsheet, where I type in my credit card statements according to date.
In other words, I want it to add up all my entries/totals next to the word 'groceries' and show the total up at the top of the document, in the "amount" column so I can see the monthly category totals at a glance.