Distinguishing Between 0 And Blank Cell?
Apr 25, 2014
The following formula looks through a list of names (in this case, looking for Joe Smith) in the monthly tab (in this case, MARCH) from column B and enters the calculated value associated with that name from column G. The formula works fine, but when there is no value in column G, it returns a 0% (format in the receiving cell is set for %). This would be fine, but since it does not distinguish between a true 0% and a blank cell, this is causing a problem.
=SUMIF(MARCH!B2:B31,"Joe Smith",MARCH!$G$2:$G$31)
View 8 Replies
ADVERTISEMENT
Dec 17, 2012
Suppose I have a cell containing the formula:
Code:
=INDIRECT("'"&B$3&"'!J"&ROW($J11))
Which pulls data in from another sheet in the workbook. If the referenced cell is empty, this has value 0.
I'd like to then include this cell in the calculation of an average, ignoring it if the cell it pulls from is empty but including it if that cell contains 0.
View 2 Replies
View Related
Mar 20, 2014
VBA code which can distinguish whether a cell has been edited by:
selecting an option from a data validation list (DVL)
or
manually editing the text in a cell?
The ""Show error alert after invalid data is entered"" option is unticked to allow both selection from the DVL as well as free format text entries.
The problem arises when using the code below which makes an edited cell within a range display the new value as well as the prior value(s). This works well when using the DVL but not when editing the cell.
Is there any code which can distinguish between the 2?
[Code] ....
View 5 Replies
View Related
Jan 20, 2009
I want to make an excel funktion than can distinguish between 3 variables. The three variables are the outcomes of my first function which are 0, 1 and 2 these IF functions can be seen below:
=IF(B11>52;"1";"0")
=IF(B12>5;"1";"0")
Then when I have these results I have tried the following function:
=IF(C11+C12=2;"6-12";"4-6")
By using this function I get an output for 2 (true) and 0 (false), but I would also like an output for 1 (which would be 6 in my work)
It looks like this:
Var 1 58 1
Var 2 4 0
Suggestion 4-6
So in the above case where the sum of var1 and var2 is 1 it is only counted as false for not being 2 and therefore = 4-6 instead of what I would like it to be = 6 (for 1)
View 13 Replies
View Related
Apr 10, 2014
is there a formula i could use to distinguish between a character being text or a character being value?
i.e.
Cell A1 = 1
Cell A2 = G
=If(A1="value",TRUE,FALSE), answer = TRUE
=If(A2="text",TRUE,FALSE), answer = TRUE
View 3 Replies
View Related
Aug 2, 2014
I can't modify my formula to leave blank cells blank when dragging it down, Also, I've got two formulas that i need to combine. Please view the comments I've put in cells E4, F2,F3,H2 and I2 to understand clearly what am seeking. See the attached worksheet.
View 8 Replies
View Related
Aug 12, 2014
I have one column that contains an If statement formula and would like the next column to then work off of the first column (i.e. if that 1st column returns a value then then adjacent column uses that result).
What is happening now is that it is returning #value (because I guess technically the cell isn't blank?)
View 5 Replies
View Related
Mar 12, 2014
I am looking for an IF statement that would leave a balance cell blank if both the revenue and expense cells are blank, otherwise a formula would be calculated.
View 8 Replies
View Related
Mar 22, 2014
I presume this is fairly simple to do, since it's certainly easy enough to do manually by filling in a couple of rows and dragging them down, but I need it to be performed in a macro that I can run before other macros run.
What I need specifically is for the macro to go to G1 and insert the number .01... Then go to G2 and insert .02... Then G3 and insert .03... And repeat this until it finds the first non-blank cell ( row number this occurs at varies), at which point it ends and does nothing to that populated cell or any other cell in the column thereafter (including other blanks farther down).
This all needs to be done in Arial, 10pt, white.
View 10 Replies
View Related
Feb 27, 2013
I have a list that looks something like this:
Column B
Row 4 Item 1
Row 5 Item 2
Row 6
Row 7
Row 8 Item 3
Row 9
Row 10 Item 4
Row 11
Row 12
Row 13
Row 14 Item 5
The range of cells in column B containing the items has a name "ColStreams"
I need to go through the list, filling in each blank cells with the value contained in the first non-blank cell above it - so, in this case, rows 6 and 7 would contain "Item 2", row 9 would contain "Item 3", rows 11-13 would contain "Item 4" and so on.
View 2 Replies
View Related
Nov 17, 2008
The formula below calculates appropriately, however, if any of the cells (E12,E14, E21, E22, E28, E29) are blank, it returns a #VALUE! error. I would like the cell to remain blank. How can I do this? The formula is listed below.
=(SUM(E34-E6)-(SUM((E12)+E14)-(SUM((E21)+E22)-(SUM(E28)+E29))))
View 9 Replies
View Related
May 8, 2014
Im currently writing a payroll sheet within excell and trying to write an IF statement to make a cell blank if referring to another blank cell but it is showing the formula is incorrect. Below is the following IF statement that im using;
=IF( F4 <97, AM4*0.8, IF( F4 >=97, AM4*1.1, IF( F4=" ";" "; AM4)))
View 5 Replies
View Related
Jul 28, 2014
My workbook is for financial planning but I'm attempting to streamline an input page (name, birthdate, etc) that will be referenced throughout the entire workbook to trigger automatic calculations (present value, education calculations, etc).
The cell in the input page is a birthdate - which when populated will trigger a cell on a different worksheet to calculate the respective age using this formula:
Code:
=IF(MONTH(TODAY())>MONTH('Input Page'!B30),YEAR(TODAY())-YEAR('Input Page'!B30), IF(AND(MONTH(TODAY())=MONTH('Input Page'!B30),DAY(TODAY())>=DAY('Input Page'!B30)),
YEAR(TODAY())-YEAR('Input Page'!B30),(YEAR(TODAY())-YEAR('Input Page'!B30))-1))
The problem is if there is nothing written in the birthdate cell then the age cell will automatically calculate 114 (reference photo below). Ideally I'd like that cell to be blank if nothing is in the birthdate cell on the input worksheet. I'm assuming since I'm using an IF formula to calculate the age already then I'll need to use a macro to to an "ignore".
[URL] ...........
View 2 Replies
View Related
Jan 7, 2013
If the value of the adjacent cell in column A is blank, insert a blank row through Column B:J.
View 9 Replies
View Related
Apr 3, 2014
in one column of my spreadsheet and it is returning the correct concatenation for the appropriate lines. However, I wish to have the column's cells return an answer of blank (" ") if B15, B16... etc is blank. In other words, at the moment, a correct answer would read something like '1810sd0000' C10 and B15 used, while an incorrect answer would still display '1810', but I want it to be a blank cell.
View 8 Replies
View Related
Feb 4, 2009
using a formula to copy a cell A1. if A1 is blank, i need forumula result in blank instead 0...is it possible..
View 9 Replies
View Related
Jul 11, 2007
I have checked archives, some similiar but not quite what I want.
In code below I want the output instead of going offset one column to right in same row to go one column to right into the next blank cell.
View 9 Replies
View Related
Nov 19, 2013
I have made a table which contains 2 date columns, Both formatted as date (dd-mmm-yy), the second column is calculated as the first column, + 30, The dates work out fine when adding to a date in the first columns, but from a blank cell it displays 30-Jan-00.
e.g
Started
Finishes
12-Nov-13
12-Dec-13
30-Jan-00
09-Nov-13
09-Dec-13
11-Nov-13
11-Dec-13
Rather than delete the rows with the blanks in the Started column, is there a formula that I can use so that the cells in the "Finishes" column is left blank when the "Started" cells are blank?
The current formula for cells in the "Finished" column is:
=[@Started]+30
View 2 Replies
View Related
Sep 26, 2008
Make a cell blank if another cell is blank? This is my formula, it checks two dates. It is in cell M5.
View 4 Replies
View Related
Feb 17, 2014
I'm using this formula
=IF(AND($C$54="C",C3="C"),"C1",IF(C3=$C$54,1,0))
Where C3 compares with C54, I want to have a blank cell if C3 is blank.
View 4 Replies
View Related
Jan 7, 2014
Ok, basically C3 is a dollar amount. The default total for C3 is $0.00. If C3 is $0.00 then this formula cell will display a blank cell. If there is any other amount in C3 then the formula C3-C2 will run.
I tried this but it's not working:
=IF(C3="0","",C3-C2)
View 2 Replies
View Related
Jun 1, 2014
i need a code that moves down a column and for every empty cell in the column the cell to the left is cleared and then it moves on to the next cell down. the column is not always the same and will start from a selected cell, and the column will contain no more than 5 rows
View 3 Replies
View Related
Jul 8, 2014
I am wanting to have certain cells of data from one worksheet appear on another worksheet once the cells on the first sheet have data entered in them.
I find that I can do a simple formula to copy the cell but I want the cell to remain blank until data is added in the first sheet (it will be a mix of text and numerical entries).
View 4 Replies
View Related
Jan 14, 2013
I need a macro to find the last cell in the column, then copy the formula to the next blank cell. Then, it goes back to the last cell (above) and paste's values. Then, go to the next column and repeat the process. I can do this but have to call each cell separatly...however, I would like to do it in a loop to simplify things. It would be great to even be able to just set the start and ending columns. Here is my current code:
Dim rng As Range, aCell As Range
Set rng = Range("C8, D8, E8, F8, G8, H8, J8, K8, L8, M8, N8, O8, P8, Q8, R8, S8, T8, U8")
For Each aCell In rng
Selection.End(xlDown).Select
Application.CutCopyMode = False
[Code] .......
It does not go to the next column, instead it stays in the same column and repeats the process.
View 8 Replies
View Related
Apr 1, 2014
I am trying to alert our purchasing mgr when order dates are approaching or not meeting our project deadline.
As of now i have the following rulesif order date is due today or past due - redif order date it greater than project date - redif order date is due within 2wks - yellow
Now all I need is a rule where there is an order without a due date but the project deadline is within 2wks (yellow) and past due or due today (red)
KO_04.01.14.xlsx
View 3 Replies
View Related
Mar 24, 2014
I want to get the text inside the cell which is to the left of the first blank cell of a column.
I show the problema in the attach imageSin tÃtulo.jpg
View 6 Replies
View Related
Oct 22, 2009
The below code is what I have and it works but what I need is for it to loop until it doesn't delete anything. How can this be done?
View 2 Replies
View Related
Feb 26, 2008
I am using a IF(ISNA(Vlookup##,##,##)),"",(Vlookup##,##,##)) function, in order to remove N/A errors.
Is there anyway to convert the "" values to back to an empty cell without anything in it (i.e not text "", but empty as it was originally). I find that the file sizes are very large, when using this function, as data (although blank) is stored in each cell (i know this, because if I use cntr+arrow, it sees it as data, and not an empty area). I don't want to manually go through each cell and delete them as there is quite a bit of data (10000 rows , 2 columns, 30 tabs)
View 5 Replies
View Related
Nov 26, 2013
I have 2 worksheets, let's call them "Sheet1" and "sheet2".
Sheet 1 has 2 columns (A, and B)
Ie. "Sheet1:"
Col A, Col B
Red
Green Yes
Blue
Yellow
Orange Yes
For each entry in Column "B" that has a "Yes" value, I need to copy the color value in column "A" into the next available empty cell in "Sheet2" in column A.
"Sheet2"
Col A, Col B
Red 3
Blue 5
Yellow 6
Final Result:
Col A, Col B
Red 3
Blue 5
Yellow 6
Green
Orange
how to do this particular challenge? For Sheet2, I think I'll need a function to determine the first available blank cell in column A.
View 8 Replies
View Related
Dec 24, 2013
I have a formula in cel B1 : =SUM(A2:A100) / A1
I would like to use this formula many times in the sheet, so I would need a reference to the cell the formula is in, and have the SUM range until the next empty cell one column to the left.
So I would need something like (literally):
=SUM(Offset activecell (1,-1) : Offset activecell (1, (look for next empty cell -1)) / Offset activecell (0,-1)
View 3 Replies
View Related
