I manage an monthly inventory spreadsheet with over 100 various items in the master list. However in any single month there may be only 5 or 10 active items that need to be reported on. How do I develop a macro that will check the "items on hand" column and delete the entire row if the quantity is "0". My report is limited to showing only items on hand and not the entire list of items.
View 1 Replies
I created the following macro by recording the macro and going through the steps manually, however I need to make some changes and can't seem to accomplish what I'm trying to do.
The Macro opens a master inventory file, creates a new line, and then links certain column cells in the inventory to corresponding places within the original form (the macro is executed from the original form once it's completed).
Problem is, the macro is written using the form "template" so whenever I save the template as the name of the unique item, it won't update the macro language as well.
What I'm trying to accomplish is when someone opens the template, the save immediately with a different file name, and once the form is completed and the macro is run, it's creating the new line in the inventory pointing to that specific file.
I thought somehow utilizing ThisWorkbook within the macro instead of explicitly using something like
"='[Control Sheets (JOHN TEST).xls]FUND SET_UP PG_1'!R2C3" would accomplish what I'm trying to do.
Can I make my inventory item to a barcode and easily to be scanned, should I make it in Excel? Word? And how?
View 5 Replies View RelatedYou can find attached the workbook I am working on.
In my workbook I have four sheets. Only two sheets are relevant in this case: "Sheet1" and "List". On "Sheet1" there in column A there is big range of codenumbers (highlighted with red).
On the "List" worksheet I have a smaller list (highlighted with green).
I have a code also in module1 but the code is not working.
I would like my macro to do the following. Check the code number from the "List" worksheet (green) and search for it in "Sheet1" column A (red). If this codnumber can be found in column A then leave the number on the green list. If it cannot be found in column A then, delete it from the green list. If you open the file, you can see on the "List" worksheet that there are three code numbers in the green range. The upper and the bottom code number can be found on the "Sheet1" column A (red) range, but the middle number cannot be found. So if the macro would work correctly then it would delete the middle number, and leave the other two untouched!
I have an excel form with a command (submit) button that opens up Outlook when clicked. I am looking for a way to have this submit button disappear when the user selects a specific item in a drop down list to make sure they do not email the form when it is used for a promotion (Promotion would be selected in the drop down).
View 8 Replies View RelatedHow do I write a macro that will delete every other line on a spreadsheet? I can create a macro that delete one line using the Record a macro command but what do I ad at the end of the macro to keep it going until stopped with Ctrl Break?
View 13 Replies View RelatedI'm trying to create a macro that will look at each worksheet in a workbook and then delete the last line of data on each worksheet. The last row can vary on each worksheet. This is what I have come up with but it is not working. I am on Excel 2010 and Windows 7.
Sub Macro1()
Macro1 Macro
Dim ws As Worksheet
[Code]....
Looking to perform a search on a folder of all files containing a string; example: Item#. Would like the vb application to return the following for each entry found:
FileName, DateLastModified, [Entire Line] the character string was found on.
Brass Solution: Search Excel files only
Silver Solution: Search Excel and Word files
Gold Solution: Search Excel, Word, and .PDF files
I have a list of 20 cities in K1:20 and they can be selected from a drop down menu in column A2:A22. I want then to randomly pick 6 out of 20 and these 6 cities must to appear in a line A1, B1, C1, D1, F1, and G1
On cell A1 I have used the
IF ( A2=K1,K1, IF(A3=K1,K1...................A22=K1,K1,IF(A2=K2,K2......A22=K3,K3)
It seem to be an endless formula is there another way to make it easy ???
I have an Excel file with text records, 1000s of lines long Trancriptions of Customer sales reps and Customers, or Distributors. All data is in Collum A.
Each Record has 7-10 Entries
______________________
BILLNUM : 060501
ORIG : 12345678909090
REP : 45672222222222
AREA : LK787878000000
SD : 060401
ED : 062025
COMMENT : CUSOMTER CONVERVERSATION WITH REP
C:HELLO
R:HELLO
C:MAY I HELP YOU
R:BALANCE PLEASE
etc......................
How do I print multiple inventory labels based on our inventory levels?
For example:
Item No 1000
Descr Window
Customer Taylor
PO 9001
Quantity 10
Item No 1010
Descr Door
Customer Jones
PO 9011
Quantity 35
I want to print 10 labels with the info from Item No 1000 and 35 labels from Item No 1010????
a macro that will delete a line if the message #N/A appears. Right now I have a macro that will hide a row if it has a zero in it and it loops all the way till it hits "done" would like to add the ability to delete a row with #N/A in it, here is my code for the hide zero macro
View 9 Replies View RelatedI had been trying really hard to get some solution on COGS valuation & inventory valuation on FIFO basis. my daily transactions are typical sales & purchases.
Attached is the inventory in/out movement from Quick Books. in the column "Num" type bill is the entry from purchase bill whihc always has a reference as P/O####. This is how i will capture the landed cost against a PO., another type "Inv Adj" is inter warehouse transfer. Name is cusotmer, Inventory is my item number. in some cases it is like "2000", in some cases it is 10000:10121, and in some cases it is 10000:10200:10201 that is why they fall in different columns when i export them.
What I would lilke to do: 1) Run a report by month, by customer showing cost of goods sold on FIFO basis, I can capture sales amount by running another report.
I am not an excel whiz, so I will need layman's terms if possible. I may have found a solution to my problem under another thread, but I couldn't understand it. I have only briefly worked with macros, a very long time ago. Here goes...
I have an inventory list that has not been updated for sales of the inventory, only for purchases. I have sales lists, generally by month, in separate spreadsheets. I am looking for a simple, efficient way of either eliminating or at least matching up the data in the sales list to the inventory list in order to remove sold items from inventory (on paper). I am hoping the result will be a fairly accurate inventory list, and related value, so that a physical inventory count won't be necessary at this time. Obviously I could copy all of the sales info into one spreadsheet, sort by inventory number, then manually delete all sold items from the inventory listing. I am REALLY hoping there is a better option.
I have a worksheet that I need to be able to easily copy and paste the formula/formatting from the row above, but not the Values entered, (if any). I am using columns A to DG.
I just really need to be able to copy all the formula in these cells down - nothing exciting or fancy.
I've tried formatting as a table as per some searches and that was difficult! My column headings changed, and when I inserted a row, two of the formula's wouldn't copy down - plus the shading and borders went wonky in places.
i hv following code
(i use generate macro)
my question is how to arrange the code from one line to multiple like :-
following code show in excel macro environment is one striaght line.
' Create new var on yr , and replace 2006 to CY06.
ActiveCell.FormulaR1C1 = _
I have a Excel Charts (waterfall graph) which has let us say 10 items in the rows. the first one represents the intial and the last one represents finish. If I want to delete one item in between the first and last, the finish item vanishes. For example I have the following series and I want to delete item G from it. The Finish item vanishes from the graph
Intial200
A100100
B7030
C9020
D5040
G4020
Finish30
I wunder if it is in any way possible to delete an item if you drag it outside the boundries of the listbox
View 2 Replies View RelatedI have a spreadsheet where there is a white line that is over a row line. No matter what I do I cannot seem to delete it.
I zoom in but I cannot select it.
I change the border of the cells and it will not disappear.
I am completely lost as to what else it could be, no doubt it is a simple answer that is staring me in the face. I inherited the spreadsheet so not sure what was done in the past.
I have a workbook. The second tab is inventory numbers and the first tab has my inventory items. I scan in the inventory number (unique) and it adds it to my inventory sheet. As I use inventory I scan the barcode and it inputs the serial number into my used inventory tab. What I need to do it when I scan the serial number for used inventory into the used inventory sheet to have it go to the inventory sheet and delete the line for that serial number.
View 9 Replies View RelatedAny way to use a search form I've created to delete data from the original sheet. What I'm doing here is using advanced filter to copy data from the original database onto a temporary sheet to display in this list box. I've gotten almost everything to work properly, but since this is populated by advanced filter, I don't really even know where to start on my delete button.
Code:
Private Sub Search()
Dim Criteria As Range
Dim SearchRange As Range
Dim SearchResults As Range
Set Criteria = Range("Values!Criteria")
[Code] ......
So I was thinking something like this:
Code:
Private Sub cmdDelete_Click()
lstResults.Value.delete
End Sub
But I know this won't work.
I have a combobox which is manually scrolled through using the down arrow key. As the different combobox items are viewed, I would like to be able to delete the currently viewed item from the list if desired by clicking on a commandbutton.
The list items are contained in the range of B2:B500. Also, since this places a gap in the list, I would like to shift the remaining cells values in column B up to close the gap.
I am trying to create a Macro that will let me copy and paste the Inventory with the Corresponding SKU on a different spreadsheet, I have attached the Spreadsheet, Sheet 1 is the Missing Quantities and Sheet 2 has the updated Quantities that will need to be identified by SKU from Sheet 1 to Sheet 2.
View 1 Replies View RelatedNeed to delete the line on this worksheet and post how they did it.
View 2 Replies View RelatedI have 2 columns in Excel wich havn't the same amount of lines.
One colom is 65.000 lines and the other one is 64.000
I am looking for a option to delete 1 line after each 65 lines.
Is this possible?
How would you make a macro that would delete the line if a field in that line say for example K1:K100 had "XX" or "XXX" in it?
View 10 Replies View RelatedI have seen so many examples online but none of them give the way to look for a value that I will input on a pop box.
In other words the macro will ask user for what value to look for. Once input then macro will run and delete row if value found if value is not found then return error and stop macro.
I have this Command button that switches on and draws a line. If you press it again then I need to delete that line.
If I push the button multiple times Excel keeps changing the name of the line. I have multiple lines on the same worksheet and text boxes but only this 1 line needs to be delete. I would think that theres a way to assign a permanent name to this line and delete and recreate it but...
ActiveSheet.Shapes.AddConnector(msoConnectorStraight, 319.5, 77.25, 319.5, _
245.25).Select
With Selection.ShapeRange.Line
.Visible = msoTrue
.Weight = 1.25
[Code]....
For example, on cell A1 I have 123456 Total, how do I delete the word "Total"? I have abut 2000 lines. What formula do I use?
View 5 Replies View RelatedLet's say I have the following file which is imported via a macro which comes from a txt file. [Apologies it's 7mb zip file] http://www.fileden.com/files/2007/8/...mpNotFixed.zip
The way the txt file is that two rows make up one row, but SAP spits the data out into two rows. Now there are specific things that I need from these tabs. The way i can get this data is to perform sort by descending on the tabs. When you sort by a descending you get the data that i need [at the second half of the worksheet]:
Basically what I want to know when i create a macro, how can i get it do delete all the rows above a specific row. In the attached file, go to DataImport2.
I would like a macro to find the word "English" in column C and then delete all the row's above it. I cannot record this because it copy's the specific cells, which i do not need. DataImport3 is how the data comes out, All i do is sort by descending ... and i need help as stated above to delete all unnecessary data.
