I am trying wihout suceess to create a range to copy in a macro each time the macro loops. This is thus a dynamic range. My failed attempt is listed below. How is this done?
ColumnAdjust=2
For I = 1 To 282
Range ("B5").Select
Range(ActiveCellOffset(0,ColumnAdjust),ActiveCellOffset (0,ColumnAdjust+1))
Range(Selection, Selection.End(xlDown)).Select
Selection.Copy
.
.
.
ColumnAdjust= ColumnAdjust=2
Next I
I am attempting to create a dynamic range within a macro.
Each week, a list of performance factors is recorded for employees. The macro is about to do an Advanced Filter to create reports based on user-provided criteria. Since there is new data every week, the range used for the Advanced Filter is dynamic. The code for the Advanced Filter refers to a range entitled “Database.” My problem is in defining “Database.”
It is currently 534 rows and 8 columns, starting at A1.
The relevant portion of the macro currently reads:
Sub Check1()
ActiveWorkbook.Names.Add Name:="Database", RefersToR1C1:= _
"=OFFSET('Loan Officer History'!$A$1,0,0, COUNTA('Loan Officer History'!$A:$A),8)"
Range(Database).AdvancedFilter Action:=xlFilterCopy, CriteriaRange:=Range( _
"J1:Q2"), CopyToRange:=Range("J5:Q5"), Unique:=False
End Sub
When running the macro, the debugger stops at the line which starts "ActiveWorkbook.Names" and tells me “Run-time error ‘1004’. The formula you typed contains an error.”
I have a Ranking tab that has the persons name, weeks, months that subtotal into 2 columns, MTD and YTD. I have set up with 2 Macros to sort based on two columns based on their selection of MTD or YTD.
What I did not take into consideration is if a person was added at the bottom of the list.
Is there a way to modify this to include rows that may be added?
VB:
[SIZE=4]CODE HERE[/SIZE]
VB:
[B]Macro1
[/B]Sub SortYTD()
[Code].....
I recorded this macro based on a column with a drop down window in which data has been filtered .....
View 12 Replies View RelatedI need a bit of assistance in identifying the dynamic range so that my macro below will work:
View 3 Replies View RelatedI am still having some difficulty in getting a macro to select a print range on a text file imported into excel. All the data pulls into column A which is OK. I'm trying to get my macro to highlight & select the print range by going Home, End Down, Tab right Tab right and then select whatever that highlighted range is. This range will change from file to file.
My macro reads as follows:
Sub PrintToView()
'
' PrintToView Macro
' Macro recorded 5/5/2004 by
'
'
Range("A1").Select
[code]....
I am looking to run a marco for a selection range, and the selection range could vary in size.
Using the Macro recorded (whilst turning on the relative reference) the Macro runs for a defined number of cells. I would like to run certain Macro, for different ranges of cells.
I am not sure if my problem is in the dynamic range or not. I have attached a small sample file. I tried to create a dynamic range by creating a named range of my "LabelRow" with the following as the refers to: =OFFSET($C$32,0,1,0, COUNTA($32:$32))
When I set my cursor on this, Excel makes an outline on the whole row 32 where there is data, which gives me some clue that it understands what I am trying to define. Next, I try to pick this range up and paste it using named ranges in a macro (CopyRange). It gives me an error like it doesn't understand the named range. I do similar macro code in many other places in this project and it works with non-dynamic ranges. Here are some other details on this project. I need a dynamic range because I insert new data into the dataset, which may be 2 quarters up to 20 quarters. This insert causes a regular range to be messed up. My ultimate goal is to graph selected rows of data with the same labels, but I need to have it starting at Q1, which is pushed to the right as new rows are added.
I am trying to select rows in excel using a macro and then hide the rows, but i want to be able to add rows within this selection and still be able to hide the complete selection of rows.
The macro i am currently using is shown below: This hides rows 131 - 205, but if i was to add in another row in between so the range i now want to hide is 131-206 can i get the macro to update to this new range?
[Code] ......
I have been tring to define a dynamice range in VBA. At the moment, I use following method to Define the range,
Sub OTC_Future_Total()
Dim DynamicRange As Range
Worksheets("FinalReport").Select
Range("e9").Select
Set DynamicRange = Range(Selection, Selection.End(xlDown))
DynamicRange.Select...
I need to find average of the values , the count of the cells will be dynamic (may be 5 or even 200).
View 2 Replies View RelatedUltimate goal is to automatically update the source data for 4 pivot tables that are on 1 worksheet. The data for those 4 pivot tables are on 4 different worksheets w/in the same workbook. Consolidating into one dataset is not an option.
I'm familiar with a dynamic named range, but the 4 worksheets that contain the data are replaced daily via automated Access output which creates an error.
I know how to do this adhoc by matching the pivot table names with their respective worksheets, but there are many other documents with similar layouts where this would beneficial.
Below is an example of how I currently update 3 pivots on separate worksheets w/ the same data range which is w/in the same workbook. My proposed changes are below the current. Any ideas on how to return the workbook name as a string...Or am I going about this the completely wrong way...
I have a range which will change in size & in content, & I want this to be a Named Range at whatever size it is.
Reason I want to is because I want to make a Validation List with this dynamic range. I also want a Validation list which lists the content of 2 or more dynamic ranges which may or may not be on the same worksheet - is this possible?
i.e.
First dynamic range: called "Milestones" at A11
Second dynamic range: called "Activities" at A25
& make a Validation list that will list content of both
Im sorting a dynamic range as mentioned in this Sorting a Named Range. My range is called drWarningTypes and is defined as:
=OFFSET(DataSource!$A$2,0,0, COUNTA(DataSource!$A:$A)-1,1)
When there is only one cell in the range, then running the following sort function includes A1 also in the search (and also adjoining columns).....
I have a column of data that keeps getting new information in it. what i need is a named range that i can use for a chart, first point in the named range will be the first value in the column, second point will be avg. of point 1 and 2, then 3rd point will be avg. of 1,2,3 etc.
View 1 Replies View RelatedI am trying to get to grips with the dynamic ranges for pivot tables. I have named a range data and in the refers to section put:
=OFFSET(Sheet2!A1,0,0,COUNTA(Sheet2!A:A),COUNTA(Sheet2!1:1))
I was hoping that then when i go to data > Pivot table and it asks for the range i could put =Data but it tells me that the range is invalid. I have attached a copy at the bottom.
My searches have not produced anything that I could apply to this situation.
I'm trying to write VBA that would:
1. Search a Workbook for Dynamic Ranges.
2. When a Dynamic Range is found the code would:
A. Determine the current coordinates for the range.
B. Change the "Refers To" value From "=OFFSET...." To "=Worksheet_Name $Column$Row:$Column$Row"
3. Save Changes.
4. Close File.
My apologies but I have very little experience in writing VBA. I understand about variables, arguments, and IF/THEN but just enough to use functions within Excel.
I have a range of data that will grow as the days of the month pass but I need to run calculations on this range. The data is 13 columns wide but the number of rows will increase daily. I remember using a formula in the Define Range that would automatically take into account new additions using the OFFSET function but cannot for the life of me think how exactly to do it.
View 4 Replies View RelatedLine of code that will Select a Named Range in this case I have Named a CELL "DataSummary" Need to use that named range by selecting 30 columns and 54 rows.
Range("DataSummary),(??,??) doesn't work.
I have been working on part of the code for my spreadsheet and it works fine in the spreadsheet “Databaseform” however when I copied the code to my master spreadsheet “Paul_PartLocDBCombo” it does not work, I get the error:
Method ‘ range’ of object ‘_worksheet’ failed
The code is then highlighted in yellow, the code is:
Set rng = wksPartsData.Range("a1", Range("a65536").End(xlUp))
Meaning this part is incorrect but I don’t know why? To work it: go to Databaseform and press start. Enter 7mm in the product field and press find all. It will then return all the matching results in the userform. Its this I want to try and achieve on the other spreadsheet when the button find label is pressed.
I have this macro named ABC to bring the name ranges to another worksheet. The name ranges are already saved in the workbook with the below name range. I used "***" so that this formular can go to the last cell that has "***" on A column and it worked untill someone typed "(xxx)" and the range now stops right before the "(xxx)"
=OFFSET(Storage_Team2!$A$1,0,0,MATCH("***",Storage_Team2!$A:$A,-1),37)
What would be the best to create the range according to the specific words in a column?
i am coloring cells:
Sheets("MySheet").Range("a1:f200").Interior.ColorIndex = 5
i want a dynamic range, so something that would look like this as an excel function:
=OFFSET('MySheet'!$A$1,0,0, COUNTA('MySheet'!$A:$A),6)
i want the equivalent of this programmed (hard coded) into vba
i don't want to reference to a defined name with vba, because the user can delete that.
I wonder if there is a way to Sum the total of a Dynamic Range so that the summary will be presented in the upper Cell of the summed column?
(please see the attached picture).
The reason is to anable FREEZING of the first row (display the totals all the time even when scrolling down) as the list will get very long after a while.
I am looking to sum a dynamic range and can't quite figure it out. The data expands down rows every week, and I want the sum formula (the final row) at the bottom to include the newly updated rows. I can't dynamically name the numbers to be summed because the dynamic named range will include the sum number and create a circular reference. For example:
5
4
3
2
14
the bottom row (14) is the sum. Next week, my numbers are
5
4
3
2
5
19
I have a macro that will automatically put the sum formula in the correct row and column, but can't quite figure out the formula.
I am currently recorded a macros for a sumif formula. But since the number of rows will not be same every time.
I want the code for a dynamic range.
VB:
Range("E7").Select
ActiveCell.FormulaR1C1 = _
"=SUMIF('V1 Pivot'!R5C2:R32C2,'Task Level Tab'!R7C2:R30C2,'V1 Pivot'!R5C3:R32C3)"
Range("E7").Select
[Code] ....
I need the code for formatting to be edited, so that it work dynamically for any range
VB:
Range("B16:L16").Select
Selection.Borders(xlDiagonalDown).LineStyle = xlNone
Selection.Borders(xlDiagonalUp).LineStyle = xlNone
Selection.Borders(xlEdgeLeft).LineStyle = xlNone
With Selection.Borders(xlEdgeTop)
[Code] .....
Here the columns "B" and "L" shall be constant, but the number 16 may vary depending upon the number of lines in the sheet.
I have column A fill with dates and column B with customer code. I'm looking to count the number of time the customer code (column B) is repeating but ONLY in previous year. Meaning that the count range must be adapt for each customer code. Will a countifs is able to work with this request?
View 6 Replies View RelatedI am working with loans, and I'm trying to program a routine that adds every installment a client owes, so I can know the total amount owed, depending on how many unpaid installments she has. Let say for a client I have every installment in column A (rows 1 to 5), and in column B, I want to add them all. The output should be
Cell B1: "sum(A1:A5)"
Cell B2: "sum(A2:A5)"
Cell B3: "sum(A3:A5)"... and so forth
Since I have many loans, I need a dinamic routine to that sums every installment, where amount of installments vary from client to client. My proposal is (adding from the last installment to the first one):
VB:
months = 4 'an example
For j = 0 To months - 1
initial_row = ActiveCell.Row 'because I run this several times. In this example I am in row 18[code]....
For some reason this is not working, and what I see in Excel after running it is: SUM('AJ18':'AJ18'), which doesn't work.
I have data in 2 columns on which I need to do vlookup. This range for vlookup increases. I want to name this dynamic range. How do I do it?
View 1 Replies View RelatedI'm trying to name a dynamic range for A2:B10000.... I know how to use the OFFSET function but was wondering to do it using the INDEX function
Both column will always have the same number of used rows.
Another question:
If I have dates in Column A, and values in Column B....what formula do I need to get me the last value (last row,most recent Date)