Copy Data From One Sheet To Another With Dynamic Range Selection?

Feb 21, 2011

The CRM application that we use provides output in an excel sheet "Table View 1". I want to be able to copy the data that is dumped to a sheet to another sheet. The requirements:The data output range is different. Sometimes it is 4 rows and sometimes it is 25 rows. I want a mechanism where based on the output, the formula/macro automatically copies the information to the new sheet.The first 2 rows need to be excluded when the copy is being made.

View 6 Replies


ADVERTISEMENT

Range Selection Programmatically And Copy To Another Sheet

Apr 15, 2014

I want to select a range of cells (not together I.e. b2, c3,c4,g7 etc) and copy them to another sheet but I need to check which cell has been selected as I am using a check box to set a cell as true or false if ticked or not, so if ticked a certain cell will be added to the selection set to be copied.

View 7 Replies View Related

Copy And Pasting A Dynamic Range From One Sheet To Another?

Aug 5, 2014

I'm trying to copy a range of column headers from one worksheet and paste them in another using a macro
The source range starts at Q1 and runs along row 1 for a variable number of columns each time.The destination cells start at B1 and will run along row 1 for the same number of columns.

I've got as far as counting the number of source columns

PHP Code: 

Dim LastDate As Long

LastDate = Sheets("Edited data").cells(1, Columns.Count).End(xlToLeft).Column 

how to paste to a changing number of columns

PHP Code: 

 Sheets("Edited data").Range("Q1", cells(1, LastDate)).copy Destination:=Sheets("Variety Total").Range("B1", ????) 

View 2 Replies View Related

VBA Copy Dynamic Range From Multi Sheet To Sheet3

Oct 25, 2012

I am trying to copy a range of valid cells "non-blank" from "sheet_a" ,"sheet_b" ,"sheet_c" to "sheet3" i was successful to copy from one sheet only. how to copy from all the sheets listed from the same workbook.

following is the VBA code i am using

Sub CopySample()
Dim shSrc As Worksheet
Dim shDst As Worksheet

[Code]....

View 1 Replies View Related

Dynamic Range Selection

Feb 8, 2010

I am filtering a list in Column H and depending on what criteria I filter on I need to be able to select only what I have actually filtered for. I am using the code below to find the lower right corner of my range that I'm trying to select and this works great.

View 3 Replies View Related

Copy / Paste Dynamic Range Of Cells With Data From One Day

May 28, 2014

I have a range of cells with data from one day. This range is "C36:K63"

Each day, the prior day's range needs to be copied and pasted into a new range that begins two rows below where the prior day's range ends.

Thus, day two should copy "C36:K63" into a new range: "C65:K92"

As you can tell, the rows will change each day, but the columns will always remain the same.

How can I create a macro that allows a user to copy data from the most recent range and paste it into a new range?

i.e. if there is no data in C65:K92, the macro should copy the data from C36:K63 and paste it into C65:K92. Then, the next day, the macro would copy the data from C65:K92 and paste into C94:K121.

View 2 Replies View Related

Macro To Run On A Dynamic Selection Range

Oct 13, 2008

I am looking to run a marco for a selection range, and the selection range could vary in size.
Using the Macro recorded (whilst turning on the relative reference) the Macro runs for a defined number of cells. I would like to run certain Macro, for different ranges of cells.

View 9 Replies View Related

Dynamic Range Selection For Charting

May 7, 2009

I have three rows that each attempt to pull in data from a range on different worksheets. All but one return nothing but "#N/A" values. The one row returns values from the proper range. (User selections determine which row will have data).

Second, I successfully pull data from the row containing actual information into another row, using the following formula: "=OFFSET(E$36,CHOOSE($Y$1,0,1,2),0)" on a cell-to-cell basis. The value in $Y$1 chooses the row to look at, based upon a dropdown selected on another worksheet.

So I now have a row with =OFFSET(E$36,CHOOSE($Y$1,0,1,2),0),=OFFSET(F$36,CHOOSE($Y$1,0,1,2),0),=OFFSET(G$36,CHOOSE($Y$1,0,1,2),0) and so forth. I can find the last value in the row, but I cannot find a way to extract the address from that, and create a table that will use as a series the last 26 values in the row.

For reference, I use "=LOOKUP(9.99999999999999E+307,E49:FD49)" to determine the last cell with a value (gleaned from a Dueling Excel Youtube Video, - very helpful!).

I hope the above will be clear enough, but if not, I'll be happy to provide additional information / clarification.

View 9 Replies View Related

VBA Dynamic Range Selection Failure

Aug 3, 2009

I have a log that I use to keep track of my hours where the days hours and charge numbers get summed and moved to a new sheet via a command button. One of the categories is week ending date. I want the week ending date cells to merge if they match and cannot get the range I want to highlight. I can move the data, find and define the first and last cells in the range, but can't get the range.select command to work. I think it is just a syntax error, as I am new to VBA.

I can open a Locals window and watch it assign values to myFirstCell and myLastCell of "$A$36" and "$A$44" respectively, but I get an error on either the set range= or range.select lines.

My code is as follows:

Private Sub Post_Hours_To_Log_Click()
'Posts the day's hours to the hours tracker.

Dim myFirstCell, myLastCell As Variant

Dim myRange As Variant

***Removed N/A code that goes to another sheet and decides which data to copy***
Application.Goto reference:=Worksheets("Hours Log").Range("A2"), _
Scroll:=False

View 9 Replies View Related

Completing Range Of Cells Based On Data On Another Sheet Prompted By Dropdown Selection

Mar 23, 2014

First sheet has a client name and several cells of data along the same line. All of the data on this sheet is kept long term.

The second sheet is completed copied and deleted. In completing the second sheet the client name is selected of a drop down list and pulled from sheet one.

What I want to do and not sure if there is a way is that when I select a client and populate it on sheet two I would like the related data on that clients line from sheet one to populate to same named lines on sheet two.

if this is possible and if so provide a brief description of how it would work

View 3 Replies View Related

How To Only Allow Multiple Cell Selection If Named As Dynamic Range

May 13, 2014

I have a spreadsheet where I've disallowed selection of multiple cells using the code in the 2nd box below, but is there a way to override this protection to allow selection of a named range? My reason for doing so is to open this workbook as read only from code in another workbook and copy the entire table. My code for doing that works ok (I frequently use it in other workbooks) but, in this case, my need to disallow selection of multiple cells in this particular worksheet is tripping me up.

This is the code I'm using to try and pull the data into another workbook:

Code:

Workbooks.Open Filename:=ThisWorkbook.Path & "RSL-Jobs-Register.xls", ReadOnly:=True
Application.GoTo Reference:="JobsTable"
Selection.Copy

and this is the code I have in RSL-Jobs-Register.xls which is preventing me from selecting the (dynamic) named range called "JobsTable".

Code:

''' I'm thinking I could have something here like (in plain English) "If selected range "JobsTable" Then"
''' (apply the code below) but I'm not sure of the code

If Selection.Cells.Count > 1 Then
MsgBox "Sorry, operations on multiple selections aren't allowed here", vbCritical
ActiveCell.Select
Exit Sub
End If

The formula for the dynamic named range called "JobsTable":

=OFFSET(Jobs!$A$2,1,0,COUNTA(Jobs!$A:$A)-2,11)

View 1 Replies View Related

When Data File Close Sheet To Sheet Range To Range Copy

Sep 28, 2008

i have a main.xls file and two data file dat1.xls and dat2.xls

mail named file have ar - br- cr- dr- er -fr sheets

dat1 named file have ar-br-cr sheets

dat2 named file have dr-er-fr sheets

and all this files data source is

colomn source a - fd
row source 29-4000

i want to make two commandbutton to main file first for dat1 second for dat2 file and i need a code to use at this buttons to make

when dat1 and dat2 close

main file user when click first button

copy dat1 file ar sheet colomn source a - fd row source 29-4000 cells to main file ar sheet colomn source a - fd row source 29-4000 cells

copy dat1 file br sheet colomn source a - fd row source 29-4000 cells to main file br sheet colomn source a - fd row source 29-4000 cells

copy dat1 file cr sheet colomn source a - fd row source 29-4000 cells to main file cr sheet colomn source a - fd row source 29-4000 cells

View 9 Replies View Related

Data Sorted On Dynamic Selection

Aug 22, 2013

I have data that I need to be dynamically sorted in the highlighted manner. The values on the selection criteria are dynamic.

View 14 Replies View Related

Dynamic Selection Of Data For Chart

Oct 13, 2009

I have a follwing data:

Sheet1 ABCDEFGH2Days12345673Values2040550000 Excel tables to the web >> Excel Jeanie HTML 4

I have plotted a line graph based on the above table; but I am getting zero values also plotted. since these Values are linked to some other workbook I can't delete the cell values also.
How can we avoid Zero values on a graph; Also is there any approach, that my graph should get automatically updated whenever the linked values are updated.

View 9 Replies View Related

Macro For Copy / Paste Selection Of Row To New Row On New Sheet?

Jul 7, 2009

Copy paste macro that I'm using to transfer information from Sheet1 to sheet 3. The macro must:

On the click of a command button copy information from A5 to M5 and A6 to M6 and paste it to the next 2 free rows on sheet3 between columns A and M.

After the copy/paste the macro must clear the information from the input sheet - A5:M5 and A6:M6 - but retain the formatting.

View 9 Replies View Related

Macro For Copy/paste Selection Of A Row To A New Row On New Sheet

Jul 7, 2009

I'm new to excel and VBA and I'm having problems with a copy paste macro that Im using to transfer information from Sheet1 to sheet 3. The macro must:

On the click of a command button copy information from A5 to M5 and A6 to M6 and paste it to the next 2 free rows on sheet3 between columns A and M.

After the copy/paste the macro must clear the information from the input sheet - A5:M5 and A6:M6 - but retain the formatting.Thank You.

View 9 Replies View Related

Deleting Particular Sheet / Range Or Selection

Oct 2, 2012

Any easy way of finding out if deleting a particular sheet / range or selection will mess up any references elsewhere in the workbook?

View 1 Replies View Related

Copy Two Dynamic Columns Into One On Another Sheet

Aug 12, 2008

I've searched and tried some similar examples but cannot find a fit that works. I have two columns of data on the same worksheet- IO2 & IR2 (3 columns apart) that will have varying end lengths. I need to combine these into one column on a different tab ( cell A8)- one on top of the other. When it gets to the first blank cell I want it to stop and grab the second column till it gets to the first blank cell. Note-these columns need to stay in the current order but format will not matter. It sounds so simple but I cannot make a formula or macro do what I need it to. I would prefer a macro because the workbook is already so slow.

There is a second part too (but I couldn't even get past the first!). Once the above is done. I will actually have the process repeat and return two different columns next to each other. I then want to reference these two columns and a month and find the correlating set of date in the first worksheet and bring it over. Here is the current macro I was trying (for part 1) but I can only get 1 column returned.

Sub FCST()
Dim improw As Long, impColumn As Long, MyCell
Dim ws1 As Worksheet, ws2 As Worksheet
Dim improw2 As Long, impcolumn2 As Long
Application. ScreenUpdating = False
Set ws1 = ActiveWorkbook.Sheets("Marketing")
Set ws2 = ActiveWorkbook.Sheets(" Forecast")
improw2 = 8
impcolumn2 = 1
impColumn = 249
Do Until impColumn = 252
improw = 2
Do Until improw = 11078 'this is the number of possible entries in each column.........................

View 4 Replies View Related

How To Copy Table From One Sheet To Another Based On Dropdown Selection

Jan 16, 2014

Need achieving the following:

I have 2 sheets in one workbook, the first sheet named D1 where I have dropdown menus and the second sheet called reference where I have fixed data

what im looking for is when the user select an option from the dropdown menu on cell b3 on "D1" sheet based on the selection an entire table (4 rows by 3 columns) called "Default" from reference sheet to be automatically pasted into the D1 sheet.

View 1 Replies View Related

Cant Pull Data From Another Sheet After Drop Down List Selection From Another Sheet

Jul 31, 2009

I have an excel workbook with two sheets. Sheet 1 has a list of people names, rank, address, and phone numbers. Sheet 2 has boxes where a user can select a last name from all last names in sheet1. What I want to happen after the user selects the last name in sheet 2 is for it to automatically fill in the rest of the data (ie Rank, First Name, Address, city, Home phone number, Cell Phone number). What do I need to do in order for this to work?. Attached is a very small example of my much larger project.

View 3 Replies View Related

Dynamic Range For A Copy Macro.

Feb 20, 2009

I need a bit of assistance in identifying the dynamic range so that my macro below will work:

View 3 Replies View Related

Copy And Paste Dynamic Range

Feb 14, 2007

i have a range in a worksheet called "worksheet1" i need to copy and paste this into a workbook called "princiapl.xls. the range is dynamic but columns are always the same from A1 to G1 however the rows will change how do i copy and paste this into the other workbook

View 4 Replies View Related

Copy Dynamic Range Without Duplicates

Dec 28, 2007

Basically in sheet 1 column A I have a long list of part codes. This is an ever expanding list so I assume I need to make it a dynamic range. This list has duplicate entries of certain part codes which is fine. I need to keep sheet 2 up to date with these part codes but I don't want duplicates on this sheet. I was then going to use vlookup to derive some but not all information for the part from sheet 1. I would also like the vlookup formula to expand as new parts are added to sheet1 and then subsequently copied to sheet2.

View 2 Replies View Related

Copy And Paste Cell In Different Sheet For Dynamic Pie Chart?

May 4, 2014

I have a sheet that gets updated from external source. For e.g. the B2 cell of sheet updates the date and C2 cell updates the value as on that date from the external link. Since, the value of the cells gets updated every time I open the sheet, I want to copy the value of cells to another sheet in chronological order ,when the file gets opened in different dates, so that I can present data in dynamic pie chart.

View 1 Replies View Related

Sort And Filter Dynamic Range On Different Sheet

Apr 4, 2014

We have 2 dynamic ranges (input, output) on different sheets (sample data below).

Sheet1> Input
Dynamic range 5 columns

Sheet 2>Output
Dynamic range 4 columns
- Include only rows IN=1
- Sorted by LEVEL (BIG to SMALL) and BUY (SMALL to BIG)
- Keep duplicates

What formulas should I place on Sheet2 avoiding Pivot tables or VBA?

Sheet1> Input (16 data rows)
A B C D E
Level Buy Sell Firm IN
16620 4.00 null F1 OUT
16610 5.10 0.80 F1 OUT
16600 11.40 6.60 F1 1
16590 24.50 18.60 F1 1
16580 44.90 37.10 F1 1
16570 66.90 59.60 F1 1
16560 84.40 78.70 F1 1
16550 95.00 90.30 F1 1
16540 99.80 95.60 F1 OUT
16530 100.00 98.00 F1 OUT
16611 6.66 0.497 F2 OUT
16600 9.09 1.96 F2 OUT
16589.1 20 12.5 F2 1
16578.2 41.66 33.33 F2 1
16567.3 73.33 65.21 F2 1
16556.4 90.9 84.61 F2 1
16545 98.5 91.66 F2 OUT

Sheet2> output (10 data rows)
A B C D
Level Buy Sell Firm
16600 11.4 6.6 F1
16590 24.5 18.6 F1
16589.1 20 12.5 F2
16580 44.9 37.1 F1
16578.2 41.66 33.33 F2
16570 66.9 59.6 F1
16567.3 73.33 65.21 F2
16560 84.4 78.7 F1
16556.4 90.9 84.61 F2
16550 95 90.3 F1

View 6 Replies View Related

Link Dynamic Named Range To Another Sheet

Apr 9, 2008

I have a dynamic named range named db in sheet1. I need to have the same range linked to sheet2 starting in cell A1.

View 3 Replies View Related

Formula In Cell To Display No Of Cells In Selection (in A Range) Anywhere In Sheet

Feb 10, 2012

Can I have a formula in A1 cell to display the No. of cells in selection (in a range) any where in the sheet. Just the No. in A1 cell is sufficient

View 4 Replies View Related

2-dimensional Date Range With Dynamic Copy And Paste

May 23, 2007

Some of you may have seen my 2-dimensional Date Range Criteria thread . By request, that thread has been closed and I am opening a new one on a related, but infinitely more complex note.

The solution to the previous thread worked, but not well with my project. I'll go a little more in depth into how my project works, and try not to be too detailed and irritating.

I am trying to create a homebrew Learning Management System for some of the Training courses that my department offers. I've posted here a few times on the same project, and the advice from all previous posts has been excellent.

What I have so far allows users to input all of the relevant information about a participant, and then keep track of the dates when they took a particular course. They input this information with a Userform. This data goes into a Participant Master List, which is where the majority of the functions take place. There is a Workings sheet set to xlVeryHidden, which houses some other information, including results for searches, and finally there is the Report Template--the source of my original question.

The original question was how to make a formula that would track how many people from each department and site have attended training within a date range. That question was answered in the 2-dimensional Date Range Criteria of the report.

What makes it potentially more complicated is that a user might want to generate two or three reports at the same time to compare side-by-side. I'm pretty sure I can make something that will do this, and allow it, but the way it's looking could be really complicated--extreme headache, and a lot of VBA coding.

View 9 Replies View Related

Macro To Copy Dynamic Sheet In New Workbook - Save As Temp / Mail And Delete

Sep 15, 2014

Code to copy the sheet that get selected by if-then-elseif statement and paste in a new workbook, save the workbook as temp, email it and delete it,

sub sending_mail

Dim OutApp As Object
Dim OutMail As Object
Dim rng As Range
Dim DataWB As Worksheet

[Code] ......

View 2 Replies View Related

Dynamic Lookup Formula - Retrieving Result From A Set Of Range From Other Sheet

Sep 27, 2011

I have a query on retrieving the result from a set of range from other sheet.

Query: In the Sheet1 Column B has to take first two words from the
Column A & lookup the matching results from Sheet 2.
(The search range should be the first two words of each cell)

Result: The complete sentance in the Cells (First Two words) should get placed in the Sheet1 Column B

Example: The Expected result should be as mentioned below. (Blue in color should be the results)

Sheet1A BC1NameResults2abc def fkfeabc def words3ghi jkl kikgN/A4mno pqr stu lkasmno pqr must work5
Don't give my book don't give up6vwx yzyvwx yzy not7xwv uts rqpxwv uts yes8omn lkjN/A9ihg fed cbaN/A

Sheet2A BC1Lookup Data2abc def words3xxxghi jkl4yes you have to5don't give up6no you will not7mno pqr must work8vwx yzy not9Excel work10xwv uts yes11omn mre lkj12ihg not fed 13not work14

This is my query

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved