I am filtering a list in Column H and depending on what criteria I filter on I need to be able to select only what I have actually filtered for. I am using the code below to find the lower right corner of my range that I'm trying to select and this works great.
View 3 RepliesI am looking to run a marco for a selection range, and the selection range could vary in size.
Using the Macro recorded (whilst turning on the relative reference) the Macro runs for a defined number of cells. I would like to run certain Macro, for different ranges of cells.
I have three rows that each attempt to pull in data from a range on different worksheets. All but one return nothing but "#N/A" values. The one row returns values from the proper range. (User selections determine which row will have data).
Second, I successfully pull data from the row containing actual information into another row, using the following formula: "=OFFSET(E$36,CHOOSE($Y$1,0,1,2),0)" on a cell-to-cell basis. The value in $Y$1 chooses the row to look at, based upon a dropdown selected on another worksheet.
So I now have a row with =OFFSET(E$36,CHOOSE($Y$1,0,1,2),0),=OFFSET(F$36,CHOOSE($Y$1,0,1,2),0),=OFFSET(G$36,CHOOSE($Y$1,0,1,2),0) and so forth. I can find the last value in the row, but I cannot find a way to extract the address from that, and create a table that will use as a series the last 26 values in the row.
For reference, I use "=LOOKUP(9.99999999999999E+307,E49:FD49)" to determine the last cell with a value (gleaned from a Dueling Excel Youtube Video, - very helpful!).
I hope the above will be clear enough, but if not, I'll be happy to provide additional information / clarification.
I have a log that I use to keep track of my hours where the days hours and charge numbers get summed and moved to a new sheet via a command button. One of the categories is week ending date. I want the week ending date cells to merge if they match and cannot get the range I want to highlight. I can move the data, find and define the first and last cells in the range, but can't get the range.select command to work. I think it is just a syntax error, as I am new to VBA.
I can open a Locals window and watch it assign values to myFirstCell and myLastCell of "$A$36" and "$A$44" respectively, but I get an error on either the set range= or range.select lines.
My code is as follows:
Private Sub Post_Hours_To_Log_Click()
'Posts the day's hours to the hours tracker.
Dim myFirstCell, myLastCell As Variant
Dim myRange As Variant
***Removed N/A code that goes to another sheet and decides which data to copy***
Application.Goto reference:=Worksheets("Hours Log").Range("A2"), _
Scroll:=False
The CRM application that we use provides output in an excel sheet "Table View 1". I want to be able to copy the data that is dumped to a sheet to another sheet. The requirements:The data output range is different. Sometimes it is 4 rows and sometimes it is 25 rows. I want a mechanism where based on the output, the formula/macro automatically copies the information to the new sheet.The first 2 rows need to be excluded when the copy is being made.
View 6 Replies View RelatedI have a spreadsheet where I've disallowed selection of multiple cells using the code in the 2nd box below, but is there a way to override this protection to allow selection of a named range? My reason for doing so is to open this workbook as read only from code in another workbook and copy the entire table. My code for doing that works ok (I frequently use it in other workbooks) but, in this case, my need to disallow selection of multiple cells in this particular worksheet is tripping me up.
This is the code I'm using to try and pull the data into another workbook:
Code:
Workbooks.Open Filename:=ThisWorkbook.Path & "RSL-Jobs-Register.xls", ReadOnly:=True
Application.GoTo Reference:="JobsTable"
Selection.Copy
and this is the code I have in RSL-Jobs-Register.xls which is preventing me from selecting the (dynamic) named range called "JobsTable".
Code:
''' I'm thinking I could have something here like (in plain English) "If selected range "JobsTable" Then"
''' (apply the code below) but I'm not sure of the code
If Selection.Cells.Count > 1 Then
MsgBox "Sorry, operations on multiple selections aren't allowed here", vbCritical
ActiveCell.Select
Exit Sub
End If
The formula for the dynamic named range called "JobsTable":
=OFFSET(Jobs!$A$2,1,0,COUNTA(Jobs!$A:$A)-2,11)
Here is my code piece
================
For pCounter = 3 To OutputWorkbook.Worksheets("abc").UsedRange.Rows.Count
If temp = outputWorkbook.Worksheets(Output). Cells(pCounter, 1) Then
rowToColour = pCounter + 1
outputWorkbook.Worksheets(Output).Rows("rowToColour:rowToColour ").Select
With Selection.Interior
.ColorIndex = 3
.Pattern = xlSolid
End With
End If
Next pCounter
-----------
Explaination
-----------
-I store some numeric value in "temp" variable in some other part of my program
- Then i need to search the "Output" sheet to find the Cell in which i have the same value stored as the string "temp"
- And once i have found the cell , i need to colour the row beneath that cell with red.
The issue is with selection and colouring of the row after finding the cell. So the question is :
Is this the right way to select the row ? i keep getting errors like 1004 etc.
I have data that I need to be dynamically sorted in the highlighted manner. The values on the selection criteria are dynamic.
View 14 Replies View RelatedI have a follwing data:
Sheet1 ABCDEFGH2Days12345673Values2040550000 Excel tables to the web >> Excel Jeanie HTML 4
I have plotted a line graph based on the above table; but I am getting zero values also plotted. since these Values are linked to some other workbook I can't delete the cell values also.
How can we avoid Zero values on a graph; Also is there any approach, that my graph should get automatically updated whenever the linked values are updated.
I will receive one master file which contains the table and it's values and I have another working sheet where I will update the require details. Every time I will copy the entire master data into working file in order to extract the values by using vlookup function. note that the master file has different names each time. So, that if I use vlookup by taking master data path but not getting the results.
I am looking one macro code to select file (master data) and paste the values based on vlooup references in workings sheets. Note this master data file name may change but reference range always same.
I have a range which will change in size & in content, & I want this to be a Named Range at whatever size it is.
Reason I want to is because I want to make a Validation List with this dynamic range. I also want a Validation list which lists the content of 2 or more dynamic ranges which may or may not be on the same worksheet - is this possible?
i.e.
First dynamic range: called "Milestones" at A11
Second dynamic range: called "Activities" at A25
& make a Validation list that will list content of both
Im sorting a dynamic range as mentioned in this Sorting a Named Range. My range is called drWarningTypes and is defined as:
=OFFSET(DataSource!$A$2,0,0, COUNTA(DataSource!$A:$A)-1,1)
When there is only one cell in the range, then running the following sort function includes A1 also in the search (and also adjoining columns).....
I have a column of data that keeps getting new information in it. what i need is a named range that i can use for a chart, first point in the named range will be the first value in the column, second point will be avg. of point 1 and 2, then 3rd point will be avg. of 1,2,3 etc.
View 1 Replies View RelatedI am trying to get to grips with the dynamic ranges for pivot tables. I have named a range data and in the refers to section put:
=OFFSET(Sheet2!A1,0,0,COUNTA(Sheet2!A:A),COUNTA(Sheet2!1:1))
I was hoping that then when i go to data > Pivot table and it asks for the range i could put =Data but it tells me that the range is invalid. I have attached a copy at the bottom.
My searches have not produced anything that I could apply to this situation.
I'm trying to write VBA that would:
1. Search a Workbook for Dynamic Ranges.
2. When a Dynamic Range is found the code would:
A. Determine the current coordinates for the range.
B. Change the "Refers To" value From "=OFFSET...." To "=Worksheet_Name $Column$Row:$Column$Row"
3. Save Changes.
4. Close File.
My apologies but I have very little experience in writing VBA. I understand about variables, arguments, and IF/THEN but just enough to use functions within Excel.
I have a range of data that will grow as the days of the month pass but I need to run calculations on this range. The data is 13 columns wide but the number of rows will increase daily. I remember using a formula in the Define Range that would automatically take into account new additions using the OFFSET function but cannot for the life of me think how exactly to do it.
View 4 Replies View RelatedLine of code that will Select a Named Range in this case I have Named a CELL "DataSummary" Need to use that named range by selecting 30 columns and 54 rows.
Range("DataSummary),(??,??) doesn't work.
I have been working on part of the code for my spreadsheet and it works fine in the spreadsheet “Databaseform” however when I copied the code to my master spreadsheet “Paul_PartLocDBCombo” it does not work, I get the error:
Method ‘ range’ of object ‘_worksheet’ failed
The code is then highlighted in yellow, the code is:
Set rng = wksPartsData.Range("a1", Range("a65536").End(xlUp))
Meaning this part is incorrect but I don’t know why? To work it: go to Databaseform and press start. Enter 7mm in the product field and press find all. It will then return all the matching results in the userform. Its this I want to try and achieve on the other spreadsheet when the button find label is pressed.
A question regarding "AboutRangeSelection" procedure on Chapter 11 in the **, Excel 2003 Power Programming with VBA by John Walkenbach.
View 3 Replies View RelatedI am trying to figure out how to derive a range from a selection. Here is the code i am using to select the table.
View 5 Replies View RelatedI am using Selection.ClearContents command to clear data from column F and G. I know the last row as 230 but the starting row is the first empty cell which I find using Do While loop in range F31 to F230. The variable that stores the first empty cell number is 'r'.
Range("F &r:G230").Select
Selection.ClearContents
VBA IF statement that references the below code. the IF statement would say if the below selection does NOT match 'putname' then
Code:
Range(Selection, Selection.End(xlDown)).Select
I'm looking to go to every 8th cell in a column when I hit the enter key. I was thinking of selecting a small range say from A2 which is zero to A10 which would also be zero then A18 which is zero. The reason being I have a lot of figures to put in to each zero cell then I select "Series" to fill the cells in-between with the incremental figures between the two zeros which would be the difference between the two zero figures.
View 2 Replies View RelatedI was making a simple spreadsheet as I'm taking practice tests for some IT certifications and the spreadsheet I was making was to chart out my progress.
I had a range of scores in some cells and one of the formulas I used so that I didnt have errors in the sheet like div/0 went like the following:
=if(b5:b50="","",sum(b5:b50)) this seemed to work really well for the one section, however I tried to get a little fancy as always and I think I messed something up. Beneath that I tried to separate each practice test with the same sort of formula resulting something like the following:
=if(b30:b40="","",sum(b30:b40)) this however just returned an error #value. I dont understand why the first formula worked and the second didnt. Then again, I'm not really an excel guru, back in college I was really good with it but I dont really remember much.
I'm writing a couple of macros which require selection of a range. The user could either select the range before executing the macro or if range has not been pre-selected, an inputbox should pop-up through which the user can select required range.
View 9 Replies View RelatedI have excel file and need to create a chart with X axis to be scalable, by selecting (from drop down menu) - start and end dates.
View 3 Replies View RelatedI may not have the terminology right, but here's my problem:
With the Range Select Formula i.e.
Here is what I'm trying to do:
1) I have column labels, and row labels on one worksheet which I input into
a function.
2) These inputs should be matched with column and row labels, and then input
into the index function to get a certain cell - let's call it the event cell.
I'm ok with this part. Then:
3) I would like to collect a one column array. The number of cells in this
array should depend on an input from a cell in the worksheet, and the final
cell in the array should be the column label of the column where I am
inputing the formula.
4) The array from 3) should go into the slope function.
5) Then I want to get the second array for the slope function from a fixed
column, but the same rows as in the variable first array, and this should
input into the function.
I have a spreadsheet with data organized into columns in sets of two - the first column is an X value (Pixel number) and the second column is the Y value (pixel density). I'm trying to make a macro that will select the first set of columns, chart it, move the chart to the next sheet, then select the next two columns of data, chart them and move the chart to the next sheet etc. I've gotten as far as having it make the chart and move it, but I can't seem to make it select the next set of columns - I've been trying different things for a couple days now.
Code:
I am trying to use Range.Find in a named range that has some areas where two cells are merged using the format "Center Across Selection"
Set rngTemp = wbMaster.Range("PnLDateRow").Find(what:=dDate)
I get a run time error 438 "Object doesn't support this property or method"
Is it not possible to use this method to find the cell in this range? I tried iterating through the range but that errors also.