I am filtering a list in Column H and depending on what criteria I filter on I need to be able to select only what I have actually filtered for. I am using the code below to find the lower right corner of my range that I'm trying to select and this works great.
I am looking to run a marco for a selection range, and the selection range could vary in size. Using the Macro recorded (whilst turning on the relative reference) the Macro runs for a defined number of cells. I would like to run certain Macro, for different ranges of cells.
I have three rows that each attempt to pull in data from a range on different worksheets. All but one return nothing but "#N/A" values. The one row returns values from the proper range. (User selections determine which row will have data).
Second, I successfully pull data from the row containing actual information into another row, using the following formula: "=OFFSET(E$36,CHOOSE($Y$1,0,1,2),0)" on a cell-to-cell basis. The value in $Y$1 chooses the row to look at, based upon a dropdown selected on another worksheet.
So I now have a row with =OFFSET(E$36,CHOOSE($Y$1,0,1,2),0),=OFFSET(F$36,CHOOSE($Y$1,0,1,2),0),=OFFSET(G$36,CHOOSE($Y$1,0,1,2),0) and so forth. I can find the last value in the row, but I cannot find a way to extract the address from that, and create a table that will use as a series the last 26 values in the row.
For reference, I use "=LOOKUP(9.99999999999999E+307,E49:FD49)" to determine the last cell with a value (gleaned from a Dueling Excel Youtube Video, - very helpful!).
I hope the above will be clear enough, but if not, I'll be happy to provide additional information / clarification.
I have a log that I use to keep track of my hours where the days hours and charge numbers get summed and moved to a new sheet via a command button. One of the categories is week ending date. I want the week ending date cells to merge if they match and cannot get the range I want to highlight. I can move the data, find and define the first and last cells in the range, but can't get the range.select command to work. I think it is just a syntax error, as I am new to VBA.
I can open a Locals window and watch it assign values to myFirstCell and myLastCell of "$A$36" and "$A$44" respectively, but I get an error on either the set range= or range.select lines.
My code is as follows:
Private Sub Post_Hours_To_Log_Click() 'Posts the day's hours to the hours tracker.
Dim myFirstCell, myLastCell As Variant
Dim myRange As Variant
***Removed N/A code that goes to another sheet and decides which data to copy*** Application.Goto reference:=Worksheets("Hours Log").Range("A2"), _ Scroll:=False
Sheet1 ABCDEFGH2Days12345673Values2040550000 Excel tables to the web >> Excel Jeanie HTML 4
I have plotted a line graph based on the above table; but I am getting zero values also plotted. since these Values are linked to some other workbook I can't delete the cell values also. How can we avoid Zero values on a graph; Also is there any approach, that my graph should get automatically updated whenever the linked values are updated.
I will receive one master file which contains the table and it's values and I have another working sheet where I will update the require details. Every time I will copy the entire master data into working file in order to extract the values by using vlookup function. note that the master file has different names each time. So, that if I use vlookup by taking master data path but not getting the results.
I am looking one macro code to select file (master data) and paste the values based on vlooup references in workings sheets. Note this master data file name may change but reference range always same.
The CRM application that we use provides output in an excel sheet "Table View 1". I want to be able to copy the data that is dumped to a sheet to another sheet. The requirements:The data output range is different. Sometimes it is 4 rows and sometimes it is 25 rows. I want a mechanism where based on the output, the formula/macro automatically copies the information to the new sheet.The first 2 rows need to be excluded when the copy is being made.
I have a spreadsheet where I've disallowed selection of multiple cells using the code in the 2nd box below, but is there a way to override this protection to allow selection of a named range? My reason for doing so is to open this workbook as read only from code in another workbook and copy the entire table. My code for doing that works ok (I frequently use it in other workbooks) but, in this case, my need to disallow selection of multiple cells in this particular worksheet is tripping me up.
This is the code I'm using to try and pull the data into another workbook:
and this is the code I have in RSL-Jobs-Register.xls which is preventing me from selecting the (dynamic) named range called "JobsTable".
Code:
''' I'm thinking I could have something here like (in plain English) "If selected range "JobsTable" Then" ''' (apply the code below) but I'm not sure of the code
If Selection.Cells.Count > 1 Then MsgBox "Sorry, operations on multiple selections aren't allowed here", vbCritical ActiveCell.Select Exit Sub End If
The formula for the dynamic named range called "JobsTable":
If a user selects certain options from a drop down list created by cell verification (from list), is it possible to display an input box and have the resulting input populate on another worksheet in the workbook? I have an attendance template I'm working with and if a user selects OT (Over Time) then a input box is displayed prompting for how many hours. The overtime is then tracked on another worksheet.
I tried very hard to design a leave roster for user to mark their leave application. The criteria are as follows:
1. 4 applications per date 2. a region of worksheet (i.e. "A2 to H20) will be defined for users to "click" on the cells (within the defined region) to mark their application. 3. once a cell is clicked (i.e. marked), it cannot be altered. 4. each click will automatically increase the total by 1.
I got the following code to deal with the situation but user can still click on any cell outside the region (in fact I fail to define the region).
Private Sub Worksheet_SelectionChange(ByVal Target As Range) Dim m ad = Mid(ActiveCell.Address, 2, 1) m = Range(ad & 24).Value 'here a formula "CountA(A2,A20)" will be place in the cell (24, c).......................
I have attached a portion of an excel file I am using at the moment. What I require is a piece of VBA code which will allow me to copy selected data based on a combo box selection. What needs to happen is this :-
If the selection in the "Index" worksheet combo box related to "Month" in cell G19 is for instance "December", I would like the macro to compare this cell value to the cell values in cells C96, C124, C152, C180, C209, C236, C263 and C290 in the "Tech Services" worksheet and where the values match.......copy the commentary (Range C126:Z147 in December's case) to the range C34:Z55.
I am working on a project where user has to select an item from a listbox, however there is a condition that if user select an item, other items of listbox should be disabled so that he/she can not select any other item.
I want to have a drop down list in a cell so that the value in the cell can be only selected from two columns of data. Additionally once the data from the first column has been selected I want to be able to limit the inputs the user can select from in the second column.
e.g. In cell C115 I want to have the value BDS05.
I want to be able to select the value BDS from a drop down list of values and once that value has been selected I want to be able select 05 from a list of values from 01 to 14 If I select BCS as the first value then I want the second set of values to be limited to 01 to 02 etc.
I have read about combo boxes and list boxes and I'm a bit confused about the best way to achieve this (or even if I can).
I have a range which will change in size & in content, & I want this to be a Named Range at whatever size it is.
Reason I want to is because I want to make a Validation List with this dynamic range. I also want a Validation list which lists the content of 2 or more dynamic ranges which may or may not be on the same worksheet - is this possible?
i.e. First dynamic range: called "Milestones" at A11 Second dynamic range: called "Activities" at A25 & make a Validation list that will list content of both
I would like to replace the blue bit of this Dynamic Named Range (DNR) with an INDIRECT formula in order to modify the starting point for the DNR: =OFFSET(DATA!$C$60,0,0,20,1). Unfortunately, I can’t seem to get my INDIRECT formula to work in order to use it to replace the blue bit above: INDIRECT("'"DATA"'!&ADDRESS(MATCH('SHEET1'!AC8,DATA_Date,0)+22,3)"). The orange bit of the formula above returns a value of 60, therefore the ADDRESS formula should return $C$60, that can then feed into the INDIRECT and act as the equivalent of DATA!$C$60. But it doesn’t.
Private Sub Worksheet_SelectionChange(ByVal Target As Range) col = ActiveCell.Column Range("output") = ActiveCell.Offset(0, -(col - 4)).Value End Sub
In case it's not obvious, the macro places the value in the active row and 4th column of the worksheet into the range "output". The problem is, the worksheet is large and somewhat slow to recalculate. This macro forces a recalc on any selection change, but i only need it to run when the row selection changes, not the column. I'm sure there's a straightforward way to reprogram this.
I'm trying to build an investment calculator. Tried searching "calculator" as keyword but return nothing similiar.
There are eight cell : [ A ][ B ][ C ][ D ][ E ][ F ][ G ][h]
[ H ] is price of the leverage
[A] is X balance [b] is X lot size [C] is X amount of money use to get x lot [D] is X percentage of money use to get x lot [E] is X point gain [f] is X money gain [G] is balance + money gain
Ignore the formulae for leverage to determine 1 lot price. Take 1 lot = 250.
What I'm looking for is when I enter any value at cell B, C or D, it will automatically calculate the value for either B, C or D cell.
Let say, the balance is 10000.
If I enter 2 at cell B. Then, it will calculate the value for cell C & D.
If I enter 750 at cell C, then it will calculate value for cell B & D.
If I enter 25 at cell D, it will calculate value for cell B & C.
I have a question on the above but can't seem to find a solution. There are two ways that I can find for dealing with dynamic lists via data validation:-
1) Offset and match, cavet being the data must be sorted a-z 2) Have lists for each potential selection
Is there any way to get around 1 without having to do 2? E.g. Got two columns of data, unsorted, and a list from which the user can choose from. The user chooses from the list in first cell, in the second cell require the dynamic list to return all the values accordingly?
I have a dynamic table which is linked to a couple of charts. The table must remain dynamic.
I needed to add two new columns to the table, "Focus Area" and "Category". I need a drop down list in the "Category" column to be dependent on the item selected from a drop down menu in "Focus Area".
I can get the first row of the dynamic table to do this.... however; subsequent rows all lock the drop down list in the "Category" column to the same choices regardless of what is chosen in the "Focus Area" list.
Is there a way to make dynamic drop downs within a dynamic table?
I have a code (pasted below) that copys a line of data from one workbook into another. Each time i run the code it enters the data on the next available line. This is all working ok however what I would really like to do is when i run the code have it pop up a selection box asking me which sheet i would like to copy from. The reason i need this is that the sheet that gives the data isn't always named the same although the format is exactly the same every time. In this example the data sheet is "copy of NewProductForm), this name may change and i may also have other different active workbooks open at the same time and I don't want the macro to get data from them.
Code :
Sub GetData() Windows("Copy of NewProductForm.xls").Activate Rows("48:48").Select Selection.Copy Windows("Book2.xls").Activate NextRow = Range("A65536").End(xlUp).Row + 1 Range("A" & NextRow).Select Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False Windows("Copy of NewProductForm.xls").Activate Application.CutCopyMode = False Range("A41:AH41").Select Windows("Book2.xls").Activate End Sub
I am trying to format a range of cells based on a user selection. The user may select 8 rows (rows 20 - 27) or the might just select A20 to A27 or the may select A20 to C27 on all of the occasions I would like to find the 1st row and the last row of a selection. I have found the command
x = ActiveWindow.RangeSelection.Address
which I could try and extract the row numbers, but is there an easier way?
I want to program a macro that reads out the min row number and max row number of a selection.
Lets say a user selected the Range A1:D4. After executing the macro I want the following output: The min row number of the selection is: 1 The max row number of the selction is: 4
I have a list of 4 customers and their individual revenue, which is summed up in cell E12.
What needs to be done to make Excel only sum revenue of say customer A and D in cell 12 upon selection of these through standard filter (see attached sample)?
I've attached a sheet. In this sheet I would like to print the selection....C9:17 and BL9:BW17. I would like to print it onto a PDF and I would like to expand it so it is very visible. Actually, it doesn't need to be PDF. If I could just print this selection and make it visible that would work. I had a problem using print selection because the columns are separated. I also tried fit to page but that makes it too small.Mod's note: file attachment removed at OP's request
I'm having a problem summing after running arrays to analyse data. I have a list of four possible outcomes and I need sum up the totals, but sometimes there are no results, so there is #DIV/0 in the list I need to find the total for.
is there some code or some kind of formatting that would give me a total even if #DIV/0 is in the list?
I've currently written the following code to make sure exactly 2 single cell selections are made. But now, I want to extend this code to make sure only cells from rows 5 & 7 are selected and the cells are in the same column.
