I'm an entry level Excel user who is looking for a spread sheet to print multiple pages for tagging pallets in a warehouse. The pallets will contain the address of the customer and the number the pallet is.
Example 30 pallets would be
1 of 30 then print
2 0f 30 then print
3 of 30 then print
how I can put in a varible pallet total and have it print the all sheets up to the given number?
I would like to know if there is a way to print several different workbooks at once but keeping my printing format which I would like to be Landscape and Fit to one page. Reason is simple as I work in a office where staff is handed in several jobs to do everyday. They finish the jobs and log all the info on the database. I log on to database and put all their daily diaries and because it is all over the place I have to go in each file and set printing preferences which takes an hour in the morning and hour in the evening. I could do with some sort of automation where all diaries are automatically printed in Landscape and Fit on one page.
View 2 Replies View RelatedI have a report that is generated from a manufacturing process that looks like the example below. the report is 40 pages long when all the data is printed. i am looking for a way to only print this range if a dimension is "out of tolerance". if the dimension is within tolerance, there is always the "garbage" text of plus and minus. if every row is "within tolerance" in the range the cells in the OutTol column would all contain the "garbage" text but it will not always be identical. so, in summary, actual OutTol values = print and all "garbage" = not printed.
NomActDevLoTolUpTolOutTol
Y-0.956-0.9480.008-0.0030.0030.005
Z-1.413-1.4130.000-0.0030.003---*|++++
DIA0.4220.4240.002-0.0030.006----|+*++
POS0.0160.0110.005
I need a macro in a excel for the below scenario:
1)i have merged cells from A1:B3
2)if i click on a macro the output in the above cells should be as follows"
"Login to database"
3)if i run the same macro for the 2nd time the output should be:
"Are you done with the reporting?"
4)if i run for 3rd time the output should be:
"Logoff from database"
5)Say example if i run the same macro for 1o times i should get 10 different outputs....if i run for the 11th time the output should get repeat from 1st....
6)Output need not be in order....random also fine...
If possible gimme 2 different codes:
1)Output should be in the order wise from 1-10 and get started from1 again
2)Output should be random....
script to replace consecutive data like this:
(RX 40.1.22) (RX 40.1.23)
with this:
(RX 40.1.22-23)
I'm trying to get rid of repetitive references in a Worksheet I have. These references have "" instead of "()" but the won't show up in the post.
i want the formula to be used in excel to make acounter in another column for the values the occured repetitively
like to have these two column.
ex:
Oper No
Work Center
10 Paintsh
20 Paintsh
30 Paintsh
40 Paintsh
50 Paintsh
60
Paintsh
70 Paintsh
80 Paintsh
90 Paintsh
here the operation no is the counter for the repeated work center whose name is paint sh
I want to highlight the names that are repeated over 3 x's in any group. Example is below.
http://tinyurl.com/6gu5v6
I want to find the row position in an array.
1 200 CAR 001
2 230 CAR 002
3 400 TRUCK 001
4 200 BUS 001
5 250 CAR 003
6 250 BUS 002
7 200 BUS 003
8 730 CAR 004
in 4th column it should say that this is "n"th position of 3rd column value.
ex.
in 4th row 3rd column 1st "BUS" appears. hence column 4 is 1
in 6th row 3rd column 2nd "BUS" appears. hence column 4 is 2
in 7th row 3rd column 3rd "BUS" appears. hence column 4 is 3
tell me how to automate this
I am going to convert different costs during life time of a product to Net Present Worth (NPW), consisting Maintenance and Rehabilitation costs (M&Rj) and Salvage Value (SV), according to the following formula: [URL] .......
SV occurs only once at the end of life time, it's NPW in Excel can be calculated as following:
=PV(i discount, AP,0, SV,1)
But M&Rj costs occurs J time during life cycle, and formulating manually their mathematical formula most times takes much time. Exactly what should I write in the cell to get their total NPW? In other words, how can I get the following formula by Excel functions: [URL] .......
Reminder: NPW= FV( 1/(1+i Discount))^n
FV: future value
i Discount: discount rate
n: numbers of years (periods)
I have a repetitive task that needs to loop effectively. The only things that change each time are the start Columns ("C:C") next moves to ("D:D"), this then continues down the different columns, until it reaches the end of the columns.
The other thing that changes is the formula initially it starts at RC[-1]&"",""&RC[1]. Next time the numbers will be plus one, so RC[-2]&"",""&RC[2].
The last thing that moves is the "B1:B" & LR on the next step will move to "C1:C" & LR.
Basically a loop with variables in the loop. Is this possible? Below is the code I have begun to write but I could be writing this for ever, over and over again.
Code:
LR = Cells(Rows.Count, "A").End(xlUp).Row
Columns("B:B").Insert Shift:=xlToRight, CopyOrigin:=xlFormatFromLeftOrAbove
Range("B1").Select
ActiveCell.FormulaR1C1 = "=RC[-1]&"",""&RC[1]"
Selection.AutoFill Destination:=Range("B1:B" & LR)
[Code] .......
in data validation i have taken a list & assigned it to defined named range say industry ( 50 - 100 industries which are repetitive in nature)
now the problem is the data is neither sorted nor unique
but i want unique sorted data (i can not make changes in original data because of its other various linkages nested formulas)
There is a list of interconnections of panels.
For example:
From To
..................
P1.........P4
P2.........P4
P1.........P5
P1.........P4
P3.........P5
P2.........P4
P2.........P4
P2.........P3
There are hundreds of sheets like this with more complex panel numbers (there are 70 to 80 panels). I want to count the number of times each panel is linked with another panel i.e the number of times its name is mentioned in front of it.
This may look like as follows.
............P3.........P4.........P5
P1..........0..........2...........1
P2.........1...........3...........0
P3..........0...........0...........1
I have a workbook populated with values in 3 columns. The values of the second column group rows into larger segments. I want to pull one row for each different value onto a different sheet.
example:
1. apple
2. apple
3. apple
4. apple
How do I only pull one row of apples onto another sheet without copying by hand? I have attached an live example. I want to pull one row for each classification (column 2) named on the sheet without copy/pasting each one.
how can I modify the formula below so that after every row (i+60) the letter D changes to E then F, then G..... and so on. I want the following with the formula below:
=MAX($D$2:$D$61)
=MAX($E$62:$E$121)
=MAX($F$122:$F$181)
and so on...
[Code] .....
I have attached an example spreadsheet with two tabs. The first tab (Matrix) shows raw data scores - there are 28 measures in Column A and Participants in Row 1. There are always 28 measures but participants can vary. What I need to happen is to sort each measure in a Lineup tab i.e. rank all the participants listed in the Matrix tab from lowest score to highest score for each of the 28 measures. Obviously this can be done manually but a VBA/macro solution will be so much faster and easier. Unfortunately I have to keep the data in this format so the macro will need to transpose the data to get into the formt in the Lineup tab.
View 9 Replies View RelatedI have a column of repetitive data:
BLANK CELL
NAME
ADDRESS
CITY, STATE ZIP
BLANK CELL
I would like to be able to resort the dats so that each line becomes a column
BLANK CELL NAME ADDRESS CITY, STATE ZIP BLANK
CELL
I know I can do it 3 cells/rows at a time using the paste special and
transpose command but I have a 1000 names and addresses. How do I do it in
one operation instead of a thousand?
I have a few columns referencing Crash numbers. The majority of each column is a null value, with about 10-20% of it actually containing the number of a Crash. I want to run one MODE each on a column to see what the most common Crash is.
The following
=MODE(Table_X[Crash Alpha])
Results in a #N/A Value Not Available error. What do I need to change to make it work on the column with some nulls and some numbers (no strings)?
As a secondary question, if I wanted to apply a date filter (the columns are part of a table, including a Date column) like the below:
If(Table_X[DateTime]>F9,If(Table_X[DateTime]<F9+1, etc.)
(F9 being the location where my filter Date is)
Where would I apply that to the Mode? Should I just change it to an If statement, with the Mode positioned like so?
=If(Table_X[DateTime]>F9,If(Table_X[DateTime]<F9+1, MODE(Table_X[Crash Alpha]))
I've got the following table (see attachment). In a column A there're the articles and some of them appear several times. In column B there's the quantity. The goal is to get in column C the sum of quantities in column B for the repetitive articles in column A and then delete the repetitive articles.
so the table should look like:
3RD125070442H 30
3RE071870493H 4
3RI100009624T 15
in excel 2007 I found only the function to remove the duplicate cells but I need to get the sums before removing them and have no clue how to that.
I have a macro that works but was wondering if there is an easier way to shorten up the part of the code that is very repetitive with an array or ? Nothing I have tried works except the code below.
Code:
Sub ClearAndReset()
Dim WS1 As Worksheet
Set WS1 = ActiveWorkbook.Worksheets("Stocks")
WS1.Unprotect
Application.EnableEvents = False
With WS1
[code]....
I'm not sure what I'm trying to do is even possible, but figured this is the place to ask the question. I'm trying to compare a list of companies (column a) to a list of employee email addresses (column b) and post results (column c) that display all associated email addresses that are unique to company name. Since multiple employee email addresses can be associated with numerous company names.
View 2 Replies View RelatedI have a work book with several (couple of hundred) buttons, which when clicked display the contents of a range of cells in a message box as shown below;
View 4 Replies View RelatedI am getting ready to create a spreadsheet to list vendor's names and emails along with other data. I would like to include at the bottom of the email addresses a quick copy and paste distribution list. I have achieved this in the past by using a similar formula:
View 4 Replies View RelatedI am automating a paper form that collects information from 7 other paper forms and then prints out the results. I have created an excel spreadsheet to do this but I am having problems getting the printed output to match the print preview.
I have inserted an image of the form into the sheet header and aligned the cells on the sheet so that the information is in the correct position when previewed in "print preview".
The problem is that, although this will print correctly on the machine I created it on, it is misaligned on any other machine I have tried.
I need to print quite a few mailing labels for Christmas cards from an Excel 2000 Worksheet. Could someone list the steps I must take to do this?
View 2 Replies View Relatedi have included an example spreadsheet, hopefully someone can help me
i want a print button that when pressed with always print 'tab 1' and will print 'tab 2 3 4 etc... if a certain cell in 'tab 1' is greater than zero
please see my example spreadsheet and hopefully my problem will become clear if ive not explained myself very well.
I've made a 40 page list on Excel, On the very top of this list is my titles of whats is in the collums. How do I repeat this through out, so it appears on the top of every page.
View 3 Replies View RelatedI have inserted checkboxes in an excel worksheet to turn on/off certain data. They are working just fine. But I have set them all to not print (by unselecting the checkbox that says "print" in the format dialogue). SOME of the checkboxes don't print, but most of them do. I can't figure out why.
I've attached the file so you can take a look.
How can I print 2 or more sheets on a workbook of, say, 10 sheets at once? Is there a way to do this?
View 2 Replies View RelatedI've noticed with a spreadsheet at work that if you print a sheet it also prints the other sheet.
The first sheet is the data and the second is a graph formed from this data.
Is there an options to set to do this or is because its a graph formed from the data sheet that it automatically prints?
I have attached a sample sheet which is for invigilation of exams. In columns D, E & F are the initials of people invigilating at different times. What I want to able to do is to print personised sheets for each person where there initals are in bold and the box has a black border around it. This is very labour intensive if I do it manually as have to highlight one person, print, unhighlight and rehighlight the next person and so on. What I was wondering is could I use a macro to automate this process. So it has a list of all the initals and it searches through and highlights the person and prints it and then moves onto the next.
View 14 Replies View Related