What I am trying to do is for example Sheet 1 has a range of names A1:A20 and on sheet 2 on non contigious ranges some values from the range on Sheet 1 shown here and there. What I would like is on a form ListBox1 shows all names used in Sheet2 and on ListBox2 all names that were not used.
View 4 Replies
Below is the code to look in a specified sheet and find the values in the row where the combobox value is found. These values that populate into the Listbox when a Combobox value has been selected, are in the same row as the Combobox value, but offset 20 - 29 columns.
All is good in this section of code.
The Listbox has 3 coulumns. It is populated as follows:
1st column is the header in Row 1 of the the columns
2nd column is the actual numerical values(minus another value offset 80 columns) in the combobox specified row, and
3rd column is the actual numerical value address in the combobox row.
Code:
Private Sub ComboBox1_Click()
Application.ScreenUpdating = False
If Me.ComboBox1.Value <> "" Then
Me.ListBox1.Clear
' On Error Resume Next
[Code] .......
The next code runs thwn the user double clicks a Listbox value. It basically enters the Combobox value and Listbox value to a sheet. All is good here, with the exception to placing the Listbox item address to the specified sheet cell.
For some reason i ALWAYS obtain the LAST possible address of the range of values (i = 20 - 29), instead of the actual item selected in the listbox.
Code:
Private Sub ListBox1_DblClick(ByVal Cancel As MSForms.ReturnBoolean)
With Sheets("DESPATCH")
.Activate
ActiveCell.Value = Me.ComboBox1.Value
[Code] .......
How to rectify this to obtain the correct listbox address ?
i have several listbox with two columns in a userform in a sheet i have several columns whith values and i'm trying to put the values from the columns in the respective listbox. down is the code i wrote but is stressing with column command
Private Sub UserForm_Initialize()
Dim contar, j, i As Double
Sheets("Historico").Select
contar = 0
For j = 1 To 15
linha = j
For i = 3 To 65536
I am trying to insert a listbox by the way of data validation and would
like
to only have unique data displayed in it. I was wondering if anybody
has done this before or if it is possible. I would like it to remove
any and all records that are blank.
This is what I have got so far.................
VBA Function UniqueItems(ArrayIn, Optional Count As Variant) As Variant
' Accepts an array or range as input
' If Count = True or is missing, the function returns the number
' of unique elements
' If Count = False, the function returns a variant array of unique
' elements
Next i
AddItem:
' If not in list, add the item to unique list
If Not FoundMatch Then
NumUnique = NumUnique + 1
ReDim Preserve Unique(NumUnique)
Unique(NumUnique) = Element
End If
Next Element
' Assign a value to the function
If Count Then UniqueItems = NumUnique Else UniqueItems = Unique
End Function
Then I input an array with a few duplicate Item and us the function to
determine the list. So far I found that it worked for the following
function:
{=TRANSPOSE(UniqueItems(A4:A27))}
but this only gives me the number of unique items in the array. The
problem is when I try to use the following function:
{=TRANSPOSE(UniqueItems(A3:A26,FALSE))}
This now only returns a zero and if I fill down they all are zero.
I would like to get a list of unique items from this formula. Example
list would be:
{Array = Lorem, Lorem, foo, bar, bar} {Formula_returns = Lorem, foo,
bar}
I haven't a clue how to display this in a regular excel cell box so I
thought that using a validation list box would inherently work.
I have a userform where I can select multiple items in a listbox and add them to another. I also have the ability to filter the first listbox to make finding items easier. The issue I am having concerns the clear filter button. As currently designed, the clear filter button will reset the initial listbox back to its default values. Ideally, I would like it to reset to the default values excluding those values that currently in the second listbox.
The entire code is below for reference, but it's the sub ClearFilter_Click that I am struggling with.
[Code] ....
I cannot find this information anywhere else in this forum...
Does anybody know how to transfer an item from one list box to another using code, on the click of a button.
The list box with the information in is called 'Team_ListBox'The list box i am wanting to transfer to is called 'Starting_Team_ListBox'The button to do this task is called 'AddPlayer_team_Btn'
I have two buttons with macros attached. One button inserts a new wave line and everytime a wave is inserted, the number of that wave follows on. I have another button which inserts a new store line. There can be multiple stores per wave. What I want now is another button which when clicked would bring up a listbox of all the waves so that I could select a wave to delete. Once I deleted a wave I want the waves which are left to re number themselves so that they aren't out of order. This would have to also delete each store which was underneath that particular wave.
View 8 Replies View RelatedI've got an interactive chart on a sheet where users select a chart from a combo box control and a picture link to the chart is displayed. The actual charts are on a hidden sheet. I have to activate the charts first for it to work so I put a button the sheet and recorded a macro where I unhide the hidden sheet, select each chart as I scroll down the screen by clicking on it then hide the sheet again and return to the interactive chart.
My problem is that I'm getting an error when the macro tries to select the first chart which is called "Chart 6":
Run-time error '-2147024809 (80070057)':
The item with the specified name wasn't found
I recorded the macro so I'm not sure why the macro isn't working now.
Code:
Sub ResetCharts()
'
' ResetCharts Macro
' Reset all charts
'
'
Sheets("Budget v Actual Graphs").Select
Sheets("Graph BG").Visible = True
ActiveSheet.ChartObjects("Chart 6").Activate
ActiveChart.ChartArea.Select
ActiveWindow.SmallScroll Down:=15
ActiveSheet.ChartObjects("Chart 35").Activate
[Code] ............
I have a list of data that includes employee ID number in column A and a certain document that they have on file (onboarding docs such as I-9, W-4, copy of Social Security card, etc.) in column B. If one employee has 10 documents, they are listed with the same ID number 10 times in A1:A10 and the different document names are listed in B1:B10.
I want to clearly see which employee has which document by having the ID numbers going vertically in column A and then an X or check mark of some sort going across the rows.
The set up of what I would like filled in is in the sheet called "status" and the list of documents on file is in the sheet called "docs."check file.xlsx
I tried a combination of an IF and VLOOKUP with a MATCH function but I wasn't getting what I wanted.
on one sheet we have a summary of the main list, which includes totals of money recieved, totals of all the different sources (ie, where they heard about us from), the totals of the frequencies they pay (ie, how many donate monthly, quarterly...) ... etc. on the next sheet we have the "main" list of donors, their IDs, amounts, frequency, source ...
the totals on the first sheet are updated manually, but i want to change that as there are a great number of errors.
I am currently using the following code to populate two list boxes (lbUnitList, and lbPOList) on a userform:
How can I get the items in the lbUnitList to show in alphabetical order based on the data in Column 1?
I have a Listbox with a varying number of items in the list.
90% of the time the user will select all the items in the list.
Is there a way to have all the items preselected?
Then the remaining 10% can unselect.
How can I move an item in a Listbox up or down. This is how the listbox is populated:
Code:
Private Sub UserForm_Initialize()
Dim lbtarget As MSForms.ListBox
Dim rngSource As Range
[Code].....
I have 2 list boxes on a from with data in each list. I've been able to get items to move from listbox1 to listbox2, but I want the item to be deleted from listbox1 once it's moved...and vice versa. Here is the code I'm using. .
Private Sub DeleteButton_Click()
If ListBox2.ListIndex = -1 Then Exit Sub
If Not cbDuplicates Then
[Code]....
I'm trying to create a module that will take selections from an activeX Listbox on a Sheet called Setup and transfer them to another sheet called Lists. On the Lists sheet, I want to store the selected items in cell L2 and down. So for example, if there were 4 items selected from the Listbox, cells L2:L5 would be populated with those values.
View 1 Replies View RelatedI can't seem to get my listbox to deselect an item. When the user clicks on a day of the week in the listbox, they are given a yes/no option to print the sheets for the day selected. If they select no and change their mind, they cannot click on the same day of the week without first cancelling the listbox and re-opening it.
Private Sub UserForm_Initialize()
Dim myarray As Variant
myarray = Split("Monday|Tuesday|Wednesday|Thursday|Friday|Saturday|Sunday", "|")
ListBox1.List = myarray
End Sub
Private Sub ListBox1_Click()
Call PrintRoutine(ListBox1.Value)
End Sub....................
I have a list of items across 4 rows. It is a single select, not a multi-select list.
Row 1 is a Unique ID (1 to nth), Row 2 is a description, Row 3 is a Number Value for one requirement and Row 4 is a number value for another requirement. I have a listbox which captures the range and displays the data in a multi-column format. I want the user to have the ability to move records up or down in the order. I know you can do this for individual items in a colum using list index, but list index does not like to capture rows.
I have a spreadsheet containing a list of key fob numbers, key numbers, etc. I have 3 userforms with different for different options, i.e. Key fob no. search, key number search, room number search. I have set up the code for each of the userforms to search for the information entered in the textbox and then lists the info in the listbox which I can then click on the one of the listed items to take me directly to the place in the spreadsheet.
However since there are a range of different key numbers per key fob, I would like to know what code I can use to allow a range of information such as the key number and room number, etc to be displayed in the same listbox as the Key fob number i searched for.
Here is my code for one of the Userforms:
Option Explicit
Sub Locate(Name As String, Data As Range)
Dim rngFind As Range
Dim strFirstFind As String
With Sheet1.UsedRange
Set rngFind = .Find(Name, LookIn:=xlValues, lookat:=xlPart)
If Not rngFind Is Nothing Then
strFirstFind = rngFind.Address
Do
I cannot attach a example of my form since the site seems to have a limit on the size of the upload and my part of the file compressed in zip format is still at 168kb.
I've got two listboxes
Listbox1 has
A
B
C
D
E
Listbox2 has
1
2
3
4
5
6
7
8
9
10
If someone clicks "A" in listbox1, I want to select "1" & "4" in listbox2.
If someone clicks "B" in listbox1, I want to select "2" & "3" in listbox2.
etc.
I can get this to display in my listbox however when I add a new line to the range it won't refresh the list unless I reload the form it is on. I am also looking to see if it is possible to sort a list when it is displayed in this fashion.
[Code] ....
I have a Listbox1 in which I was able to populate it with unique items (from column B in Programs worksheet) using a collection (that was a good achievement for me!)
Now, I want to populate a the Listbox2 with items (not repeated) from column C, BUT only if the correspondent value on column B is equal to listbox1.value.
[Code] .....
I have a (MultiSelect) ListBox1 that is populated with Customer Names for the user to select from. I want the user to be able to hit the CommandButton1 adjacent to the ListBox1, and the selected Customers copy into/get added to the ListBox2.
I have the following code, adapted from other code, but it is not working:
[Code] ........
I have a userform and on this userform i populate a listbox with values.
What i want to know is how do i extract ALL the items in the listbox.......not just the ones that are "selected".
Why is it when i try adding items to my listbox it comes up with the error Permission Denied. Im using rowsource just to have a heading tho when i want to add items it come up with the error.
Note my headings are in "K2:M3"
Eg.
With Me.ListBox1
.ColumnHeads = True
.RowSource = "K3:M3"
End With
then i try adding an item with
me.listbox1.additem Test
i get the permission denied error.
I have 10 checkboxes,
When the checkbox is checked, add the cell next to it to t a listbox in another sheet. (in the sample, the result ,must appear in sheet "relatorio", inside the yellow cells)
When the checkbox is unchecked , remove that item from the listbox.
I have 8 car models in column A of sheet1 and I have a list box control with every car model on sheet 1 as well. I would like code to select all the models from column a in the list box with code.
View 2 Replies View RelatedCode:
Dim flag As Boolean
Private Sub UserForm_Initialize()
Dim myWorksheet As Worksheet
flag = True
[Code] ........
I made a user form that, with the click of an item in the listbox (which is populated with the worksheet names), will show or hide the matching worksheet. I was using indices, but a problem occurs when there are some hidden sheets to begin with, because the listbox is filled with only the visible worksheets (that's part of the functionality required) and so, when there are hidden worksheets the indices of the listbox are totally different. So, to avoid that kind of bugs I thought I'd use the sheet + listbox names to show/hide the worksheets, but that is proving to be a very hard task.
How I can use the listbox item names + worksheet names to make the "mapping" correctly?
I have created a listbox 'listbox1' and I wish to add some data to it based upon a customer number appearing in cell "D30"
In my spreadsheet, I have another hidden sheet called 'log', and, based upon matches of the customer number in column A (there could be multiple matches) I want to display all of the matching data in my listbox. Please could someone help me out with some code?
The columns I would want to bring into my listbox would be columns A,C,K and L
ListBox2 (right) is a copy of ListBox1 (left), yet when I populate ListBox1 I get dotted lines separating each item (Photo #1.)
When I populate ListBox2 it comes out clean (Photo #2.)
what I might need to change so that ListBox1 does not have the dotted lines around each item?
Scrolling up and down w/ListBox1 will remove some of the dotted lines.
How to select pivot items in a pivot field based on choices from a MULTICOLUMN listbox?
At present, all I know is how to deselect pivot field values
Range("A5").Select
With ActiveSheet.PivotTables("PivotTable4").PivotFields("MONTH")
.PivotItems("MAY").Visible = False
Because the pivot table automatically starts with all items selected?
