In a Multipage form, the first page contains 2 DTPickers. These show the date value from the specified excel worksheet cells and update the cells accordingly if the user changes the dates with the TDPicker. These work perfectly.
If I place another DTPicker control on another page of the Multipage though, it leads to a run-time error.
As an example, the code for 1 of the successful DTPickers on the first page:
Private Sub DTPickerAccountsStartDate_CallbackKeyDown(ByVal KeyCode As Integer, ByVal Shift As Integer, ByVal CallbackField As String, CallbackDate As Date)
End Sub
Private Sub UserForm_Initialize()
Application. ScreenUpdating = False
ActiveWorkbook.Sheets("Cover").Activate
DTPickerAccountsStartDate.Value = Format(Range("B6").Value, "dd/MM/yyyy")
End Sub
There are no errors in any of the cell references etc and the formatting of the DTPicker controls is exactly the same in all cases.
I have a DTPicker on a multipage form on a userform with the following codes:
sheet1. range("Ac2").value=DTPicker1.value
DTPicker1.value=sheet1.range("AC2").value
The first line of code is in the DTPicker1_change event.
The second line of code is in the userform_initialize event.
This works fine if I move the DTPicker control onto the userform itself, but if I put the control on the multipage form it fails with the following message: Run Time Error 35788
An error occurred in a call to the Windows date & time picker control.
My datepicker automatically defaults to the date when it was first set up. I would like it to always show the current date when the user form is first opened...
i implement DTPicker inside a userform in my pc ... but when i open the userform in other pc there's an error saying could not found DTPicker ... when i reopen it in the pc that i've made the userform the DTPicker is no longer there and i had to redo the same thing over and over again when others opens it in other pc.
In a userform I have 6 DTPlcker controls for 3 periods (from...to... X3). The dates chosen are not saved unfortunately and once I exit and retrieve the file again all the dates in the 6 DTpickers get the date of today.
I'm having a problem with a form where I have created several DatePicker controls. Once the user select the control and select a date, it's saved on a cell (all the data is stored as a record, including dates). However, the user could not select a date, and, in this case, I should record nothing on that cell. What I have done is to enable the checkbox property.. so I assumed that the date is valid if this checkbox is checked (however, I don't know how to validate if this checkbox is checked or not). The checkbox property for the date picker is a yes/no value that just show the control as enabled/disabled whether you check or not that checkbox.
Question I have is: How can I do to see if I should be saving a date or not on the cell? I have tried different formulas without success. Sometime works and sometime no. I'm using the following code to validate if the user has selected a date:
If IsNull(DTPicker18.Value) = False Then Worksheets("DAT").Cells(nPubRow, 37).Value = DTPicker18.Value Else ' If the user deselected the checkbox I should delete the cell content... Worksheets("DAT").Cells(nPubRow, 37).Delete End If
What happens is that sometimes this condition returns True.. but others it returns a 0:0:00 value that is not null.
I am creating a bar inventory/"numbers" sheet for a corporation. I have been searching on and off for a week or so to find an answer or a tutorial on what I am looking to implement into this worksheet. I want to take a userform, with a multipage control, and have the control for each tab, show me a different part of the worksheets. For instance, the first tab would be inventory, the second tab would be ordering, the third tab would be weekly numbers, etc ... I am wondering how to "add ranges to the multipage control in order to make it a "viewer". I have found tutorials on how to print, enter info into the form and save it to the sheets using a button, but I can't find a tutorial on how to implement the control on how to make tabs show the ranges. Can someone point me in the right direction on a tutorial, or maybe if willing a small spreadsheet with a mulitpage control on it, showing how to add the ranges from different worksheets?
I'm having a problem setting the multipage tab on a userform in VB. It's kinda weird because the code was working fine until recently, where it's suddenly stopped working properly! The only thing I can think of is that I changed versions of Excel to v2003 recently.
I want to not let the user change tabs unless the inputs entered have been error checked. My code is:
Private Sub MultiPage1_Change()
If Me.MultiPage1.Value > 1 Then If Range("inputs!dob") = "" Then Me.MultiPage1.Value = 1 MsgBox ("Please enter your date of birth before continuing.") End If End If End Sub The tab itself changes fine (ie. shows the tab 1 header), but the contents of the tab are actually the contents of tab 2!
I have had some succcess with Userforms, but I have now tried creating multipage ones.
I assumed that when I clicked on page 2 or page 3 of the multipage control, it would take me to a blank canvas, but instead it just replicates what is on Page 1. If I put textboxes and labels on page one, it repeats them on pages 2 and 3. If I delete boxes fropm page 3, they also disapear from 1 and 2!
So im unsure how to put different labels etc onto different pages.
When I drop a multipage control onto a worksheet, the control defaults to showing/having 2 pages. I looked at the various properties and there doesn't seem to be a way to change/add to that number of pages. I know I can add pages to the control programmatically. But what if I don't want to do it that way? What if I want to set the control to show 3 pages instead of 2 at design time? Is there a way to do that?
I'm trying to create a next button from one user form to another. But I can't reach there. I know that I have to use, multi page, but I don't know how!
The tabstrip and multipage object curiously resemble one another, in that they both have tabs, and hence naturally arouses one's curiosity and raises this question.
I searched this forum, and found one thread, from several years ago, where some senior members shrugged and said they had never used it. I found little in google, after an hour of searching, except for a Microsoft example which I completed and attached here.
I still have questions in my mind about exactly when and how one might use a multistrip, but this example helps me a lot, so I felt it might help others as well.
I am anxious to hear your tips and caveats about multistrips.
A multistrip appears to be a handy way document related options for the programmatic alteration of the functionality of some aspect of an application, such as color, or font, or perhaps output device.
Is there anyway to make the number of multipages you have respond to a previous fill in the Userform? Let's say you have a textbox asking for number of requests, if you type 4, there will be 4 multipages with the same fills.
UserForm1, page5. From Combobox1 I choose a city and the textboxes give me the values from Sheet3. I'd like to color in green the smallest value. for example, if for LHR I find for A-4214, B-4420, C-3127 => value 3127 to be green. The problem is I have more textboxes in other pages and some of them are colored in green also. Is possible to reffer to these textboxes from page5 only?
If i have a form with a multipage of 2 pages on it and on each of the pages i have a button and a text box, is it possible to have each of the arrangement linked to the enter key.
eg button 1 to textbox 1 when i hit enter on page 1 button 2 to textbox 2 when i hit enter on page 2
I am trying to get a scrollbar on a MultiPage UserForm to provide instant results on the active spreadsheet. The spreadsheet is full of charts, and as you move the scrollbar, the charts change. Trouble is, the code I have is VERY slow. Moving the scollbar turns the cursor into an hourglass and that little scrollbar graphic lags about a centimeter behind. Is there faster code out there?
Here is what I have:
NOTE I use both the change event and the Scroll event because using only one gives me only half the functionality of the scrollbar...that is, without both, either the arrows on the scrollbar work or only the slider works.
I'm using a multipage control on a form that has the style set to fmTabStyleButtons. So it uses buttons instead of tabs. I named one of my buttons (tabs) to Close. Can I set this up to where just pressing the Close button will cause it to exit the app not just go to that page?
I cannot make a correct variables syntax for MyMulti and sRngC.
How to make a correct syntax for this
Dim pa As Integer Dim MyMulti As String
Sub MyMulti(iRow1 As Long, iCol1 As Long, iRow2 As Long, iCol2 As Long, _ iRow3 As Long, iCol3 As Long)
For pa = 1 To 7 Next pa
MyMulti = multi & pa
Dim sRngA As String Dim sRngB As String Dim sRngC As String sRngA = Cells(iRow1, iCol1).Address & ":" & Cells(iRow2, iCol2).Address sRngB = Cells(iRow3, iCol3).Address sRngC = Page & pa
If Not ActiveCell.Formula = "=OR(All!" & sRngA & "=TRUE)" Then Me.MultiPage1.sRngC.Visible = Range(sRngB).Value Else Me.MultiPage1.sRngC.Visible = ActiveCell.Formula = "=OR(All!" & sRngA & "=TRUE)" End If
I need to create a multipage with tabs running down the left hand side. I cannot use the normal horizontal multipage control because this would result in an impossibly wide page. Is there a vertical multipage control? I could not find one? Or a way to convert the multipage control to show vertical tabs?
Please bare in mind that this vertical multipage will be shown in a form that already includes a normal horizontal multipage (I am using multipages within multipages too!).
I'm trying to find out how to hide just the tab headers on a multipage object. I see alot of posts on the forum that say how to hide the entire page, but I just want the tabs (headers) invisible.
I have a userform with a multipage consisting of 4 tabs.
Each one has several combobox's and 1 commandbutton.
As you move through the form the commandbutton moves the data to my worksheet then moves you to the next page. When it reaches the last page it will return you to the first page then unload the form which is great.
The problem I am having is the cursor is not in any of the boxes on the first page. If I click on one of the other tabs then return to first page the first combobox has the focus. All the tab orders are correct. Can anyone point me in the right direction.
Private Sub cmdNext3_Click() ActiveWorkbook.Sheets("CarDetails").Activate Range("A1").Select Do If IsEmpty(ActiveCell) = False Then ActiveCell.Offset(1, 0).Select End If
Does anyone knows a simple way to insert a table on a MultiPage UserForm ?
This MultiPage appears on a excel spreadsheet when the user click on a button. I would like to put a table on one of the pages such that the user can fill in this table.
i am trying to make the multipage form so that page 2 ,3 is password protected intially the form will open read only, with access to subsequent pages through a password.
I know you don't usually print userforms & when you do I know the code, however, how can you print one page of a multipage userform when the page has a vertical scrollbar & you want to print the whole page, not just what is showing on screen?
I have a UserForm which has a multipage with 2 pages, each page has many controls and associated code. I now need to add a third page but cannot get the code supplied to work.
VB: Sub AddNewPage() Dim NewPage As Page Set NewPage = frmColEd.mpCust.Pages.Add(, , 2) NewPage.Caption = ThisWorkbook.Sheets(2).Text frmColEd.Show End Sub
frmColEd is the name of the user form and mpCust the name of the multipage on that user form. I keep getting a 'Type Mismatch' on the SetNewPage=.... line no matter how I change it.
