I have a multipage (say "Multipage1") in a userform. It has five different pages in it starting from page1 to page5.
When the userform is opened, I want to have a control as to which page is being displayed first.
eg: I want the page2 to be displayed when the userform is being opened.
I cannot make a correct variables syntax for MyMulti and sRngC.
How to make a correct syntax for this
Dim pa As Integer
Dim MyMulti As String
Sub MyMulti(iRow1 As Long, iCol1 As Long, iRow2 As Long, iCol2 As Long, _
iRow3 As Long, iCol3 As Long)
For pa = 1 To 7
Next pa
MyMulti = multi & pa
Dim sRngA As String
Dim sRngB As String
Dim sRngC As String
sRngA = Cells(iRow1, iCol1).Address & ":" & Cells(iRow2, iCol2).Address
sRngB = Cells(iRow3, iCol3).Address
sRngC = Page & pa
If Not ActiveCell.Formula = "=OR(All!" & sRngA & "=TRUE)" Then
Me.MultiPage1.sRngC.Visible = Range(sRngB).Value
Else
Me.MultiPage1.sRngC.Visible = ActiveCell.Formula = "=OR(All!" & sRngA & "=TRUE)"
End If
End Sub
sRngC should be Page1, Page2, etc.
I have a UserForm which has a multipage with 2 pages, each page has many controls and associated code. I now need to add a third page but cannot get the code supplied to work.
VB:
Sub AddNewPage() Dim NewPage As Page Set NewPage = frmColEd.mpCust.Pages.Add(, , 2) NewPage.Caption = ThisWorkbook.Sheets(2).Text frmColEd.Show End Sub
frmColEd is the name of the user form and mpCust the name of the multipage on that user form. I keep getting a 'Type Mismatch' on the SetNewPage=.... line no matter how I change it.
I have the following code in a module that works fine for referencing a textbox on a page of a multipage on a userform, but I'm stumped trying to figure out how to reference the page object itself vs the multipage then referencing the page later. My code is:
Code:
Dim a As MultiPage
Set a = UserForm1.MultiPage1
a.Page2.P2_ScoreTotal.Value = (Val(a.Page2.P2_Q1_Score.Text) +
[Code]....
I have a userform1 with multipage 1 which has 5 pages. Is it possible to select page 1 from a label on page 5. I have the following code assigned to label 18 on Page 5 but I can't get to Page 1. In fact, the code does absolutely nothing.
Private Sub Label18_Click()
MultiPage1.Value = 0
End Sub
I have a UserForm with a MultiPage form on it. Page1 is a totals page with 3 TextBoxes. Page 2 and counting are item pages. Each page also has 3 TextBoxes (nutrients for that item).
Purpose is to add all of the values in the first TextBox on pages 2 + and place the total into the first TextBox on page 1. Repeat this for the other two TextBoxes.
The problem is that I have no way of knowing how many pages I will need!
Is there a way to add a new page to the MultiPage and copy all of the formatting and controls from the formerly last page on to it? I would like to do this with an "Add" button.
How can I tell (in code) which is the current tab selected on a MultiPage?
View 6 Replies View RelatedI have a MultiPage User Form, it has 2 tabs within the User Form.
I want to display Tab #1 (the first tab) as the 'visible/active' Tab for the user upon opening the user form. How do I do that?
Usually, I would open a User Form with frmMyForm.Show in a private module, to show the form. But now I have 2 Tabs, and want to select a certain Tab upon opening it?
When I view a sheet under Page Break Preview, it shows the Page numbers in the centre of the Page. While I am aware that it would not print the page number I was wondering if there is an option to remove/hide the page numbers.
View 3 Replies View RelatedI have some code that parses an html table. I want to put in error handling in case the format of the page changes or the internet page is unavailable. I am testing without an internet connection and the run time error is not being branched off to the error handler and is fatally ending the macro. This is true also if I raise an error manually.
Private Sub ParseInjuryPage()
On Error Goto ErrorHandl
Dim strPage As String
Dim webIE As SHDocVw.InternetExplorer
Dim myURL As String
Dim tableBeg As Long
Dim tableEnd As Long
Dim RowBeg As Long
Dim rowEnd As Long
Dim cellBeg As Long
Dim cellEnd As Long
Dim strBeg As Long
Dim strEnd As Long
Dim myCell As Range
Dim rowNum As Integer
With Sheets("INJ")
Set myCell = .Range("A2")
.Range("A:F").Value = vbNullString
rowNum = 2
Set webIE = New SHDocVw.InternetExplorer
myURL = "http://www.sportsline.com/nfl/injuries"
webIE.Navigate myURL
Do Until webIE.ReadyState = READYSTATE_COMPLETE
DoEvents
Loop
strPage = webIE.Document.body.innerhtml...................................
I suddenly can't adjust my page breaks in any Excel spreadsheet while in Page Break Preview. Is there some option to turn it on and off?
View 7 Replies View RelatedI have a sheet that changes the number of columns based on data from other sheets. This is the only sheet in the workbook that I will print out every day. I have it set right now to fit all columns on one page, however sometimes this will result in the bottom 1/3rd of the sheet not being used. If I use fit all rows on one page, then some of the columns will get cut off. Is there a way to scale in both directions? My guess is there is not, but I thought I would ask because it would work great for me if I could.
View 4 Replies View RelatedI have a report that I use and right now I have a command button that prints the report x2. What I would like to do is to have it print one in color and one in grayscale. I could do this I think with two different buttons, but I would like to utilize just one. I tried creating a macro but it did not pick up the fact that I changed the properties to black and white.
View 2 Replies View RelatedI am looking for a formula that will take data from one page and graph it on another page. The data I am trying to graph is arranged like so:
A B
1 q 2009.05.01
2 w 2009.05.02
3 w 2009.05.01
4 q 2009.05.01
I am looking for something that will look at column A and if the answer is "q" and then look at column B and if the answer is "2009.05.01" Excel will take that and count it in a specific cell on another page. In the case above, I want Excel to give me the answer of "2" in a designated cell.
Is it possible to Change Start Page Of Multi Page UserForm Based on 8 CommandButtons. on a WorkSheet, for example.
CommandButton1
UserForm1.MultiPage1.Value = 0
CommandButton2
UserForm1.MultiPage1.Value = 1
CommandButton3
UserForm1.MultiPage1.Value = 2
CommandButton4
UserForm1.MultiPage1.Value = 3
Could I use 1 multipage UserForm Instead of 8 UserFoms. Is it better to use 1 multipage UserForm with 8 pages or 8 UserForms. I dont know if this make sense or not?
I have a workbook that has 9 different tabs in it. Once all the information has been completed throughout the workbook, is there a code that could transfer specific data on each page to a different colum on that same page? I need to do this for 9 pages at one time. The information is listed differently on each page. I need to transfer data from the current data column to the previous data column once the entire workbook has been filed out.
View 2 Replies View Relatedhow to get rid of the page numbers that appear when using page break preview mode. The page numbers appear in large grey font in the middle of each page and sometimes makes it difficult to read cells. Can I use this view with all the same functionality without that one feature?
View 3 Replies View RelatedI need a macro that will print a hidden page that is linked to the page I have active.
It needs to be able to find the correct hidden page that corresponds to the active page because there are multilple pairs of the hidden/visible pages. The name of the hidden page is the same as the visible one with "printout" added to the end. When created, the sheet code names are sheetn and sheetm; n and m being consecutive numbers.
Working with 2000 Excel is bringing some new chalanges. I see things are done different. I am trying now to keep my header to repeat from page to page.
For example I have a header that may say something like:
People, numbers, date, ect. And there are so many new rows they go on for pages long. How can I keep my header on the top of each page when it prints out on paper.
Assume that calculation is set to automatic and not manual, then is every formula on a page updated when any value on the page is changed, or only when the values in the cells pertaining to a particular formula change?
For instance, if cells a1-a10 have values and in a11 is a sum a1-a10 formula, and in b1-b10 are values and a sum b1-b10 formula in b11, if I change a value in range b1-b10 but do not change any values in a1-a10,then as well as the formula in b11 updating will the formula in a11 recalculate or does excel keep track of which cells have changed and thus is aware that the formula in a11 does not need to be recalculated?
I have a dataset that is as follows:
Col1 2 3 4 ...... 45
123 456 xxx xxx xxx
100 234 xxx xxx xxx
221 543 xxx xxx xxx
112 234
112 689
122 956
122 234
This goes on from left to right for 45 odd columns.
I need to copy each set i.e set 1 is 123 down to 122 to say cell a25 and then copy the next set i.e. 456 to 234 below the first set.
I need to somehow write a loop code that knows where to get the 2nd, then 3rd set, etc and copy it to the bottom of the preceeding set
I am creating a bar inventory/"numbers" sheet for a corporation. I have been searching on and off for a week or so to find an answer or a tutorial on what I am looking to implement into this worksheet. I want to take a userform, with a multipage control, and have the control for each tab, show me a different part of the worksheets. For instance, the first tab would be inventory, the second tab would be ordering, the third tab would be weekly numbers, etc ... I am wondering how to "add ranges to the multipage control in order to make it a "viewer". I have found tutorials on how to print, enter info into the form and save it to the sheets using a button, but I can't find a tutorial on how to implement the control on how to make tabs show the ranges. Can someone point me in the right direction on a tutorial, or maybe if willing a small spreadsheet with a mulitpage control on it, showing how to add the ranges from different worksheets?
View 14 Replies View RelatedI'm having a problem setting the multipage tab on a userform in VB. It's kinda weird because the code was working fine until recently, where it's suddenly stopped working properly! The only thing I can think of is that I changed versions of Excel to v2003 recently.
I want to not let the user change tabs unless the inputs entered have been error checked. My code is:
Private Sub MultiPage1_Change()
If Me.MultiPage1.Value > 1 Then
If Range("inputs!dob") = "" Then
Me.MultiPage1.Value = 1
MsgBox ("Please enter your date of birth before continuing.")
End If
End If
End Sub
The tab itself changes fine (ie. shows the tab 1 header), but the contents of the tab are actually the contents of tab 2!
I have had some succcess with Userforms, but I have now tried creating multipage ones.
I assumed that when I clicked on page 2 or page 3 of the multipage control, it would take me to a blank canvas, but instead it just replicates what is on Page 1. If I put textboxes and labels on page one, it repeats them on pages 2 and 3. If I delete boxes fropm page 3, they also disapear from 1 and 2!
So im unsure how to put different labels etc onto different pages.
I am looking for a way to make a UserForm MultiPage control show no tabs.
Is this even possible?
Or is there another way to get this same result?
When I drop a multipage control onto a worksheet, the control defaults to showing/having 2 pages. I looked at the various properties and there doesn't seem to be a way to change/add to that number of pages. I know I can add pages to the control programmatically. But what if I don't want to do it that way? What if I want to set the control to show 3 pages instead of 2 at design time? Is there a way to do that?
View 3 Replies View RelatedCan you run a procedure when a particular page in a multipgae control is clicked rather than use the Multipage change control.
View 5 Replies View RelatedI'm trying to create a next button from one user form to another. But I can't reach there. I know that I have to use, multi page, but I don't know how!
View 4 Replies View RelatedIn a Multipage form, the first page contains 2 DTPickers. These show the date value from the specified excel worksheet cells and update the cells accordingly if the user changes the dates with the TDPicker. These work perfectly.
If I place another DTPicker control on another page of the Multipage though, it leads to a run-time error.
As an example, the code for 1 of the successful DTPickers on the first page:
Private Sub DTPickerAccountsStartDate_CallbackKeyDown(ByVal KeyCode As Integer, ByVal Shift As Integer, ByVal CallbackField As String, CallbackDate As Date)
End Sub
Private Sub UserForm_Initialize()
Application. ScreenUpdating = False
ActiveWorkbook.Sheets("Cover").Activate
DTPickerAccountsStartDate.Value = Format(Range("B6").Value, "dd/MM/yyyy")
End Sub
There are no errors in any of the cell references etc and the formatting of the DTPicker controls is exactly the same in all cases.
The tabstrip and multipage object curiously resemble one another, in that they both have tabs, and hence naturally arouses one's curiosity and raises this question.
I searched this forum, and found one thread, from several years ago, where some senior members shrugged and said they had never used it. I found little in google, after an hour of searching, except for a Microsoft example which I completed and attached here.
I still have questions in my mind about exactly when and how one might use a multistrip, but this example helps me a lot, so I felt it might help others as well.
I am anxious to hear your tips and caveats about multistrips.
A multistrip appears to be a handy way document related options for the programmatic alteration of the functionality of some aspect of an application, such as color, or font, or perhaps output device.
