I have a DTPicker on a multipage form on a userform with the following codes:
sheet1. range("Ac2").value=DTPicker1.value
DTPicker1.value=sheet1.range("AC2").value
The first line of code is in the DTPicker1_change event.
The second line of code is in the userform_initialize event.
This works fine if I move the DTPicker control onto the userform itself, but if I put the control on the multipage form it fails with the following message:
Run Time Error 35788
An error occurred in a call to the Windows date & time picker control.
In a Multipage form, the first page contains 2 DTPickers. These show the date value from the specified excel worksheet cells and update the cells accordingly if the user changes the dates with the TDPicker. These work perfectly.
If I place another DTPicker control on another page of the Multipage though, it leads to a run-time error.
As an example, the code for 1 of the successful DTPickers on the first page:
Private Sub DTPickerAccountsStartDate_CallbackKeyDown(ByVal KeyCode As Integer, ByVal Shift As Integer, ByVal CallbackField As String, CallbackDate As Date) End Sub
Private Sub UserForm_Initialize() Application. ScreenUpdating = False ActiveWorkbook.Sheets("Cover").Activate DTPickerAccountsStartDate.Value = Format(Range("B6").Value, "dd/MM/yyyy") End Sub
There are no errors in any of the cell references etc and the formatting of the DTPicker controls is exactly the same in all cases.
How do I determine which control the user is currently modifying on a multipage form (either changing, enterying or exiting the specific control). when I use "userform1.activecontrol" i get "multipage1" as the control name but I need the actual control on the specific active multipage. (also the .TABINDEX is for the multipage regardless of the on-page control) I use a generic data-field change SUBroutine so need the control name (and the TABINDEX) to provide my SELECT CASE. (so every fieldname_CHANGE calls the same SUB [with no parameters])
I'm having a problem with a form where I have created several DatePicker controls. Once the user select the control and select a date, it's saved on a cell (all the data is stored as a record, including dates). However, the user could not select a date, and, in this case, I should record nothing on that cell. What I have done is to enable the checkbox property.. so I assumed that the date is valid if this checkbox is checked (however, I don't know how to validate if this checkbox is checked or not). The checkbox property for the date picker is a yes/no value that just show the control as enabled/disabled whether you check or not that checkbox.
Question I have is: How can I do to see if I should be saving a date or not on the cell? I have tried different formulas without success. Sometime works and sometime no. I'm using the following code to validate if the user has selected a date:
If IsNull(DTPicker18.Value) = False Then Worksheets("DAT").Cells(nPubRow, 37).Value = DTPicker18.Value Else ' If the user deselected the checkbox I should delete the cell content... Worksheets("DAT").Cells(nPubRow, 37).Delete End If
What happens is that sometimes this condition returns True.. but others it returns a 0:0:00 value that is not null.
I am creating a bar inventory/"numbers" sheet for a corporation. I have been searching on and off for a week or so to find an answer or a tutorial on what I am looking to implement into this worksheet. I want to take a userform, with a multipage control, and have the control for each tab, show me a different part of the worksheets. For instance, the first tab would be inventory, the second tab would be ordering, the third tab would be weekly numbers, etc ... I am wondering how to "add ranges to the multipage control in order to make it a "viewer". I have found tutorials on how to print, enter info into the form and save it to the sheets using a button, but I can't find a tutorial on how to implement the control on how to make tabs show the ranges. Can someone point me in the right direction on a tutorial, or maybe if willing a small spreadsheet with a mulitpage control on it, showing how to add the ranges from different worksheets?
UserForm1, page5. From Combobox1 I choose a city and the textboxes give me the values from Sheet3. I'd like to color in green the smallest value. for example, if for LHR I find for A-4214, B-4420, C-3127 => value 3127 to be green. The problem is I have more textboxes in other pages and some of them are colored in green also. Is possible to reffer to these textboxes from page5 only?
I'm using a multipage control on a form that has the style set to fmTabStyleButtons. So it uses buttons instead of tabs. I named one of my buttons (tabs) to Close. Can I set this up to where just pressing the Close button will cause it to exit the app not just go to that page?
i am trying to make the multipage form so that page 2 ,3 is password protected intially the form will open read only, with access to subsequent pages through a password.
Last weeks I've had too few spare moments to answer questions, hope to pick that up soon. I have a strange problem now with some checkboxes on a multipage control.
Please see the attachment.
I want to check all the 5 boxes on a page if the box above is checked, and vice versa, uncheck them all if the box above is unchecked. I use code of Dave Hawley to loop through the checkboxes.
This doesn't work, but oddly enough, it works if I insert a MsgBox in the code.
I have a userform with a multipage issue. On page1 I have a command button that formats cells. On page2 I have textbox1 with a fixed number, textbox2 that counts the number of formatted cells (from the command button on page 1) and textbox3 that's going to sum textbox1 and 2. So here's the issue. Lets say I'm on page2 viewing the textboxes, if I switch back to page1 and format additional cells and then switch back to page2, textbox2 does not update with the additional cells formatted. I always need to close the userform and reopen it for the changes to take place.
I've started experiencing a strange problem. The control toolbox keeps appearing when the first page on a multipage userform is activated. I can't figure out what's causing this, and after searching the forum, with no luck, I thought I would see if anybody else is experiencing the same problem, and how to fix it.
I have a userform which has a number of multipage controls nested inside each. So, the parent is Multipage1 with 2 pages. Page 1 of Multipage1 has a second multipage control (Multipage2 which has 4 pages). In Multipage2, page1 there is a 3rd Multipage control (Multipage3 which has 2 pages). In Multipage2, page 2 there is another multipage control (Multipage4 which has 3 pages)...and so on! I know this sounds complicated, but I am trying to get the caption of the selected multipage.
There are commandbuttons in all of the pages, which when clicked need to return the caption name of the multipage where they sit.
I have started the following code, but suspect there must be a better solution:
VB:
With Sales If .MultiPage1.Value = 0 Then Hardware_Purchases_Input.TextBox6.Value = .MultiPage1.SelectedItem.Caption & " - " & .MultiPage2.SelectedItem.Caption & " - " & .MultiPage3.SelectedItem.Caption End If End With
I want to access the Properties of a number of controls in a running form, and these controls may or may not be contained in a Frame or a MultiPage.
In particular I want the Top and Left for these controls, which means I have to first find out if the control is contained in a Frame or MultiPage so I can get the reference for Top and Left. I'm ok with doing this for controls inside a Frame, but the MultiPage is eluding me. I get an error when I try to access these controls and it looks like they are actually owned by the individual Pages of the MultiPage.
how do I find out if a given control is contained in a given MultiPage?
Within the ComboBox properties, is there anyway to control after "enter" his hit, you move to the right instead of down (similar to the edit under Tools/Options)?
My datepicker automatically defaults to the date when it was first set up. I would like it to always show the current date when the user form is first opened...
i implement DTPicker inside a userform in my pc ... but when i open the userform in other pc there's an error saying could not found DTPicker ... when i reopen it in the pc that i've made the userform the DTPicker is no longer there and i had to redo the same thing over and over again when others opens it in other pc.
In a userform I have 6 DTPlcker controls for 3 periods (from...to... X3). The dates chosen are not saved unfortunately and once I exit and retrieve the file again all the dates in the 6 DTpickers get the date of today.
I'm trying to make a command button copy the text from a text box on a multipage control to the active cell in the sheet. I have been able to make it paste the text once it is manually selected and copied to the clipboard but that is all. I've tried recording a macro but that doesn't seem to work in the userform. I need it to copy the text from the active multipage tab (from a textbox) and paste into the sheet's active cell.
I have created a userform within VBA which has a TreeView Control and a Spreadsheet control on it.
I have populated the TreeView control with data and what I want to be able to do is to drag the nodes off the TreeView control to the spreadsheet control.
I can drag onto a normal worksheet but not onto the spreadsheet control (the no drop mouse pointer keeps showing).
I have a HUGE dataset (more than 1 million rows). I'm trying to find the optimum cell range size - 10 rows, 100 rows, 682 rows, whatever - for a SUM formula. (The formula would be in every row, looking down at the next n rows).
Is it possible to control the SUM cell range specified in a formula in cell (X) with a value in cell (Y)? In other words, the SUM formula in cell (X) would somehow refer to cell (Y) to determine the SUM cell range.
Ideally, I would like to then use Solver to find the optimal value for cell (Y).
Is this possible with just formulas? Or is VBA required?
I would like to define the range of cells in the sum with a number in another cell. Say I want to sum the past 10 years, I would like the sum definition to be controlled by another cell that includes the number 10.
If I want B1 to be the sum of A1:A10, B2 to be the sum of A2:A11, etc., I would like to be able to control the range of the sum with say, C1, which in this case would contain the number 10.
This would allow me to easily change the range of data I am summing: if I changed C2 to 15, B2 would give me the sum of A1:A15 for example.
I need to have the contents of cell A1 (a 3 component list) control a formula in cell E1. If A1 is "add", then E1 should be B1 x D1. If A1 is "delete", then E1 should be B1 x D1 x .6, and if A1 is "delete ilo", then E1 should be B1 x D1 x (-1).
A1 B1 C1 D1 E1
list qty. list price of C1 item formula needed ( lookup)
I'm having a problem setting the multipage tab on a userform in VB. It's kinda weird because the code was working fine until recently, where it's suddenly stopped working properly! The only thing I can think of is that I changed versions of Excel to v2003 recently.
I want to not let the user change tabs unless the inputs entered have been error checked. My code is:
Private Sub MultiPage1_Change()
If Me.MultiPage1.Value > 1 Then If Range("inputs!dob") = "" Then Me.MultiPage1.Value = 1 MsgBox ("Please enter your date of birth before continuing.") End If End If End Sub The tab itself changes fine (ie. shows the tab 1 header), but the contents of the tab are actually the contents of tab 2!
I have had some succcess with Userforms, but I have now tried creating multipage ones.
I assumed that when I clicked on page 2 or page 3 of the multipage control, it would take me to a blank canvas, but instead it just replicates what is on Page 1. If I put textboxes and labels on page one, it repeats them on pages 2 and 3. If I delete boxes fropm page 3, they also disapear from 1 and 2!
So im unsure how to put different labels etc onto different pages.
