Draw And Delete 1 Line
Mar 7, 2014
I have this Command button that switches on and draws a line. If you press it again then I need to delete that line.
If I push the button multiple times Excel keeps changing the name of the line. I have multiple lines on the same worksheet and text boxes but only this 1 line needs to be delete. I would think that theres a way to assign a permanent name to this line and delete and recreate it but...
ActiveSheet.Shapes.AddConnector(msoConnectorStraight, 319.5, 77.25, 319.5, _
245.25).Select
With Selection.ShapeRange.Line
.Visible = msoTrue
.Weight = 1.25
[Code]....
View 3 Replies
ADVERTISEMENT
Jan 22, 2010
Is it possible to add horizontal lines to a user form, like as shown in the attached image. I know about frames, but unsure how to get just one horizontal line.
View 3 Replies
View Related
Aug 14, 2013
I'm trying to use VBA to draw a border using the drawing toolbar and using the line. i need it to draw a border around a select area i hightlight.
i have attached a example below, but not sure if it will appear.
View 1 Replies
View Related
Dec 30, 2009
I have a 5-column listbox in a userform. I do not know how to make the column borders visible. If somebody can tell me, that would be great.
If not, then the next alternative would be to manually draw a line. I tried to so one, by creating a Label with a width of 1, and backcolor ot black. This works but not in front of a list box. For some reasons it cannot be brought to front/forward (order) of a listbox, I already right-clicked several times and sent tthe order to front.
Is it possible to bring it in front of a listbox?
View 9 Replies
View Related
Oct 6, 2009
Currently we have data that is plotted to a scatter plot along with an already defined line. Next, with a straight edge we attempt to draw a line parallel to the already defined line through the scatter points of data. We basically find two points that give us the best fit to the original line. What I attempted to do was calcualte the slope of the original line and then the slope of each combination of two points in the data set. I then subtracted the slopes, found the minimum difference and thought that would give me the line most parallel to the original. This doesn't seem to work. I'm at a loss, any advice?
View 8 Replies
View Related
Aug 13, 2008
Following is what I want to do:
Draw a line from the center of the first cell to the center of another cell.
View 3 Replies
View Related
Apr 8, 2008
I have a spreadsheet where there is a white line that is over a row line. No matter what I do I cannot seem to delete it.
I zoom in but I cannot select it.
I change the border of the cells and it will not disappear.
I am completely lost as to what else it could be, no doubt it is a simple answer that is staring me in the face. I inherited the spreadsheet so not sure what was done in the past.
View 9 Replies
View Related
Jan 23, 2009
Need to delete the line on this worksheet and post how they did it.
View 2 Replies
View Related
Jan 13, 2010
I have 2 columns in Excel wich havn't the same amount of lines.
One colom is 65.000 lines and the other one is 64.000
I am looking for a option to delete 1 line after each 65 lines.
Is this possible?
View 6 Replies
View Related
Jun 12, 2008
How would you make a macro that would delete the line if a field in that line say for example K1:K100 had "XX" or "XXX" in it?
View 10 Replies
View Related
Mar 4, 2013
I have seen so many examples online but none of them give the way to look for a value that I will input on a pop box.
In other words the macro will ask user for what value to look for. Once input then macro will run and delete row if value found if value is not found then return error and stop macro.
View 9 Replies
View Related
Sep 9, 2013
For example, on cell A1 I have 123456 Total, how do I delete the word "Total"? I have abut 2000 lines. What formula do I use?
View 5 Replies
View Related
Nov 20, 2008
Let's say I have the following file which is imported via a macro which comes from a txt file. [Apologies it's 7mb zip file] http://www.fileden.com/files/2007/8/...mpNotFixed.zip
The way the txt file is that two rows make up one row, but SAP spits the data out into two rows. Now there are specific things that I need from these tabs. The way i can get this data is to perform sort by descending on the tabs. When you sort by a descending you get the data that i need [at the second half of the worksheet]:
Basically what I want to know when i create a macro, how can i get it do delete all the rows above a specific row. In the attached file, go to DataImport2.
I would like a macro to find the word "English" in column C and then delete all the row's above it. I cannot record this because it copy's the specific cells, which i do not need. DataImport3 is how the data comes out, All i do is sort by descending ... and i need help as stated above to delete all unnecessary data.
View 3 Replies
View Related
Jun 19, 2007
I use the Append command to write a line to a text file. I have about 3 excel files appending data to the same text file.
If someone were to write a line in error I would like to have the ability to delete it.
View 3 Replies
View Related
Jan 29, 2014
I have a text document with 1000 lines. All the lines are in this format
important< %#$ other words
other important thing < %Z$different words
some important text < $# some other words
I want to know if is such a excel filter that will delete all the characters starting from "<" until the end of the line.
So, the output of this 1000 lines will look something like this:
important
other important thing
some important text
View 4 Replies
View Related
Jan 16, 2010
How do I write a macro that will delete every other line on a spreadsheet? I can create a macro that delete one line using the Record a macro command but what do I ad at the end of the macro to keep it going until stopped with Ctrl Break?
View 13 Replies
View Related
Feb 6, 2014
I manage an monthly inventory spreadsheet with over 100 various items in the master list. However in any single month there may be only 5 or 10 active items that need to be reported on. How do I develop a macro that will check the "items on hand" column and delete the entire row if the quantity is "0". My report is limited to showing only items on hand and not the entire list of items.
View 1 Replies
View Related
Dec 10, 2013
On this chart, I don't want to display the steep line segment between the first and second datapoints. I only want to display the datapoints. I also want to not display the segment of the label associated with this segment.
View 3 Replies
View Related
May 15, 2014
I have 2 lists of codes with values tied to them, columns A & B, and columns C & D. Column A is a list of the codes in use, and column C is every code possible, I need to line up the codes and shorten column C to match column A, while retaining the value that is tied to each code so that I can compare Columns B & D easily.
View 2 Replies
View Related
Jan 7, 2010
I have a worksheet in whichs Column A Cells , there is corresponding string content in Col. Z. Some cells of column Z contain of many lines (up to 100 line) which i want to reduce to one. I want to select one line through double clicking in the listbox of the userform and all other lines should be deleted and only the clicked one should remain. Code should then jump to the next non empty Z cell.
Columns B, C, D, E, F, G and H should also be shown in the userform and they should be live editable. I have attached and example file with userform and example data.
View 10 Replies
View Related
Apr 24, 2014
I'm trying to create a macro that will look at each worksheet in a workbook and then delete the last line of data on each worksheet. The last row can vary on each worksheet. This is what I have come up with but it is not working. I am on Excel 2010 and Windows 7.
Sub Macro1()
Macro1 Macro
Dim ws As Worksheet
[Code]....
View 2 Replies
View Related
Dec 3, 2009
i want to make a cup draw, but i don't want to use RAND, I want to use VBA.
What i want is to make a English Football League Cup, so all 92 leagues teams are in it, but as follows
First Round 72 teams
Second Round 50 Teams
Third Round 32 Teams
Fourth Round 16 Teams
Quarter-Finals 8 Teams
Semi-Final 4 Teams
Final 2 Teams
for a team list see attached excel spreadsheet
If you are not sure what i mean google search English League Cup or try soccerway
I want a command box or similar for each round, i dont want it to change unless i click on the command button again.
i will be inputing the scores myself.
Sorry i forget one team in the First round "Darlington"
View 14 Replies
View Related
Dec 1, 2008
I was looking for some code to randomly generate a number for a prize draw I am doing. I found a great piece on this site, which I have slightly changed to give me what I have below.
It works great except for one thing I cannot work out, I have the code below working on cell "C1", I would like it to work in cell "C5", but I can't seem to work this out.
Sub SlotsNum()
Dim w As Long, x As String, y As Long
Randomize
x = Format(Int((Range("B2") - Range("B1") + 1) * Rnd + Range("B1")), "0000")
For y = 1 To 1
For w = 1 To 250
Range("C" & y) = Int(8000 * Rnd)
Next w
Range("C" & y) = CInt(Mid(x, y, 4))
Next y
End Sub
Also, whilst here. i will have one other problem, with it being a prize draw I do not want to draw the same number twice. At the moment I have a small macro that copies the winning name that appears on the main screen (via a vlookup) onto a winners spreadsheet. I am thinking of then creating another macro that replaces the winning name on the master list with an "Already Won" entry, so we can just select again.
View 9 Replies
View Related
Apr 4, 2009
Ive been trying to draw a circle in excel, although it only draws ovals - Is there a way to draw a circle in excel?
View 9 Replies
View Related
Nov 28, 2009
I'm creating a spreadsheet regarding football teams and want to lis thte combinations of results for each team.
Specifically, if the team will win or draw.
So, I have 6 teams, each team can either win or draw.
I want to display the combinations of team 1 winning AND team 2 winning AND team 3 winning etc.
View 9 Replies
View Related
Dec 18, 2012
i have faced a problem i want to draw straight connector using code imagine when you select straight connector to draw line mouse cursor changes when you move it to a node i want to do this with excel vba code without going to shapes and selecting connector.
View 5 Replies
View Related
Jun 9, 2009
a macro that will delete a line if the message #N/A appears. Right now I have a macro that will hide a row if it has a zero in it and it loops all the way till it hits "done" would like to add the ability to delete a row with #N/A in it, here is my code for the hide zero macro
View 9 Replies
View Related
Nov 12, 2013
I have attached a very simple example of what I am trying to achieve.So we have 2 sheets. a sheet called data and a sheet called results.
the data sheet, includes ID's of employees and what they are measured on - Hours and Accounts Finished.For example, worker 123 put in 100 hours from the 200 expected and finished 100 accounts from the 200 expected. The main sheet called Results looks up in a list every ID and displays in a table the compensation the worker got. Each time you select from the drop list a different ID number it shows the result and the amount of money they got.
I want to be able to draw every worker and display the compensation they got('Results', H11) in the Pay amount column('Data',H3:H11).
View 6 Replies
View Related
Sep 30, 2009
Since I did not know how to do this I used the record macro cheating option.
Excel spit out this chunck of
View 6 Replies
View Related
Nov 22, 2006
I have a worksheet set up as a draw sheet for a tournament. I have a set of rankings showing all points collated from last tournament. What i want to do is set up a formula/macro so that a cell containing a player eg. the winner will be found on the ranking list and the points won will be added to the next cell on the ranking list.
View 14 Replies
View Related
