Multipage Controls

May 15, 2006

Can you run a procedure when a particular page in a multipgae control is clicked rather than use the Multipage change control.

View 5 Replies


Referencing Controls On Page Of Multipage?

Jan 23, 2014

I have the following code in a module that works fine for referencing a textbox on a page of a multipage on a userform, but I'm stumped trying to figure out how to reference the page object itself vs the multipage then referencing the page later. My code is:

Dim a As MultiPage
Set a = UserForm1.MultiPage1
a.Page2.P2_ScoreTotal.Value = (Val(a.Page2.P2_Q1_Score.Text) +


View 8 Replies View Related

UserForm Controls (components Within MultiPage)

Feb 13, 2007

What I'm trying to do:

Create a "search" userform that pulls data from a spreadsheet of raw data (hardware specs) and organizes it into a multipage control. Each page of the MultiPage has a different piece of hardware with simliar data entry categories (height, weight, calibration date for example).

Each page at the moment contains labels and textboxes only. The idea is to place data from the spreadsheet into these textboxes, and create new pages as needed during runtime.

My current issues:
Just for testing/ debugging, I have a "_Change()" code that is triggered by changing pages within the Multipage. When I run the control, I trigger the change, but the textboxes and labels disappear.

I don't have much code to show, other than basic _Change() structure containing a msgbox for debugging.

This is related to a locked thread, where "imgUpdating" and "DoEvents" were referenced. I tried DoEvents, without success. I also don't know what "imgUpdating" is, but it sounds like it helped the other person with a similar issue:

UserForm Controls not displaying at runtime

View 7 Replies View Related

Validate UserForm MultiPage And Frame Controls

Dec 3, 2006

I am in the process of creating a module to validate a MulitPage UserForm that is composed of, among other controls, multiple frames, each containing a TextBox and two OptionButtons. I need to identify those frames where the TextBox value is not null and neither of the OptionButtons have been selected. The module will pass as variables the TextBox value, OptionButton captions and Frame caption to another module that will create a UserForm with the invalid Frame/TextBox/OptionButtons sets for the user to correct.

The interim code listed below runs as a command button on a test UserForm. The MsgBox displays only the first of the OptionButton’s caption as Opt1 and Opt2. Can anyone tell me why and where I went awry?

Public WithEvents As MSforms.TextBox, Opt1 As String, Opt2 As String, vtxt As Long, vFrame As String, vTag As String
Private Sub CommandButton1_Click()

Dim pPage As Page, cCont As Control, vCont As MSforms.Control
'Dim Opt1 As String, Opt2 As String, vtxt As Long, vFrame As String, vTag As String

Is there a more elegant way of accomplishing this? (Control Tags are already spoken for.)

View 4 Replies View Related

Check Mandatory Controls On MultiPage UserForm

Dec 29, 2006

I have successfully created validation code that operates as a command button. The code listed below identifies in a MultiPage UserForm non- null TextBoxes whose pair of associated OptionButtons have not been selected. (The TextBox and OptionButtons all lie within a Frame and their are 60+ sets of these throughout the UserForm.) A MessageBox alerts user to select one of the OptionButtons.

Private Sub CommandButton1_Click()
Dim cFrameT As Control
Dim cCtrlF() As Control
Dim pPage As Page
Dim cCtrl() As Control
Dim Num As Integer
Dim FNum As Integer
Dim vOpt As Boolean
Dim Opt() As String
Dim lPage As Long
Dim vFrame As String
Redim Opt(Num) As String
Redim cCtrl(FNum) As Control
Redim cCtrlF(Num) As Control

Num = 0
FNum = 0
' Loops through all Multipage pages
For lPage = 0 To Me.MultiPage1.Pages.Count - 1..............

View 2 Replies View Related

Access Control Properties Of Controls Within UserForm, MultiPage & Frame

Jan 30, 2009

I want to access the Properties of a number of controls in a running form, and these controls may or may not be contained in a Frame or a MultiPage.

In particular I want the Top and Left for these controls, which means I have to first find out if the control is contained in a Frame or MultiPage so I can get the reference for Top and Left. I'm ok with doing this for controls inside a Frame, but the MultiPage is eluding me. I get an error when I try to access these controls and it looks like they are actually owned by the individual Pages of the MultiPage.

how do I find out if a given control is contained in a given MultiPage?

Validate UserForm MultiPage and Frame Controls

View 3 Replies View Related

Multipage Control

Aug 23, 2007

I am creating a bar inventory/"numbers" sheet for a corporation. I have been searching on and off for a week or so to find an answer or a tutorial on what I am looking to implement into this worksheet. I want to take a userform, with a multipage control, and have the control for each tab, show me a different part of the worksheets. For instance, the first tab would be inventory, the second tab would be ordering, the third tab would be weekly numbers, etc ... I am wondering how to "add ranges to the multipage control in order to make it a "viewer". I have found tutorials on how to print, enter info into the form and save it to the sheets using a button, but I can't find a tutorial on how to implement the control on how to make tabs show the ranges. Can someone point me in the right direction on a tutorial, or maybe if willing a small spreadsheet with a mulitpage control on it, showing how to add the ranges from different worksheets?

View 14 Replies View Related

Multipage Tab On A Userform In VB

Apr 24, 2007

I'm having a problem setting the multipage tab on a userform in VB. It's kinda weird because the code was working fine until recently, where it's suddenly stopped working properly! The only thing I can think of is that I changed versions of Excel to v2003 recently.

I want to not let the user change tabs unless the inputs entered have been error checked. My code is:

Private Sub MultiPage1_Change()

If Me.MultiPage1.Value > 1 Then
If Range("inputs!dob") = "" Then
Me.MultiPage1.Value = 1
MsgBox ("Please enter your date of birth before continuing.")
End If
End If
End Sub
The tab itself changes fine (ie. shows the tab 1 header), but the contents of the tab are actually the contents of tab 2!

View 9 Replies View Related

Multipage On Userforms

Jun 24, 2008

I have had some succcess with Userforms, but I have now tried creating multipage ones.

I assumed that when I clicked on page 2 or page 3 of the multipage control, it would take me to a blank canvas, but instead it just replicates what is on Page 1. If I put textboxes and labels on page one, it repeats them on pages 2 and 3. If I delete boxes fropm page 3, they also disapear from 1 and 2!

So im unsure how to put different labels etc onto different pages.

View 9 Replies View Related

Multipage And Page

May 22, 2009

I have a multipage (say "Multipage1") in a userform. It has five different pages in it starting from page1 to page5.

When the userform is opened, I want to have a control as to which page is being displayed first.

eg: I want the page2 to be displayed when the userform is being opened.

View 25 Replies View Related

Tabless MultiPage

May 9, 2006

I am looking for a way to make a UserForm MultiPage control show no tabs.

Is this even possible?

Or is there another way to get this same result?

View 9 Replies View Related

Multipage: Change/add

May 13, 2006

When I drop a multipage control onto a worksheet, the control defaults to showing/having 2 pages. I looked at the various properties and there doesn't seem to be a way to change/add to that number of pages. I know I can add pages to the control programmatically. But what if I don't want to do it that way? What if I want to set the control to show 3 pages instead of 2 at design time? Is there a way to do that?

View 3 Replies View Related

Vba: Use Multipage Userform

Feb 1, 2007

I'm trying to create a next button from one user form to another. But I can't reach there. I know that I have to use, multi page, but I don't know how!

View 4 Replies View Related

Dtpicker In Multipage

Mar 7, 2007

In a Multipage form, the first page contains 2 DTPickers. These show the date value from the specified excel worksheet cells and update the cells accordingly if the user changes the dates with the TDPicker. These work perfectly.

If I place another DTPicker control on another page of the Multipage though, it leads to a run-time error.

As an example, the code for 1 of the successful DTPickers on the first page:

Private Sub DTPickerAccountsStartDate_CallbackKeyDown(ByVal KeyCode As Integer, ByVal Shift As Integer, ByVal CallbackField As String, CallbackDate As Date)
End Sub

Private Sub UserForm_Initialize()
Application. ScreenUpdating = False
DTPickerAccountsStartDate.Value = Format(Range("B6").Value, "dd/MM/yyyy")
End Sub

There are no errors in any of the cell references etc and the formatting of the DTPicker controls is exactly the same in all cases.

View 6 Replies View Related

Tabstrip Vs. Multipage

May 24, 2007

The tabstrip and multipage object curiously resemble one another, in that they both have tabs, and hence naturally arouses one's curiosity and raises this question.

I searched this forum, and found one thread, from several years ago, where some senior members shrugged and said they had never used it. I found little in google, after an hour of searching, except for a Microsoft example which I completed and attached here.

I still have questions in my mind about exactly when and how one might use a multistrip, but this example helps me a lot, so I felt it might help others as well.

I am anxious to hear your tips and caveats about multistrips.

A multistrip appears to be a handy way document related options for the programmatic alteration of the functionality of some aspect of an application, such as color, or font, or perhaps output device.

View 3 Replies View Related

Dynamic Multipage With Userform?

Jul 2, 2014

Is there anyway to make the number of multipages you have respond to a previous fill in the Userform? Let's say you have a textbox asking for number of requests, if you type 4, there will be 4 multipages with the same fills.

View 4 Replies View Related

Control Textboxes In Multipage?

Feb 15, 2014

UserForm1, page5. From Combobox1 I choose a city and the textboxes give me the values from Sheet3. I'd like to color in green the smallest value. for example, if for LHR I find for A-4214, B-4420, C-3127 => value 3127 to be green. The problem is I have more textboxes in other pages and some of them are colored in green also. Is possible to reffer to these textboxes from page5 only?

View 8 Replies View Related

Default Enter Key On A Multipage

May 9, 2009

If i have a form with a multipage of 2 pages on it and on each of the pages i have a button and a text box, is it possible to have each of the arrangement linked to the enter key.

eg button 1 to textbox 1 when i hit enter on page 1
button 2 to textbox 2 when i hit enter on page 2

View 3 Replies View Related

Scrollbar On A Multipage UserForm

Feb 23, 2010

I am trying to get a scrollbar on a MultiPage UserForm to provide instant results on the active spreadsheet. The spreadsheet is full of charts, and as you move the scrollbar, the charts change. Trouble is, the code I have is VERY slow. Moving the scollbar turns the cursor into an hourglass and that little scrollbar graphic lags about a centimeter behind. Is there faster code out there?

Here is what I have:

NOTE I use both the change event and the Scroll event because using only one gives me only half the functionality of the scrollbar...that is, without both, either the arrows on the scrollbar work or only the slider works.

View 5 Replies View Related

Multipage Control Using Tab To Exit

May 28, 2012

I'm using a multipage control on a form that has the style set to fmTabStyleButtons. So it uses buttons instead of tabs. I named one of my buttons (tabs) to Close. Can I set this up to where just pressing the Close button will cause it to exit the app not just go to that page?

View 9 Replies View Related

Variables In Sub And Multipage.Page

Apr 4, 2007

I cannot make a correct variables syntax for MyMulti and sRngC.

How to make a correct syntax for this

Dim pa As Integer
Dim MyMulti As String

Sub MyMulti(iRow1 As Long, iCol1 As Long, iRow2 As Long, iCol2 As Long, _
iRow3 As Long, iCol3 As Long)

For pa = 1 To 7
Next pa

MyMulti = multi & pa

Dim sRngA As String
Dim sRngB As String
Dim sRngC As String
sRngA = Cells(iRow1, iCol1).Address & ":" & Cells(iRow2, iCol2).Address
sRngB = Cells(iRow3, iCol3).Address
sRngC = Page & pa

If Not ActiveCell.Formula = "=OR(All!" & sRngA & "=TRUE)" Then
Me.MultiPage1.sRngC.Visible = Range(sRngB).Value
Me.MultiPage1.sRngC.Visible = ActiveCell.Formula = "=OR(All!" & sRngA & "=TRUE)"
End If

End Sub
sRngC should be Page1, Page2, etc.

View 9 Replies View Related

Multipage - Vertical Tab Version

Jun 9, 2007

I need to create a multipage with tabs running down the left hand side. I cannot use the normal horizontal multipage control because this would result in an impossibly wide page. Is there a vertical multipage control? I could not find one? Or a way to convert the multipage control to show vertical tabs?

Please bare in mind that this vertical multipage will be shown in a form that already includes a normal horizontal multipage (I am using multipages within multipages too!).

View 9 Replies View Related

Hiding Tab Headers On Multipage

May 1, 2008

I'm trying to find out how to hide just the tab headers on a multipage object. I see alot of posts on the forum that say how to hide the entire page, but I just want the tabs (headers) invisible.

View 9 Replies View Related

Open A Usefrom W/MultiPage To A Specified Tab

Jun 16, 2008

open a Usefrom that has a MultiPage and go to a specified tab using a Macro/Code?

View 9 Replies View Related

Setfocus To Combobox On Multipage

Apr 17, 2006

I have a userform with a multipage consisting of 4 tabs.

Each one has several combobox's and 1 commandbutton.

As you move through the form the commandbutton moves the data to my worksheet then moves you to the next page. When it reaches the last page it will return you to the first page then unload the form which is great.

The problem I am having is the cursor is not in any of the boxes on the first page. If I click on one of the other tabs then return to first page the first combobox has the focus. All the tab orders are correct. Can anyone point me in the right direction.

Private Sub cmdNext3_Click()
If IsEmpty(ActiveCell) = False Then
ActiveCell.Offset(1, 0).Select
End If

View 9 Replies View Related

Table On A Multipage Userform

Apr 13, 2007

Does anyone knows a simple way to insert a table on a MultiPage UserForm ?

This MultiPage appears on a excel spreadsheet when the user click on a button. I would like to put a table on one of the pages such that the user can fill in this table.

View 5 Replies View Related

Multipage Password Control

Apr 22, 2007

i am trying to make the multipage form so that page 2 ,3 is password protected intially the form will open read only, with access to subsequent pages through a password.

View 9 Replies View Related

Print Multipage Userform

May 6, 2007

I know you don't usually print userforms & when you do I know the code, however, how can you print one page of a multipage userform when the page has a vertical scrollbar & you want to print the whole page, not just what is showing on screen?

View 2 Replies View Related

Adding Page To Multipage Userform

Mar 30, 2013

I have a UserForm which has a multipage with 2 pages, each page has many controls and associated code. I now need to add a third page but cannot get the code supplied to work.

Sub AddNewPage() Dim NewPage As Page Set NewPage = frmColEd.mpCust.Pages.Add(, , 2) NewPage.Caption = ThisWorkbook.Sheets(2).Text frmColEd.Show End Sub

frmColEd is the name of the user form and mpCust the name of the multipage on that user form. I keep getting a 'Type Mismatch' on the SetNewPage=.... line no matter how I change it.

View 2 Replies View Related

Multipage Form Find Records

Feb 14, 2014

If I enter emp Id then it should search in my mastersheet and if data found then display.

If records not found then after clicking on add button.

Employee information page should activate and my cursor should be on emp id.

I have developed attached file : My Data Entry Form.xlsm‎

View 1 Replies View Related

Copyrights 2005-15, All rights reserved