In my program I have data coming from an outside workbook. The amount of data coming into my program changes (Additional Rows) could be more or less. What I want is for the macro to recogize the change in data size and copy the new amount automatically. ie Change copy range. I would post the program but it is proprietary.
View 8 RepliesI have a workbook, with 2 sheets. first page has graphs, second has data. in my charts I refer to a named range on the second one as follows: Data!Named_Range, where "Data" is the name of the second sheet. However when i save this, it changes the range of the chart to: '101044.xlsm'!Named_Range, where 101044 is the name of the workbook. This is a problem for me as this workbook will often be loaded into a document handling system where the file will change name, throwing out all sorts of errors because the chart path is invalid, and i have to change the range of all the charts manually. why does it have to use the file name when reffering inside the same workbook? and how do i force this to not change?
View 5 Replies View RelatedI have a list (formatted as a table) on one sheet that I want users to be able to change. On another sheet there is a table that needs to have every item from the list in the first column. So far I have achieved this by using "=Table2[[#This Row],[Crop List]]" in every cell of the column where I want the list copied. ("Table2" is the list, "Crop List" is the header on the list.) This basically works, but it has some drawbacks:
1) When I try to sort the table, the items referencing the list are stuck in their original positions and no longer match the other columns.
2) I have to have a large number of cells displaying "#VALUE!" at the bottom of my table because they refer to empty cells in the list which might later be filled.
In case my explanation wasn't clear, I've attached a copy of the workbook. Everything I'm talking about is on the first two sheets, "Lists" and "Pricing."
As I copy and past my lookup formula down the page it is changing the lookup range which I think is what is giving me so many #N/A results. My first Formula is
=IFERROR(VLOOKUP(A2,Coors2!A2:D3765,3,FALSE),IFERROR(VLOOKUP(A2,'AB2'!A2:C13944,3,FALSE),(VLOOKUP(A2 ,'WM2'!A2:C4843,3,FALSE))))
Then for instance at line 59 the formula is
=IFERROR(VLOOKUP(A59,Coors2!A59:D3822,3,FALSE),IFERROR(VLOOKUP(A59,'AB2'!A59:C14001,3,FALSE),(VLOOKU P(A59,'WM2'!A59:C4900,3,FALSE))))
I need a macros that can start of with this:
Sheet1
DEFGH50123DAMAGE6
ABCD7
ABCD8
ABCD9
ABC
10
ABC
11
AB
D12
ABCD13..........
I am trying to figure out how to copy a variable range of data from one worksheet to a new one. I have the worksheet part of it figured, but not the range part. How do I define a range to include both columns and rows in VBA?
View 4 Replies View RelatedI have a large workbook with LOTS of large formulas. However they dont contain $ characters before the ranges as I haven't needed to manipulate them til now. Now I am changing the sheet and I cant seem to move or copy these cells without the ranges whithin the formulas changing! Is there a way to do this? If not is there a way in VBA that I can check through selected cellls and enter a $ before all the ranges?
View 2 Replies View RelatedMy objective is to change a picture in a cell depending on the previous cell for example
If the number at B1 is bigger than A1, a mouse(example only) must appear below. If B1
can someone make a code for a range.Name = "match" as soon as active then that active cell is to be copied to cell C2.
View 9 Replies View RelatedI am running the macro below which changes details in my spreadsheet using details from an external table.
Range("C7:E36").Select
Selection.ClearContents
ActiveWindow.SmallScroll Down:=18
Range("C42:E51").Select
Selection.ClearContents
ActiveWindow.SmallScroll Down:=18
Range("C58:E69").Select
Selection.ClearContents
ActiveWindow.SmallScroll Down:=15
Range("C75:E86").Select
If I want to perform this process without having to change the directory to the t drive etc, how do I change the macro? Is there a way, that as long as each of the relevant sheets are in the same directory, i can point the macro there? Ie, as long as all saved together in My Documents or Desktop, the macro automatically looks there?
I am trying to find a way to dynamicly change CSV files .What I want is to add another column to the table with the values that based on the pre programmed parameters. For example if i have A,B,C,D columns and rows 1,2,3,4,5,6,7 I need macros to add values in column E based on the values of column B(for example)
I want to be able to pre-set those algorithms.For example for value 1033 in column B I need macros to insert value 1.25 in column E in the same row,for value 951 in column B I need 0.3 in column E in the same row. Is it doable just in Excel?
I want to automate the following steps when cell A8:A11 changes in sheet "InfoAA":
(1) clear contents and formats of cells A1:A4 in sheet "InfoBB"
(2) copy cells A8:A11 of sheet "InfoAA" (which are formulas) and past it as text in cells A1:A4 of sheet "InfoBB".
(3) then automatically run a recorded macro named "BoldFirstName"
See attachment.
I have a workbook with 2 - worksheets "DATA" and "LETTER".
The "DATA" sheet has columns "First Name" "Last Name" "Address"...etc.
The user can enter in either a "X" or a "x" in cells B6:B100 on the "DATA" worksheet.
After the user enters a X or x and hits the macro button I need it to copy certain cells from "DATA" worksheet to "LETTER" worksheet. I have listed a example below.
In this example if a "X" or "x" is entered into B6 on "DATA" worksheet and the macro button is hit, then: ....
I need help with creating a macro that runs when a user enters a value in the 'Numbers' column, copies and pastes data in the corresponding worksheet 'Worksheet' column by the value of 'Numbers' column data. An excel file is attached.
View 6 Replies View RelatedI have made several Shapes and assigned macros to them, all is good.
What i am curious about: is it possible to highlight or change colour of the shape on press and return to normal if another is shape is pressed? Just anything to make that particular shape stand out that it has been selected then return to normal when another shape has been selected...
[Code] ....
That is the code so far that is attached to 1x shape...
I have a macro created that at the mo is assigned to a button. But I would like the macro to run as soon as the spreadsheet is opened.
View 9 Replies View RelatedWhat I do know is how to set up a task in Task Scheduler and I have it set to open my Excel file: Workbook1.xlsm. This task is set to run at 7am each morning. Workbook1.xlsm has a bunch of different macros in it.
What I'd like to do is to have each of those macros to run automatically when the file is automatically opened by Task Scheduler.
I have this simple code which runs a macro from a dropdown list.
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$A$1" Then
If Target = "RunMacro1" Then
Macro1
End If
End If
End Sub
Im trying to add this second dropdown list.
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$A$2" Then
If Target = "RunMacro2" Then
Macro2
End If
End If
End Sub
Can't seem to add a second Worksheet_Change event, nor include the second code within my first.
I have been trying to think of a way to get a hierarchy chart automatically with given data through macros
In the attached excel sheet
Org. Charts (hierarchy) question.xlsm
Would it be possible to get the chart to do by itself if say I were to add items or remove items? Is there any way to do it for data automatically?
I extract the data from primavera as attached and I want to make the chart in excel automatically.
the system i'm creating involves many user ... some may know how to decode the system esp. on the startup ... if they click disable macro they can view, edit and delete important data in the system ... can somebody guide me on how to automatically enables macro on excel file on startup???
I've tried:
- setting security to low - but got auto reset by administrator.
If a user disables macros when opening a file, is there a way to have the excel file automatically close?
I am using a macro that automatically updates data obtained through a DDE link at 5 second intervals. My code is based off of the article "Automatically Run Macros at a Set Time or Date" found on the Ozgrid FAQs found here: http://www.ozgrid.com/Excel/run-macro-on-time.htm
However, I have this macro execute when I activate a Form Button, not when the workbook opens. So far, this macro works perfectly, and I have no problems. Although, I'd also like to include a Form button to STOP the macro from automatically running if the user chose to do so. How exactly would I go about making this STOP button?
In the following sheet I'm tracking daily numbers against a monthly total. In the cell E4 for example I have a minimum per day number needed which is based on the monthly goal divided by the number of days availble to work. What I would like to be able to do is have the number auto-adjust if a letter (i.e. V=Vacation, S=Sick, etc...) is used in place of a number on any given day.
I have been using the following to change the year in the Header
Code:
Sub Change_Format()
' Ctrl-y will change the year per individual sheet
ActiveSheet.PageSetup.RightHeader = Format(Now(), "YYYY")
End Sub
Is there a way to have this done automatically? There are absout 6 sheets in the workbook that have the year in the header and right now the code is in Module 3 and I have to press ctrl+y for every sheet.
How do I stop my sum formula from adding to it's range every time I type a number in? I have 12 columns of numbers by date and 4 quarter columns at the end totaling each of the 4 quarters. If I start typing directly across, the 1st quarter sum formula updates to include every number in the first 12 columns. The other quarter column sum totals stay the same.
View 7 Replies View RelatedI have 2 Excel Files. In the main file I have a macro that copy/pastes data from the secondary file. The secondary file is a daily file that gets its file name changed every day (eg. 14OCT09.xls).
The last piece of the Macro goes back to the secondary file and ends with:
Windows("14OCT09.xls").activate
Range ("A1").Select
Now tomorrow, I have to manually edit the Macro and change the code to 15OCT09.xls before I run the Macro. Is there a way to automatically change this date without having to manually edit it on a daily basis?
I'm designing a spreadsheet currently. I want to input a number into cell A1 - for example 13. Now the number 13 has a percentage value of 67.3%. When I enter the value into A1 I want excel to automatically fill cell A5 with the percentage value of 67.3%.
I need to have the numbers from 1-20 all with varying percentage values.
1 = 100%
2 = 97.8%
3 = 94.3% etc..
So essentially I would like to enter 13 into cell A1 and for cell A5 to automatically fill in the value of 67.3%, if I was to change the value in A1 to 10 it would also automatically change the percentage from 67.3% to 74.7%..
I am writing/creating macros and I want to create one that will automatically run when a cell value is changed to a certain entry.
View 2 Replies View RelatedI m trying to get around here within the company I work for.
I'm interested to know how to set a specific range value e.g. "5 to 10" once a value is between those 2 numbers, and then if the value in the next row below is 34.12 it will be "30 to 35".
Here's an example code I constructed, but the darn thing just keeps on running
VBA code that would update a chart automatically as you change the inputs which are located in cells in excel. The inputs are located in cells B5:B9 and i want a code so that as you change these numbers the chart would automatically update.
View 1 Replies View Related