I am not sure if my problem is in the dynamic range or not. I have attached a small sample file. I tried to create a dynamic range by creating a named range of my "LabelRow" with the following as the refers to: =OFFSET($C$32,0,1,0, COUNTA($32:$32))
When I set my cursor on this, Excel makes an outline on the whole row 32 where there is data, which gives me some clue that it understands what I am trying to define. Next, I try to pick this range up and paste it using named ranges in a macro (CopyRange). It gives me an error like it doesn't understand the named range. I do similar macro code in many other places in this project and it works with non-dynamic ranges. Here are some other details on this project. I need a dynamic range because I insert new data into the dataset, which may be 2 quarters up to 20 quarters. This insert causes a regular range to be messed up. My ultimate goal is to graph selected rows of data with the same labels, but I need to have it starting at Q1, which is pushed to the right as new rows are added.
I want to search a word in my Data sheet and want to know what is the column position. Example: I have a word "LastName" as a Column header in my Datasheet whose column position can be anywhere in the datasheet based on the table selected. So i want to write a generic code which give me COLUMN position for this word in the datasheet.
So if "LASTNAME" header is coming as 7th column it return me 7 if "LASTNAME" header is coming as 9th column it return me 9.
I have a macro that copies and pastes into another sheet. When I add a row of data into my spreadsheet I want the macro to be able to change the range size and copy and paste the add row with the prior data.
I am trying wihout suceess to create a range to copy in a macro each time the macro loops. This is thus a dynamic range. My failed attempt is listed below. How is this done?
ColumnAdjust=2 For I = 1 To 282 Range ("B5").Select Range(ActiveCellOffset(0,ColumnAdjust),ActiveCellOffset (0,ColumnAdjust+1)) Range(Selection, Selection.End(xlDown)).Select Selection.Copy . . . ColumnAdjust= ColumnAdjust=2 Next I
I am attempting to create a dynamic range within a macro.
Each week, a list of performance factors is recorded for employees. The macro is about to do an Advanced Filter to create reports based on user-provided criteria. Since there is new data every week, the range used for the Advanced Filter is dynamic. The code for the Advanced Filter refers to a range entitled “Database.” My problem is in defining “Database.”
It is currently 534 rows and 8 columns, starting at A1.
The relevant portion of the macro currently reads:
I have a Ranking tab that has the persons name, weeks, months that subtotal into 2 columns, MTD and YTD. I have set up with 2 Macros to sort based on two columns based on their selection of MTD or YTD.
What I did not take into consideration is if a person was added at the bottom of the list.
Is there a way to modify this to include rows that may be added?
I am still having some difficulty in getting a macro to select a print range on a text file imported into excel. All the data pulls into column A which is OK. I'm trying to get my macro to highlight & select the print range by going Home, End Down, Tab right Tab right and then select whatever that highlighted range is. This range will change from file to file.
My macro reads as follows:
Sub PrintToView() ' ' PrintToView Macro ' Macro recorded 5/5/2004 by ' ' Range("A1").Select
I am looking to run a marco for a selection range, and the selection range could vary in size. Using the Macro recorded (whilst turning on the relative reference) the Macro runs for a defined number of cells. I would like to run certain Macro, for different ranges of cells.
I am trying to select rows in excel using a macro and then hide the rows, but i want to be able to add rows within this selection and still be able to hide the complete selection of rows.
The macro i am currently using is shown below: This hides rows 131 - 205, but if i was to add in another row in between so the range i now want to hide is 131-206 can i get the macro to update to this new range?
Ultimate goal is to automatically update the source data for 4 pivot tables that are on 1 worksheet. The data for those 4 pivot tables are on 4 different worksheets w/in the same workbook. Consolidating into one dataset is not an option.
I'm familiar with a dynamic named range, but the 4 worksheets that contain the data are replaced daily via automated Access output which creates an error.
I know how to do this adhoc by matching the pivot table names with their respective worksheets, but there are many other documents with similar layouts where this would beneficial.
Below is an example of how I currently update 3 pivots on separate worksheets w/ the same data range which is w/in the same workbook. My proposed changes are below the current. Any ideas on how to return the workbook name as a string...Or am I going about this the completely wrong way...
I have a range which will change in size & in content, & I want this to be a Named Range at whatever size it is.
Reason I want to is because I want to make a Validation List with this dynamic range. I also want a Validation list which lists the content of 2 or more dynamic ranges which may or may not be on the same worksheet - is this possible?
i.e. First dynamic range: called "Milestones" at A11 Second dynamic range: called "Activities" at A25 & make a Validation list that will list content of both
At the moment I have the below formula that retrieves a value from a separate sheet (the INDIRECT part of the formula determines the sheet to be looked at, as there are numerous and they are dependent upon what is displayed in two drop down lists in cells B3 & E3).
The problem is that the ranges F6:F30000, AJ6:AJ30000 and AA6:AA30000 are not always consistently in the same column position each and every time I receive a refresh of the report. The column headings, however, are always in the same row. Obviously I don't want to have to manually update the formula every time I receive a refresh of the report, so any way that I can get the aforementioned ranges to become more dynamic, so that the correct value will be retrieved each time? I am thinking something like an INDEX/MATCH combo but I am struggling to apply that idea to the 'SUM RANGE' section of the SUMIF function. This is the formula I have so far:
I have a spreadsheet where I need to perform a calculation on the lowest 10 of the 20 most recent entries. Currently I am just deleting the oldest entry and putting in the new data but I now desire to keep all my data.
How do I select the new range of 20 rows and then tell it to take the 10 lowest values to perform the calculation
I have a Conditional Formatting query where in essence I am needing to ‘make invisible’ a range of data by changing the font and background fill to white (and at the same time nullifying the effects of a number of other Conditional Formats). On the surface, this seems an easy thing to achieve, but the problem is, the range I need to apply this CF is a moving range and is dependant on a user changeable date.
Description of worksheet:
The sheet is managing shifts worked over 1 year by 21 people. The top 33 rows are a frozen (and collapsing) display area below which is a matrix of 365 days down and 21 people across. The TODAY button uses a macro to scan the dates and display todays entry directly beneath the freeze line of row 33. The date in M28 can be entered manually and after hitting enter, that dates data is now displayed under the freeze line. Also, using the spin button will increment or decrement the date in M28 moving the entire matrix up or down.
What I’m hoping to achieve, is to display ONLY the data selected by the date in M28 (ie that shown under the freeze line, and for all remaining rows to be ‘whited out’, but as the user increments/decrements M28, then the “whiteout” range also needs to increment/decrement. I have whited out a second worksheet “example” as if I had selected 18 Jan (this sheet will not move as there are no buttons, but the data is still there under the whiteout).
I hope this is not TOO unclear, but I would be grateful if anyone could suggest a solution or even tell me if this is not possible – or indeed any other way of achieving the same result ( I had thought of hiding the rows below the freeze line, but the freeze/unfreeze operation would probably be too jerky.
I have an excel work book with 6 tabs. I would like to have Excel move an entire row from one tab to another tab (removing the row and inserting it in the other tab). I.e. Example I have a tab with items that are marked as "Open Actions" so if I were to change the drop down to close. Excel would move that entire row of actions to the tab with the "closed actions" and insert into the next available row. Now if someone were to come back at a later date say no it should be reopened than I would change the drop down to open and excel would move that row back to the open actions tab into next available row. I tried a PIVOT table and no good I played with few macro and not.
I am using the built in moving average function to calculate the moving average of a set of numbers. There are a few things that i would like to do.
First i would like to have the last result displayed in a single cell. Then next to that cell i would like to have a cell that would specify the period of the moving average. I would like to be able to change the period in that cell and have that change it in the actual function. And finally i would like to have the moving average in a chart that would also change its period once that is changed in the respective cell. I realize that this might need some VB coding which i am currently learning.
I had this code working on a Range in a Worksheet. I decided I needed to move the range to another worksheet. I moved the data to column AA in a new sheet called Audit_Pool and renamed the sheet name in ThisWorkbook.Sheets, but I get a runtime error at the With Range statement.
I have the following code that works properly, Copy & Paste Same Range On Protected Sheet From Multiple Workbooks
Sub RunCodeOnAllXLSFiles() Dim lCount As Long Dim wbResults As Workbook Dim wbCodeBook As Workbook, book1R As Range Application. ScreenUpdating = False Application.DisplayAlerts = False Application.EnableEvents = False On Error Resume Next Set wbCodeBook = ThisWorkbook With Application.FileSearch .NewSearch 'Change path to suit...............
I have a column of data that keeps getting new information in it. what i need is a named range that i can use for a chart, first point in the named range will be the first value in the column, second point will be avg. of point 1 and 2, then 3rd point will be avg. of 1,2,3 etc.