Duplex Printing
Dec 15, 2009
I have a workbook with 4 spreadsheets, each taking 1 page to print.
I want Sheet 2 to print on the reverse side of Sheet 1 and Sheet 4 on the reverse of Sheet 3 so that all four pages of data takes 2 sheets of paper to print.
I have tried selecting 2 sheets at a time and 4 sheets at a time but printing result is always single sided even though "duplex" is selected in printer properties. In the Print dialog box I have tried selecting "Active Sheets", "Entire Workbook" and even "Selection". I've also tried specifying pages 1-4 rather than All. Eventually, by printing to a PDF creator, I have concluded that Excel is treating each tab is a separate print job. i.e. I get 4 separate PDFs.
View 9 Replies
ADVERTISEMENT
Jan 8, 2008
I am trying to use code from a Microsoft site to set the printer to duplex, but it crashes right away. "Printer" is highlighted, and the error says "variable not defined." ...
View 9 Replies
View Related
Mar 30, 2009
Is if possible to set up two different sheets in the same workbook to print as front and back pages on a duplex printer?
View 7 Replies
View Related
Jan 15, 2012
I would like to know if there is a way to print several different workbooks at once but keeping my printing format which I would like to be Landscape and Fit to one page. Reason is simple as I work in a office where staff is handed in several jobs to do everyday. They finish the jobs and log all the info on the database. I log on to database and put all their daily diaries and because it is all over the place I have to go in each file and set printing preferences which takes an hour in the morning and hour in the evening. I could do with some sort of automation where all diaries are automatically printed in Landscape and Fit on one page.
View 2 Replies
View Related
Apr 11, 2008
I have a report that is generated from a manufacturing process that looks like the example below. the report is 40 pages long when all the data is printed. i am looking for a way to only print this range if a dimension is "out of tolerance". if the dimension is within tolerance, there is always the "garbage" text of plus and minus. if every row is "within tolerance" in the range the cells in the OutTol column would all contain the "garbage" text but it will not always be identical. so, in summary, actual OutTol values = print and all "garbage" = not printed.
NomActDevLoTolUpTolOutTol
Y-0.956-0.9480.008-0.0030.0030.005
Z-1.413-1.4130.000-0.0030.003---*|++++
DIA0.4220.4240.002-0.0030.006----|+*++
POS0.0160.0110.005
View 9 Replies
View Related
Feb 12, 2007
I am automating a paper form that collects information from 7 other paper forms and then prints out the results. I have created an excel spreadsheet to do this but I am having problems getting the printed output to match the print preview.
I have inserted an image of the form into the sheet header and aligned the cells on the sheet so that the information is in the correct position when previewed in "print preview".
The problem is that, although this will print correctly on the machine I created it on, it is misaligned on any other machine I have tried.
View 9 Replies
View Related
Dec 12, 2008
I need to print quite a few mailing labels for Christmas cards from an Excel 2000 Worksheet. Could someone list the steps I must take to do this?
View 2 Replies
View Related
Oct 3, 2009
i have included an example spreadsheet, hopefully someone can help me
i want a print button that when pressed with always print 'tab 1' and will print 'tab 2 3 4 etc... if a certain cell in 'tab 1' is greater than zero
please see my example spreadsheet and hopefully my problem will become clear if ive not explained myself very well.
View 7 Replies
View Related
Dec 7, 2009
I've made a 40 page list on Excel, On the very top of this list is my titles of whats is in the collums. How do I repeat this through out, so it appears on the top of every page.
View 3 Replies
View Related
Feb 22, 2013
I have inserted checkboxes in an excel worksheet to turn on/off certain data. They are working just fine. But I have set them all to not print (by unselecting the checkbox that says "print" in the format dialogue). SOME of the checkboxes don't print, but most of them do. I can't figure out why.
I've attached the file so you can take a look.
View 3 Replies
View Related
Sep 21, 2013
How can I print 2 or more sheets on a workbook of, say, 10 sheets at once? Is there a way to do this?
View 2 Replies
View Related
Mar 11, 2014
I've noticed with a spreadsheet at work that if you print a sheet it also prints the other sheet.
The first sheet is the data and the second is a graph formed from this data.
Is there an options to set to do this or is because its a graph formed from the data sheet that it automatically prints?
View 3 Replies
View Related
May 8, 2008
I have attached a sample sheet which is for invigilation of exams. In columns D, E & F are the initials of people invigilating at different times. What I want to able to do is to print personised sheets for each person where there initals are in bold and the box has a black border around it. This is very labour intensive if I do it manually as have to highlight one person, print, unhighlight and rehighlight the next person and so on. What I was wondering is could I use a macro to automate this process. So it has a list of all the initals and it searches through and highlights the person and prints it and then moves onto the next.
View 14 Replies
View Related
Jan 6, 2009
I am using excel 2000
From this and other forums I have found and adapted 2 bits of code as follows
The code below is used to print the sheets in a workbook in reverse order eg sheet 78, sheet 77, sheet 76 etc.....
View 14 Replies
View Related
Jan 30, 2009
I have early made a macro that will change some of the cells before printing and then changing back again to initional state after the print out.
http://www.excelforum.com/excel-misc...-printing.html
But now I have to do let people also print a copy a regular way, without the macro I made before. But if they go through the regular way iof printing I would like to insert at header in red color, to notify them that this is just a preview and not the way to print. And here we come to the problem ....
View 13 Replies
View Related
Mar 20, 2009
What i have is over 20 worksheets which have information on them that i want to print when selected so, i have a "main page" with a variety of options for the user to select (by check box) and when they are happy with their selection you would click another check box to print out, i have done this because the printer is set well away from the users and if they printed of sheet by sheet then lots of miles treading back and forth to the printer room would happen so, i thought by doing it this way it would batch print all selected sheets after selection, the code is set up to print all sheets which are selected by "true" in cell O2.
This is no problem as it works well but the code also prints when the check box is de selected. What I would like is a message box to appear before the main macro runs for the user to select "yes or no" to confirm printing. I have put code in this for the command but it will not run the main magro if you select "yes"...below is the code for the main print loop...I think the code for print message should appear before this...
View 10 Replies
View Related
Oct 13, 2009
I have this attached sheet that i need to print one for every day for the next 12 months.
The problem is i can find a way of doing this and getting the cells in red in row 6 to change to the next date.
View 8 Replies
View Related
Feb 2, 2010
I need to print a worksheet. The sheet has rows of a specific height (45) and data in one cell grows - adding comments/notes with date attached so that last one entered is displayed, the rest get shoved down.
I need to sometimes print out the sheet. However, I want to have all the notes shown so would like to (1) autofit all rows, (2) print the sheet and then (3) put all rows back to row height of 45. All this I would LIKE to have done by "trapping" the print button on the normal Print area
I have attached some code, but the sheet (1) does not print at all, (2) the code is sometimes executed twice (in debug mode followed it) and (3) sometimes does not set the row height properly either at autofit or static height.
View 2 Replies
View Related
Feb 11, 2010
I have a workbook that has a print button on it. The print button macro prints many tabs on the workbook. But, on ONE of the tabs, it inserts information from a range of cells, prints, goes to the next cell in that range and prints, until complete.
The problem I'm having is this: When there is only ONE cell in that range that has information in it, it gets stuck in a continuous loop and prints a ton of blank pages.
Here's my code for this portion of the macro:
View 8 Replies
View Related
Mar 13, 2005
I have a problem I am using the following code,
Private Sub cmdPrint_Click()
frmOrders.PrintForm
End Sub
How is it possible to get the userform to be printed in landscape
View 9 Replies
View Related
Mar 24, 2006
I have a workbook that contains several macros and many formulas. It
works beautifully until I try to print or do a print preview. Then it locks
up excel and I have to restart. Any ideas about what is causing this?
View 13 Replies
View Related
Dec 8, 2004
how to print automatically from Excel to a PDF file. After a couple of days of searching and tweaking, I've got what I think is a fairly good solution for automating your printing of worksheets to PDF files.
This solution requires the use of PDF995. This is a free utility available at www.PDF995.com. This is a print driver that allows you to print to a PDF file. The file is compatible with Adobe and can be read with the Adobe reader like any other PDF. The free version does pop-up some advertising with each print, but the automation works with around the pop-ups. I believe the full license version is about $10 and doesn't produce the pop-ups.
The challenge in automating a PDF process is that the PDF driver will prompt the user for a filename. This is ok if you are printing just one sheet, but if you need to automate the production of several PDFs, you need to be able to specify the name of the file in the code. The subroutine SheetToPDF presented below allows you to specify a single worksheet and the full filename for the PDF. I've included all the code and external declarations needed. The two subs at the bottom give examples of how to call SheetToPDF with the passed parameters.
'Needed to Read INI file settings
Declare Function GetPrivateProfileString Lib "kernel32" Alias _
"GetPrivateProfileStringA" (ByVal lpApplicationName As String, _
ByVal lpKeyName As Any, ByVal lpDefault As String, _
ByVal lpReturnedString As String, ByVal nSize As Long, _
ByVal lpFileName As String) As Long
'Needed to Write INI file settings
Declare Function WritePrivateProfileString Lib "kernel32" Alias _
"WritePrivateProfileStringA" (ByVal lpApplicationName As String, _
ByVal lpKeyName As Any, ByVal lpString As Any, _...........................
View 9 Replies
View Related
Nov 28, 2006
I have a spreadsheet that the Print range is A1:E265.
I want to know if I can print this range without Column C.
View 9 Replies
View Related
Mar 25, 2007
I'm an entry level Excel user who is looking for a spread sheet to print multiple pages for tagging pallets in a warehouse. The pallets will contain the address of the customer and the number the pallet is.
Example 30 pallets would be
1 of 30 then print
2 0f 30 then print
3 of 30 then print
how I can put in a varible pallet total and have it print the all sheets up to the given number?
View 9 Replies
View Related
Jan 14, 2008
I have tried to record the steps in a macro that are involved in printing a worksheet to a PDF. It recorded everything up to and including hte printer selection. However, it did not record the filename dialog box actions and beyond.
I have Adobe Acrobat 8 and Excel 2003.
View 9 Replies
View Related
Jan 8, 2009
I have a table which I wish to print out, however I wish to print two copies of this table, one with only the rows which contain "AM" in column X, and one with the rows that contain "PM" in column X. There is also another complication in that several rows on the spreadsheet, containing data in column X, are hidden. The print range is everything between A3 & AG120.
I tried using a filter but found it unhid all the hidden rows and printed them out which I don't want.
View 9 Replies
View Related
May 24, 2009
I have a form of 1000 lines and up to Column BM wide. Instead of printing the entire 1000 lines out which equates to 22 A4 pages (and a waste). How do I get Excel (03 & 08) to check from cell W12 to Cell W1000 and find the last entry in that col, and then print only up to that row. (Any method I will be extremely grateful for)
View 9 Replies
View Related
May 29, 2009
We have a set of documents, all pdf files, residing in a network server. The shipping personnel will have a Laserjet 8150 ND (also on the network) to print the document they need at the time of shipment, for a specific product (the pdf files are actually User's Manuals for various products we sell).
We would like to create an Excel form, listing those documents, with a selection method to indicate which document is to be printed and how many copies. Then clicking on a "PRINT" button will send a command to the printer to print the desired manual.
I searched the forum threads and noticed that the subject mostly deals with printing TO pdf, whereas my need is to print pdf FROM Excel, but no such a command exists.
View 9 Replies
View Related
Dec 18, 2003
Is it possible to print a pdf file from excel ?
I am making a list with pdf files that are on my hdd. I want to be able to select them and then send them to the printer.
(Yes I know it can be easily done from within the windows explorer by selecting and right-clicking, but my excel-file has to be able to do more than that )
View 9 Replies
View Related
Oct 30, 2004
I have Adobe 6 and would like to automate the printing of Worksheets to PDFs using coding.
I want to control the location of the output i.e. specific directory. I can do this manually by selecting File...Print Select the Adobe PDF printer....go into options and deselect view PDF results. On printing I then get asked to soecify a location and all works fine....but how can I do this in code.
Unfortunately it also appears that when you restart Excel, the printer properties for the Adobe PDF printer are reset.
How can I code in the change in properties so that I can fully automise this task?
View 22 Replies
View Related
