Dynamically Changing Csv File Or Macros

May 5, 2007

I am trying to find a way to dynamicly change CSV files .What I want is to add another column to the table with the values that based on the pre programmed parameters. For example if i have A,B,C,D columns and rows 1,2,3,4,5,6,7 I need macros to add values in column E based on the values of column B(for example)
I want to be able to pre-set those algorithms.For example for value 1033 in column B I need macros to insert value 1.25 in column E in the same row,for value 951 in column B I need 0.3 in column E in the same row. Is it doable just in Excel?

View 3 Replies


ADVERTISEMENT

Changing The File Paths In Macros

Jul 20, 2009

I am running the macro below which changes details in my spreadsheet using details from an external table.

Range("C7:E36").Select
Selection.ClearContents
ActiveWindow.SmallScroll Down:=18
Range("C42:E51").Select
Selection.ClearContents
ActiveWindow.SmallScroll Down:=18
Range("C58:E69").Select
Selection.ClearContents
ActiveWindow.SmallScroll Down:=15
Range("C75:E86").Select

If I want to perform this process without having to change the directory to the t drive etc, how do I change the macro? Is there a way, that as long as each of the relevant sheets are in the same directory, i can point the macro there? Ie, as long as all saved together in My Documents or Desktop, the macro automatically looks there?

View 9 Replies View Related

Find Max Value Of Dynamically Changing List

Jun 20, 2008

my file was too big to attach, so to get it, go to [url] (p: SOCIALCHARM [all caps]). It's the only file underneath the 'documents' section.

This is a complex sheet, so I won't go into everything I'm doing, but really just the part I need help with. Instead of trying to explain it abstractly, I'll use a a concrete example (you'll need to look at the sheet to understand this).

The general idea is that I results from an online ad campaign (ie I ran ad X on site Y in position Z), and - given the results I have - try to optimize which ads I run where. Each in the real data (row 167 and below) represents a 'space' where an add can be run.

First, row 551:
The original recommendation is in Column T, which is Brand "Buddies" (column V). The total # so far for brand "Buddies" (col W) is less than the limit, so Column X = 0, and the updated recommendation (Column Y) is just the original recommendation from Column T.

Now, row 552, (the condition I'm having trouble with)
The original recommendation is in Column T, which is Brand "Pink" (column V). The total # so far for brand "Pink" (col W), however, is now OVER the limit, so Column X = 1. This means that excel now needs to search all of the creatives (in column E), filter out all the ones that don't match the size of the current creative in question (ie that are not of size 300x250 - E551), ALSO filter out any creatives of brands that have already hit their limit (in this example, brand "2-in-1" has already hit it's limit, as you could check by looking at X537), THEN, from the remaining creatives (ie those of size 300x250 and not of brand pink OR of brand 2-in-1), select the creative with the highest value in Column AI).

View 3 Replies View Related

Changing The Backcolour Of A Dynamically Added Control

Dec 1, 2007

I'm trying to give a visual indication to a user of whether a combobox has been correctly filled out.

Basically I want the back colour to be red if the value is "Not Used" and green if the value is anything else.

Normally this wouldn't be a problem, I'd just use the combobox's change event to trigger a check, and adjust the backcolour appropriately.

However, the combobox is dynamically added to the form (depending on options further up the form) - and the particular combobox may not always be created.

View 9 Replies View Related

Macro To Select File Name Dynamically

Oct 7, 2007

I have a macro, it imports data from a text file and separates the data from the text file into columns. My issue is that it automatically picks a fixed filename. I would want to manually select a filename from different directories.

Below is my macro: ...

View 9 Replies View Related

Populate Multiple Array Variables With Same Code By Dynamically Changing Array Name

Sep 9, 2012

I am trying to populate many arrays with the same code using something like this. For this test, assume the following data in A1.

1
2
3
4
5

6
7
8
9
10

11
12
13
14
15

16
17
18
19
20

21
22
23
24
25

Code:
Sub populate()
Dim firstArr(5), secondArr(5), thirdArr(5), fourthArr(5), fifthArr(5) As Integer
Dim r, c, num As Integer

[Code]....

The above code does not work of course and falls over. I am unsure whether I should try and concatenate with something like this eg "" & arrName(i) = Cells (r,c) or go down a different route.

View 6 Replies View Related

Changing Picture Using Macros?

Jun 28, 2012

My objective is to change a picture in a cell depending on the previous cell for example

If the number at B1 is bigger than A1, a mouse(example only) must appear below. If B1

View 7 Replies View Related

Automatically Changing Copy Range In Macros

Mar 18, 2009

In my program I have data coming from an outside workbook. The amount of data coming into my program changes (Additional Rows) could be more or less. What I want is for the macro to recogize the change in data size and copy the new amount automatically. ie Change copy range. I would post the program but it is proprietary.

View 8 Replies View Related

Macros Assigned Shape - Colour Changing Code

Mar 13, 2014

I have made several Shapes and assigned macros to them, all is good.

What i am curious about: is it possible to highlight or change colour of the shape on press and return to normal if another is shape is pressed? Just anything to make that particular shape stand out that it has been selected then return to normal when another shape has been selected...

[Code] ....

That is the code so far that is attached to 1x shape...

View 5 Replies View Related

Link To External File With Changing File Name

Jun 12, 2007

Basically I want to point my Excel sheet to a bunch of external Excel files. To get data from an specific cell (in this case, cell F10) of the external file, all I have to do is this: ...

View 9 Replies View Related

Referencing File Name While Changing File Name

Jun 8, 2007

I have a more general question. When doing something such as loading a picture, is it possible to be able to have code which the loading file name changes with a variable. For example, if I have pictures with names 1.jpg thru 120.jpg(all in the same directory) is it possible to write a code that loops and loads the proper image without having to write a section of code for each file name? This would be the directory(C:Documents and Settings muzaDesktopNew DatabaseDatabase Images312312_250) so could I code the filename calls something like this with having picname be the variable which goes from 1 to 180:

.Pictures.Insert( _
"C:Documents and Settings muzaDesktopNew DatabaseDatabase Images312312_250" & picname & ".jpg").Select

View 2 Replies View Related

Changing Reference From Current Years File Data To Blank File Data

Feb 19, 2014

I have a blank file and a data file for current year with formulas.

So I am trying to take a couple of tabs from current year data file and pasting them into the blank file.

My question when is do that all the formulas get referenced to the current years file. i want to keep the same formulas but reference the tabs on blank file.

Is there a quicker way to do this rather and going into all the cells and changing reference from current years files data to blank files data.

View 3 Replies View Related

Keeping Macros With File.

Jan 5, 2010

When I copy/paste an Excel 2003 file containing macros into an email and send and open into another computer, the macros are gone. How can I ensure the macros go with the file?

View 8 Replies View Related

E-mailing A File In Macros

Aug 7, 2007

I have a couple of spreadsheets that I have to mail out monthly to the same recipients and I have figured out how to do that in the macro. However, an Outlook alert pops up warning me that an outside program is attempting to send a message and I have to approve the sending of it. I have tried using the Application.DisplayAlerts = False statement, but that apparently only suppresses the displaying of warnings and alerts in Excel, not the entire Office suite. Is there any way I can make this message go away and just send the e-mails w/o intervention?

Second, I have another spreadsheet which imports data from our UNIX system that I run twice a week. It analyzes, massages and reformats the data, then saves it to a text file, which then gets sent to the same recipients every time. Is there a way to send the text file as an attachment automatically through a VBA macro in Excel? If so, how? So far, I have been able to find help on how to send the entire workbook or a sheet within the workbook, but not a file other than the workbook.

View 9 Replies View Related

Put Together A Set Of Macros That Perform Certain Operations Within A File

Jun 22, 2009

I'm try to put together a set of macros that perform certain operations within a file. However I've got a bit stuck on the following, and I can't see where I've gone wrong:

View 3 Replies View Related

Reduce File Size By Use Of Macros

Jan 8, 2007

I still cant figure out how to write macros. If someone could help me out with this I would appreciate it.

Currently I have a worksheet that is 20mb.

This file contains what takes up most of the space. I repeat this line many times throughout the worksheet.
010807.zip

Once again it is a zero eliminating code.

If someone could reduce the number of formulas for me, I think I could figure out how to adapt it to repeat throughout the sheet.

View 11 Replies View Related

Remove Macros To Email File

Jun 17, 2009

I would like to email an Excel file without the macros so the end recipients will only see the data and not be confused or excited about the prompt to enable/disable macros.

View 2 Replies View Related

Delete Any Macros Which Exist In File With Vba

Oct 15, 2004

Is there anyway in which I can open a spreadsheet and then delete any macros which exist in that file with VBA?

For Example
Workbooks.Open "\sysdevwebwCorpAcctSuiteReportsNetProfit.xls"
''Delete Any Existing Macros Code''
Activeworkbook.Save
Activeworkbook.Close

View 9 Replies View Related

Macros - Changin File Name Results In Bug.

Sep 30, 2008

I have a couple of basic macros that edit formatting in a sheet that I want to send out to various people. The problem is, when I change the file name of the worksheet - the marcos stop working as they refer to the actual original file name.

Could someone please advise if (I am sure it must be somehow) it is possible to emmend the Macros in some way so that they continue to work regardlesss of what the end user decides to name the worksheet.

View 9 Replies View Related

Open File From A Macros To Get Some Data From It

Jul 9, 2009

1- how can i open an xls file from a macros to get some data from it?

2- how can i set a wait function, till i press a special button before macros will be able to continue.

e.g.:
[macros.xla]

View 9 Replies View Related

Moving 2003 File With Macros

Jul 24, 2009

I've created a spreadsheet that I need to share. I've created a custom menu with macros. When I copy the spreadsheet, the macros refer to the original file with an absolute path. Is it possible to copy the spreadsheet to another location and have the macros use that path?

View 9 Replies View Related

Temp File Not Saving Macros

Jan 20, 2010

The form is completed by the project leader, then they hit a Command Button and it's sent to the Senior Manager. After the Senior Manager looks at it and approves it, he then sends it on to Admin (me!) so the project can get set up on all of our systems.
We recently upgraded to Office 2007 (yes, we are a bit late!) and now the Macro that sends the form to Admin no longer works. An example of the error is as follows:
Cannot run the Macro "FY06-10 PROJECTS 19-Jan-10 08-32'EmailtoAdmin.EmailtoAdmin'. The macro may not be available in this workbook or all Macros may be disabled.

Here is the code that I use to send it to the Senior Manager:
Sub MailtoSM()
Dim FileExtStr As String
Dim FileFormatNum As Long
Dim Sourcewb As Workbook
Dim Destwb As Workbook
Dim TempFilePath As String
Dim TempFileName As String
With Application
.ScreenUpdating = False
.EnableEvents = False
End With
Set Sourcewb = ActiveWorkbook
ActiveSheet.Copy
Set Destwb = ActiveWorkbook

With Destwb
If Val(Application.Version) < 12 Then

FileExtStr = ".xls": FileFormatNum = -4143
Else.........

View 9 Replies View Related

Unable To Open Multiple File And Run Macros In It

Dec 20, 2013

I am facing an issue where my macro is unable to open multiple files and run the macros in it. Below is the code that i am using and it stops at boss1.

VB:
Sub allboss()

Call boss1
Call boss2

End Sub

[Code] .....

View 2 Replies View Related

Macros To Change Generated Worksheet File Name

May 2, 2014

I have a file here that already has macros in it. The file is basically a excel document generator.

When you click create sku, the document will generate multiple documents based on the user inputs.

Two things in this file

1) In the generated documents the original "generator" file creates, I need generated files to have column B and D formatted to TEXT, currently all the generated files are formatted to general. (This code is in module 1, line 84 col 34.)

2) The other problem is I need to append the value in Cell N1 in the "sku data entry" sheet to be appended to the generated file names. (this part of the code is is in module 1, line 150 col 28.)

View 1 Replies View Related

Save File By Cell Entry And Keep Macros

Apr 2, 2009

would like to save a spreadsheet with the contents of a cell as the name. My problem is that I have several macros in the workbook and if I change the name of the file when I save, it won't run the macros when I reopen because the filename has changed. It presents me with an error saying it can't find the macro.

View 9 Replies View Related

Open A File Programatically And Disable Macros

Jun 28, 2009

When I have a macro open another file, it always activates the macros in it. Is there some way to disable the macros?

View 11 Replies View Related

Prohibiting File From Opening If Macros Are Disabled?

Feb 23, 2003

I have a file that contains Macros that I want to share with others. The only problem I have is that users have the right to enable or disable macros. If they disable the macro - some of the security functions could be lost.

Is there a way to create a macro that will not allow the file to be opened if they choose to Disable the Macros.

View 9 Replies View Related

Sharing Workbooks With Macros Built In The File

Jan 15, 2014

Is there a way I can share the workbooks with macros built in the excel file?

View 1 Replies View Related

Security Alert This File Contains Encrypted Macros...

Mar 3, 2007

I just loaded Excel 2007, and then opened a workbook I wrote that made pretty extensive use of macros and code. I knew enough to first set up Excel via the "Trust Center" to allow ALL macros to run, against MS's, or more likely against MS's lawyer's, recommendations. btw, does anyone have a clue as to what "Trust access to the VBA project module" is all about? Apparently MS doesn't, for I have searched Help and the KB for it in vain. Anyway, I brought the old xls workbook in, then saved it as a macro-enabled spreadsheet, .xlsm. Then I open it, and uhg, a most distasteful surprise. Even though I specifically went in and set Excel to run all freaking macros, someone at MS has decided I am too stoooopid to make this decision, and all macros have been automatically disabled. OK, so let us click where it says "Options" on this warning bar.

A window pops up telling me that this file contains encrypted macros that have been disabled...". Do a search on that, again, MS, MS kb, even Google, and you are not going to find it (In quotes). There is ONE freaking option with a radio button now, telling me "Help protect me from unknown content" - again, I try a Google search, an MS search and an MS kb search... nothing directly addressing it; but I do the logical intuitive thing - there is a selected radio button there, so click it to unselect it. Click the idiot thing until the cows come home, darn it, it won't do a thing! I even tried an Alt-p as they have the "p" underlined - all that does is select the statement, it remains selected, tap the space bar, hit the space bar, stand on the space bar... First they disable all the macros. OK, I can live with going in and fixing that, but then deciding that I am too dumb to make that choice so don't allow me to turn them on in my own freaking code? Yes, it has been several hours and I am still pissed off beyond belief.

View 9 Replies View Related

VBA Changing File Name

Nov 18, 2009

VBA Changing file name
I'm currently using this code found on Mr Excel

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved