ListBox2 (right) is a copy of ListBox1 (left), yet when I populate ListBox1 I get dotted lines separating each item (Photo #1.)
When I populate ListBox2 it comes out clean (Photo #2.)
what I might need to change so that ListBox1 does not have the dotted lines around each item?
Scrolling up and down w/ListBox1 will remove some of the dotted lines.
I'm working on a worksheet that another person started. For some reason there are dotted gray lines around every single cell in the print area in the print preview (no idea what this person did or who this person is, so I can't ask them). Anyhow, I need to get rid of these dotted gray lines. Clicking on no borders does not work.
View 9 Replies View RelatedI cannot find this information anywhere else in this forum...
Does anybody know how to transfer an item from one list box to another using code, on the click of a button.
The list box with the information in is called 'Team_ListBox'The list box i am wanting to transfer to is called 'Starting_Team_ListBox'The button to do this task is called 'AddPlayer_team_Btn'
I have three listboxes and I set each of their row sources from code in UserForm_Initialize() event like so:
With Sheet1
lbxLanguages.RowSource = . Range("C2", .Range("C2").End(xlDown)).Address
End With
When I run the form, sometimes I see data in two of the three listboxes and the third has blank/empty rows; sometimes all three listboxes have only empty rows in them (i.e. correct number of checkbox squares displayed but no data in front of the squares).
I have a report with ~44,000 line items. From this report, I need assistance generating a report that lists all unique line items. I am having problems trying to identify which line items are duplicates as I need to compare 4 different cells in each line to other lines to determine if it is a duplicate item (compare data from columns A, B, E, F)
For example, raw data may be as follows:
Column A………Column B…….Column E…………….....Column F
10/13/2008…….11111111…….71879W561000……….888.88
10/13/2008…….22222222…….239103302000………..222.22
10/13/2008…….11111111…….71879W561000……….888.88
10/13/2008…….33333333…….353496508000………..333.33
10/13/2008…….44444444…….239103302000………..444.44
10/13/2008…….11111111…….71879W561000……….888.88
10/13/2008 ……11111111…….353496508000………..888.88............................
Note from above, there are two occurrences of a duplicate item. As a result, the output table would only list this item once.
I have attached a sample of the spreadsheet with dummy data on one tab and the desired output on another tab. Note that all the data is broken up into blocks of data that is separated by data that is only in the first column of the row.
I am currently using the following code to populate two list boxes (lbUnitList, and lbPOList) on a userform:
How can I get the items in the lbUnitList to show in alphabetical order based on the data in Column 1?
I have a Listbox with a varying number of items in the list.
90% of the time the user will select all the items in the list.
Is there a way to have all the items preselected?
Then the remaining 10% can unselect.
How can I move an item in a Listbox up or down. This is how the listbox is populated:
Code:
Private Sub UserForm_Initialize()
Dim lbtarget As MSForms.ListBox
Dim rngSource As Range
[Code].....
I have 2 list boxes on a from with data in each list. I've been able to get items to move from listbox1 to listbox2, but I want the item to be deleted from listbox1 once it's moved...and vice versa. Here is the code I'm using. .
Private Sub DeleteButton_Click()
If ListBox2.ListIndex = -1 Then Exit Sub
If Not cbDuplicates Then
[Code]....
I'm trying to create a module that will take selections from an activeX Listbox on a Sheet called Setup and transfer them to another sheet called Lists. On the Lists sheet, I want to store the selected items in cell L2 and down. So for example, if there were 4 items selected from the Listbox, cells L2:L5 would be populated with those values.
View 1 Replies View RelatedI can't seem to get my listbox to deselect an item. When the user clicks on a day of the week in the listbox, they are given a yes/no option to print the sheets for the day selected. If they select no and change their mind, they cannot click on the same day of the week without first cancelling the listbox and re-opening it.
Private Sub UserForm_Initialize()
Dim myarray As Variant
myarray = Split("Monday|Tuesday|Wednesday|Thursday|Friday|Saturday|Sunday", "|")
ListBox1.List = myarray
End Sub
Private Sub ListBox1_Click()
Call PrintRoutine(ListBox1.Value)
End Sub....................
I have a list of items across 4 rows. It is a single select, not a multi-select list.
Row 1 is a Unique ID (1 to nth), Row 2 is a description, Row 3 is a Number Value for one requirement and Row 4 is a number value for another requirement. I have a listbox which captures the range and displays the data in a multi-column format. I want the user to have the ability to move records up or down in the order. I know you can do this for individual items in a colum using list index, but list index does not like to capture rows.
I've got two listboxes
Listbox1 has
A
B
C
D
E
Listbox2 has
1
2
3
4
5
6
7
8
9
10
If someone clicks "A" in listbox1, I want to select "1" & "4" in listbox2.
If someone clicks "B" in listbox1, I want to select "2" & "3" in listbox2.
etc.
I can get this to display in my listbox however when I add a new line to the range it won't refresh the list unless I reload the form it is on. I am also looking to see if it is possible to sort a list when it is displayed in this fashion.
[Code] ....
I have a Listbox1 in which I was able to populate it with unique items (from column B in Programs worksheet) using a collection (that was a good achievement for me!)
Now, I want to populate a the Listbox2 with items (not repeated) from column C, BUT only if the correspondent value on column B is equal to listbox1.value.
[Code] .....
I have a (MultiSelect) ListBox1 that is populated with Customer Names for the user to select from. I want the user to be able to hit the CommandButton1 adjacent to the ListBox1, and the selected Customers copy into/get added to the ListBox2.
I have the following code, adapted from other code, but it is not working:
[Code] ........
I have a userform and on this userform i populate a listbox with values.
What i want to know is how do i extract ALL the items in the listbox.......not just the ones that are "selected".
Why is it when i try adding items to my listbox it comes up with the error Permission Denied. Im using rowsource just to have a heading tho when i want to add items it come up with the error.
Note my headings are in "K2:M3"
Eg.
With Me.ListBox1
.ColumnHeads = True
.RowSource = "K3:M3"
End With
then i try adding an item with
me.listbox1.additem Test
i get the permission denied error.
I have 10 checkboxes,
When the checkbox is checked, add the cell next to it to t a listbox in another sheet. (in the sample, the result ,must appear in sheet "relatorio", inside the yellow cells)
When the checkbox is unchecked , remove that item from the listbox.
I have 8 car models in column A of sheet1 and I have a list box control with every car model on sheet 1 as well. I would like code to select all the models from column a in the list box with code.
View 2 Replies View RelatedCode:
Dim flag As Boolean
Private Sub UserForm_Initialize()
Dim myWorksheet As Worksheet
flag = True
[Code] ........
I made a user form that, with the click of an item in the listbox (which is populated with the worksheet names), will show or hide the matching worksheet. I was using indices, but a problem occurs when there are some hidden sheets to begin with, because the listbox is filled with only the visible worksheets (that's part of the functionality required) and so, when there are hidden worksheets the indices of the listbox are totally different. So, to avoid that kind of bugs I thought I'd use the sheet + listbox names to show/hide the worksheets, but that is proving to be a very hard task.
How I can use the listbox item names + worksheet names to make the "mapping" correctly?
I have created a listbox 'listbox1' and I wish to add some data to it based upon a customer number appearing in cell "D30"
In my spreadsheet, I have another hidden sheet called 'log', and, based upon matches of the customer number in column A (there could be multiple matches) I want to display all of the matching data in my listbox. Please could someone help me out with some code?
The columns I would want to bring into my listbox would be columns A,C,K and L
How to select pivot items in a pivot field based on choices from a MULTICOLUMN listbox?
At present, all I know is how to deselect pivot field values
Range("A5").Select
With ActiveSheet.PivotTables("PivotTable4").PivotFields("MONTH")
.PivotItems("MAY").Visible = False
Because the pivot table automatically starts with all items selected?
I am trying to copy multiple items from a listbox.
I have a listbox which populates with all the email addresses in my global address list.
From this I select email addresses which move to another listbox.
I then want to copy these selected email addresses to a spreadsheet when I hit a button.
I can get it to copy the 1st one but that is it.
I know this will be very simple to do but I just can't think what it is.
I have a listbox with several items selected. Is there a way to automatically show the selected items in the worksheet (as values in cells)?
View 8 Replies View RelatedWhat I am trying to do is for example Sheet 1 has a range of names A1:A20 and on sheet 2 on non contigious ranges some values from the range on Sheet 1 shown here and there. What I would like is on a form ListBox1 shows all names used in Sheet2 and on ListBox2 all names that were not used.
View 4 Replies View RelatedI'm running reports in one workbook on different types of spend for 12 business units using 1 worksheet containing the raw data, and 6 other sheets with pivot tables showing different levels of detail.
I've used simple VBA to prepare to standardise the raw data and refresh all the pivot tables with no problem
I need to filter the data to show spend for specific business units. I'd like to do this using a listbox showing the units where I can select the unit(s) to report on, which in turn will only make the units selected visible on each table in the workbookwith no other intervention.
There is another thread on here (showthread.php?t=55041) that shows how to use the list box to control 1 pivot table on one sheet but I can't find anything which shows me how extend this to cover multiple tables over multiple sheets.
I am confronting a problem with a ListBox that displays Item by the selection of a ComboBox in the same Userform.
All works like this in the column “A” from my data sheet I have a list of names and in the column J I have a list of years.
What my UserForm1 dose is to select the year column with the ComboBox and display in the ListBox the corresponding name from this year selection. Until there all work fine.
Now I have to display in the TextBoxes form the Userform2 all data form my (data sheet) and this dose not work properly.
What happens is that when I select and Item in my listBox.Userform1, Usrform2 kind of display Items from another person.
I will also attach an example on this thread for a better view of my problem.
I am trying to take selected items from a listbox and put the selected items into an array. Basically I am trying to put the selected items into a variable that I can pass to other modules. I am close but something is off. I can't tell if it's the variable declaration or the code.
I get Run Time error 91. Object variable or with block variable not set
Here's what I have so far...
[Code] ......
How to get a listbox to populate from a database sheet the code I am using to do this is posted here and it works great. My problem is now I want to get the Listbox1 results to populate my UserForm5 textboxes from the row selected in the ListBox1 of Userform4, but I am getting the error "variable not defined" and the "rw" gets highlighted. as seen in the code below it.
UserForm4 portion of the code that does the search of the sheet that holds the data
Code:
Private Sub CommandButton1_Click()
Dim sFindText As String, sFirstAddr As String
Dim i As Long, lFindCol As Long, lCol As Long, lRow As Long
Dim rMyData As Range, rMySearchField As Range, cFound As Range
Dim vArray() As Variant
[Code] ......
Userform5 issue is this rw in red doesn't seam to be right
Code:
Private Sub UserForm_Initialize()
TextBox1.Value = SrcWks.Range(UserForm4.ListBox1.List(rw, 0)).Offset(0, 0) '
TextBox2.Value = SrcWks.Range(UserForm4.ListBox1.List(rw, 0)).Offset(0, 1) '
TextBox3.Value = SrcWks.Range(UserForm4.ListBox1.List(rw, 0)).Offset(0, 2)
TextBox5.Value = SrcWks.Range(UserForm4.ListBox1.List(rw, 0)).Offset(0, 3)
[Code] .........