Multipage Tab On A Userform In VB

Apr 24, 2007

I'm having a problem setting the multipage tab on a userform in VB. It's kinda weird because the code was working fine until recently, where it's suddenly stopped working properly! The only thing I can think of is that I changed versions of Excel to v2003 recently.

I want to not let the user change tabs unless the inputs entered have been error checked. My code is:

Private Sub MultiPage1_Change()

If Me.MultiPage1.Value > 1 Then
If Range("inputs!dob") = "" Then
Me.MultiPage1.Value = 1
MsgBox ("Please enter your date of birth before continuing.")
End If
End If
End Sub
The tab itself changes fine (ie. shows the tab 1 header), but the contents of the tab are actually the contents of tab 2!

View 9 Replies


ADVERTISEMENT

Vba: Use Multipage Userform

Feb 1, 2007

I'm trying to create a next button from one user form to another. But I can't reach there. I know that I have to use, multi page, but I don't know how!

View 4 Replies View Related

Dynamic Multipage With Userform?

Jul 2, 2014

Is there anyway to make the number of multipages you have respond to a previous fill in the Userform? Let's say you have a textbox asking for number of requests, if you type 4, there will be 4 multipages with the same fills.

View 4 Replies View Related

Scrollbar On A Multipage UserForm

Feb 23, 2010

I am trying to get a scrollbar on a MultiPage UserForm to provide instant results on the active spreadsheet. The spreadsheet is full of charts, and as you move the scrollbar, the charts change. Trouble is, the code I have is VERY slow. Moving the scollbar turns the cursor into an hourglass and that little scrollbar graphic lags about a centimeter behind. Is there faster code out there?

Here is what I have:

NOTE I use both the change event and the Scroll event because using only one gives me only half the functionality of the scrollbar...that is, without both, either the arrows on the scrollbar work or only the slider works.

View 5 Replies View Related

Table On A Multipage Userform

Apr 13, 2007

Does anyone knows a simple way to insert a table on a MultiPage UserForm ?

This MultiPage appears on a excel spreadsheet when the user click on a button. I would like to put a table on one of the pages such that the user can fill in this table.

View 5 Replies View Related

Print Multipage Userform

May 6, 2007

I know you don't usually print userforms & when you do I know the code, however, how can you print one page of a multipage userform when the page has a vertical scrollbar & you want to print the whole page, not just what is showing on screen?

View 2 Replies View Related

Adding Page To Multipage Userform

Mar 30, 2013

I have a UserForm which has a multipage with 2 pages, each page has many controls and associated code. I now need to add a third page but cannot get the code supplied to work.

VB:
Sub AddNewPage() Dim NewPage As Page Set NewPage = frmColEd.mpCust.Pages.Add(, , 2) NewPage.Caption = ThisWorkbook.Sheets(2).Text frmColEd.Show End Sub

frmColEd is the name of the user form and mpCust the name of the multipage on that user form. I keep getting a 'Type Mismatch' on the SetNewPage=.... line no matter how I change it.

View 2 Replies View Related

Next And Back Buttons In Multipage Userform

Nov 7, 2011

I have placed next and back buttons in the userform. I have a total of 8 pages.

The problem is that page 2 and 4 is not active. And I cannot see why. In the properties of the pages the data is exactly the same at all pages.

Are there errors in my code?

Code:
Private Sub cmdNext_Click()
MultiPage1.Value = MultiPage1.Value + 1
End Sub

Private Sub cmdBack_Click()
Dim intPage As Integer
intPage = MultiPage1.Value
Do

[Code] ..........

View 2 Replies View Related

Can't Switch Tab Back In Multipage Userform

Nov 17, 2011

I have two pages in the userform. What I was trying to do is that certain textbox (txtDate) needs to be entered on the page1 before going to page2. The user can still select page2 however I want the vba to bring the page back to page1 if the data is missing.

Here is the code:

Private Sub MultiPage1_Change()
If MultiPage1.Value = 1 And txtDate = "" Then
MultiPage1.Value = 0
txtDate .BackColor = &H40C0
End If

It didn't work completely - the tab selection on top was on page1 however all the controls shown are still the controls under page2. I have to manulally click page1.

I also tried MultiPage1.Page(0).Enabled=True but it didn't work either.

View 3 Replies View Related

Referencing A Textbox Within A Multipage Userform

Jan 25, 2010

The code below works when the textbox (txtExt) is not within a multipage but doesn't when it is. I'm presuming i need to reference the multipage and page number but can't seem to get the right syntax.

Private Sub txtExt_Exit(ByVal Cancel As MSForms.ReturnBoolean)
Details.Activate
Dim agExt As String
Dim extFind As Range
agExt = txtExt.Value
Data.Range("M3:M120").ClearContents
With Details

Set extFind = Range("B1")
For lCount = 1 To WorksheetFunction.CountIf(Columns(2), agExt)
Set extFind = Details.Columns(2).Find(What:=agExt, After:=extFind, LookIn:=xlValues, LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False)
With extFind...................

View 9 Replies View Related

Can A Userform Multipage Backcolor Be Changed

Mar 21, 2004

I have a multipage on a userform and wanted to change the back color. I can change this color fin for buttons and the userform itself, but I don't see the option in the properties for a multipage. And I didn't see it as an available command from vba. Am I missing something here?

View 9 Replies View Related

Multiple Textboxes: Multipage UserForm

Nov 2, 2006

re: Validating Textbox to work on a simple form.)

View 2 Replies View Related

UserForm Controls (components Within MultiPage)

Feb 13, 2007

What I'm trying to do:

Create a "search" userform that pulls data from a spreadsheet of raw data (hardware specs) and organizes it into a multipage control. Each page of the MultiPage has a different piece of hardware with simliar data entry categories (height, weight, calibration date for example).

Each page at the moment contains labels and textboxes only. The idea is to place data from the spreadsheet into these textboxes, and create new pages as needed during runtime.

My current issues:
Just for testing/ debugging, I have a "_Change()" code that is triggered by changing pages within the Multipage. When I run the control, I trigger the change, but the textboxes and labels disappear.

I don't have much code to show, other than basic _Change() structure containing a msgbox for debugging.

This is related to a locked thread, where "imgUpdating" and "DoEvents" were referenced. I tried DoEvents, without success. I also don't know what "imgUpdating" is, but it sounds like it helped the other person with a similar issue:

UserForm Controls not displaying at runtime

View 7 Replies View Related

Userform With Multipage / Insert Picture And Format It

Jul 20, 2014

I've got a table in a worksheet. Every time the user double-clicks on one of the cells containing the names for each of the listed items, a userform pops up displaying information about that item. Besides other controls, this userform has an Image Box, that displays a picture of the item, and a Multipage.

What I want to do is to display the same picture shown by the Image Box, on to the Multipage, using the same file, but, and here's the quirk, aditionally, change it's size, turn it monochrome, and set its transparency to a different value.

I've attached an example of the final look I'm seeking. This was done by prior editing of a copy of the image and inserting it using LoadPicture, but this solution is too troublesome as this is done solely for aesthetical purposes, thus not justifying all the hassle a user has to go through everytime he wishes to add a new item to the table.

View 1 Replies View Related

Control Toolbox Appearing On Multipage Userform

May 9, 2009

I've started experiencing a strange problem. The control toolbox keeps appearing when the first page on a multipage userform is activated. I can't figure out what's causing this, and after searching the forum, with no luck, I thought I would see if anybody else is experiencing the same problem, and how to fix it.

View 2 Replies View Related

Validate UserForm MultiPage And Frame Controls

Dec 3, 2006

I am in the process of creating a module to validate a MulitPage UserForm that is composed of, among other controls, multiple frames, each containing a TextBox and two OptionButtons. I need to identify those frames where the TextBox value is not null and neither of the OptionButtons have been selected. The module will pass as variables the TextBox value, OptionButton captions and Frame caption to another module that will create a UserForm with the invalid Frame/TextBox/OptionButtons sets for the user to correct.

The interim code listed below runs as a command button on a test UserForm. The MsgBox displays only the first of the OptionButton’s caption as Opt1 and Opt2. Can anyone tell me why and where I went awry?

Public WithEvents As MSforms.TextBox, Opt1 As String, Opt2 As String, vtxt As Long, vFrame As String, vTag As String
Private Sub CommandButton1_Click()

Dim pPage As Page, cCont As Control, vCont As MSforms.Control
'Dim Opt1 As String, Opt2 As String, vtxt As Long, vFrame As String, vTag As String

Is there a more elegant way of accomplishing this? (Control Tags are already spoken for.)

View 4 Replies View Related

Check Mandatory Controls On MultiPage UserForm

Dec 29, 2006

I have successfully created validation code that operates as a command button. The code listed below identifies in a MultiPage UserForm non- null TextBoxes whose pair of associated OptionButtons have not been selected. (The TextBox and OptionButtons all lie within a Frame and their are 60+ sets of these throughout the UserForm.) A MessageBox alerts user to select one of the OptionButtons.

Private Sub CommandButton1_Click()
Dim cFrameT As Control
Dim cCtrlF() As Control
Dim pPage As Page
Dim cCtrl() As Control
Dim Num As Integer
Dim FNum As Integer
Dim vOpt As Boolean
Dim Opt() As String
Dim lPage As Long
Dim vFrame As String
Redim Opt(Num) As String
Redim cCtrl(FNum) As Control
Redim cCtrlF(Num) As Control

Num = 0
FNum = 0
' Loops through all Multipage pages
For lPage = 0 To Me.MultiPage1.Pages.Count - 1..............

View 2 Replies View Related

Show Data From 2 Worksheets On Multipage Within Userform

Mar 8, 2008

I am trying to figure out how to initialise a multipage userform. I have two worksheets, one with a contact 'database', and one temp that holds search results.

I understand how to load data from the worksheet and write it back using a single useform, but this is foxing me just a tad!

View 3 Replies View Related

Return Caption Of Selected Multipage Control On Userform

Feb 4, 2014

I have a userform which has a number of multipage controls nested inside each. So, the parent is Multipage1 with 2 pages. Page 1 of Multipage1 has a second multipage control (Multipage2 which has 4 pages). In Multipage2, page1 there is a 3rd Multipage control (Multipage3 which has 2 pages). In Multipage2, page 2 there is another multipage control (Multipage4 which has 3 pages)...and so on! I know this sounds complicated, but I am trying to get the caption of the selected multipage.

There are commandbuttons in all of the pages, which when clicked need to return the caption name of the multipage where they sit.

I have started the following code, but suspect there must be a better solution:

VB:

With Sales
If .MultiPage1.Value = 0 Then
Hardware_Purchases_Input.TextBox6.Value = .MultiPage1.SelectedItem.Caption & " - " & .MultiPage2.SelectedItem.Caption & " - " & .MultiPage3.SelectedItem.Caption
End If
End With

View 3 Replies View Related

Excel 2010 :: Userform With Multipage - Populate Textbox

Jun 3, 2014

I am working on Excel 2010 and am still new at this

Attached is a UserForm with a Multipage

I have added TextBoxes to Page 1 to Page 3

Here is my problem

The Macro to show the form is not working.Also I need to populate TextBox1 with information on the "Data" sheet.

TextBox1 must show information in C3
TextBox2 must show information in C4, and
TextBox3 must show information in C2

I have tried some VB on the TextBox but it does not update, not sure if i need a command button.

View 4 Replies View Related

Spinbutton To Cyle Backwards/forwards On Multipage Userform?

Dec 8, 2008

I'm trying to create a userform to act as a walk-through for a process. I've settled on using a multipage to conserve the required screen real-estate, and break the process into natural 'stages'. I've happily got these stages fixed into the userform's pages, with a couple of command buttons running events OnClick - but cannot figure how to get the spinbutton to navigate between the pages.

View 5 Replies View Related

MultiPage Userform - How To Choose Which Page Is Visible When First Opened

Oct 22, 2012

I have a MultiPage User Form, it has 2 tabs within the User Form.

I want to display Tab #1 (the first tab) as the 'visible/active' Tab for the user upon opening the user form. How do I do that?

Usually, I would open a User Form with frmMyForm.Show in a private module, to show the form. But now I have 2 Tabs, and want to select a certain Tab upon opening it?

View 2 Replies View Related

MultiPage In UserForm Points To The Last Number Of A Named Worksheet

Dec 21, 2009

I'm using MultiPage in a UserForm

I have multiple worksheets that can range from: HOLE 1 and go up to HOLE 30

I have other multiple worksheets that can range from: SAFETY 1 and go up to SAFETY 30

When I use the Code below it always goes to the 1st worksheet named either HOLE 1 or SAFETY 1

How can I have it so that when I click on the MultiPage Tab that it goes to the last sheet on the right for each?

Example: If I'm on SAFETY 5 it would go to that sheet, and not SAFETY 1 like it does now.

Here is my
Private Sub MultiPage1_Change()
Select Case MultiPage1.Value
Case 0 'page 1
Workbooks("Workbook.xls").Sheets _
("HOLE 1").Activate
Case 1 'page 2
Workbooks("Workbook.xls").Sheets _
("SAFETY 1").Activate
End Sub

View 11 Replies View Related

Userform With Multipage: Use A ComboBox That Would Allow The User To Select The Customer

Apr 8, 2008

I wanted to create a userform with multipage. On the first page I want to use a ComboBox that would allow the user to select the customer. The customer name is on the sheet that I named "Customer" which also contains the street address/city/state/zip. What I would like is, once a customer is selected, I want a textbox that will be populated with the correct address taken from the sheet named "customer".

On the second page I'd like to use it for Product Info. I want to have a ComboBox, Text Box, a Command Buttons. The ComboBox is to select the "Model#" from the sheet named Product Info" and the TextBox is for the user to write their comments. One of the Command Button is to be view a sheet named "Quote" and the other is to send the "Quote" through email.

View 2 Replies View Related

Userform Multipage Command Button To Paste Text In Cell

Apr 8, 2009

I'm trying to make a command button copy the text from a text box on a multipage control to the active cell in the sheet. I have been able to make it paste the text once it is manually selected and copied to the clipboard but that is all. I've tried recording a macro but that doesn't seem to work in the userform. I need it to copy the text from the active multipage tab (from a textbox) and paste into the sheet's active cell.

View 9 Replies View Related

Access Control Properties Of Controls Within UserForm, MultiPage & Frame

Jan 30, 2009

I want to access the Properties of a number of controls in a running form, and these controls may or may not be contained in a Frame or a MultiPage.

In particular I want the Top and Left for these controls, which means I have to first find out if the control is contained in a Frame or MultiPage so I can get the reference for Top and Left. I'm ok with doing this for controls inside a Frame, but the MultiPage is eluding me. I get an error when I try to access these controls and it looks like they are actually owned by the individual Pages of the MultiPage.

how do I find out if a given control is contained in a given MultiPage?

Validate UserForm MultiPage and Frame Controls

View 3 Replies View Related

Send Multipage Userform Checkbox Selections To Multiple Rows Of Category

Apr 17, 2014

I have a multipage wizard like userform that for each page has check box selection choices a user can pick from. The sample I've attached uses animal attributes for 2 animals. What I'd like to have is code that populates the worksheet with the animal under consideration (determined by the Frame Caption) in say A5, then populates the attribute selections made starting in B5 with no blank rows in between if they chose not to mark a checkbox.

So for animal one on page 1 of the multipage form, if the user selected attributes 1, 3, 4, and 6 and clicked the "NEXT" button on that page, animal one appears in A5 and then those attribute selections would be in B5, B6, B7, and B8. If the user then selected for animal 2 on page 2 of the multipage form, attributes 2 and 6 and clicked the "NEXT" button on that page, then animal two would appear in A9 with the selections appearing in B9 and B10.

I should mention that the number of rows in Table 1 may grow (or shrink) row size with additional rows added (or deleted) by the user. Not sure if it matters.

View 1 Replies View Related

Multipage Control

Aug 23, 2007

I am creating a bar inventory/"numbers" sheet for a corporation. I have been searching on and off for a week or so to find an answer or a tutorial on what I am looking to implement into this worksheet. I want to take a userform, with a multipage control, and have the control for each tab, show me a different part of the worksheets. For instance, the first tab would be inventory, the second tab would be ordering, the third tab would be weekly numbers, etc ... I am wondering how to "add ranges to the multipage control in order to make it a "viewer". I have found tutorials on how to print, enter info into the form and save it to the sheets using a button, but I can't find a tutorial on how to implement the control on how to make tabs show the ranges. Can someone point me in the right direction on a tutorial, or maybe if willing a small spreadsheet with a mulitpage control on it, showing how to add the ranges from different worksheets?

View 14 Replies View Related

Multipage On Userforms

Jun 24, 2008

I have had some succcess with Userforms, but I have now tried creating multipage ones.

I assumed that when I clicked on page 2 or page 3 of the multipage control, it would take me to a blank canvas, but instead it just replicates what is on Page 1. If I put textboxes and labels on page one, it repeats them on pages 2 and 3. If I delete boxes fropm page 3, they also disapear from 1 and 2!

So im unsure how to put different labels etc onto different pages.

View 9 Replies View Related

Multipage And Page

May 22, 2009

I have a multipage (say "Multipage1") in a userform. It has five different pages in it starting from page1 to page5.

When the userform is opened, I want to have a control as to which page is being displayed first.

eg: I want the page2 to be displayed when the userform is being opened.

View 25 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved