When Using Custom Views - Get Error Message
Aug 13, 2014
I have created a report with 22 sheets as different pages to be included or hidden depending upon the type of report needed. I had found several sources saying to use the Custom Views function. So for example I will unhide all the sheets and add as a Custom View "All Sheets" and then whittle it down to the 5 I might need for B type inspections and add that view as B Inspection. But when I try and toggle between them I'm getting an error message that says "Some view settings could not be applied" - and thew saved view I was looking for is not the same sheetwise.
View 1 Replies
ADVERTISEMENT
Aug 31, 2006
I have a userform with a combobox (cmbSearch) , a textbox (textbox1) and a listbox (listbox1)....and a commandbutton (cmbFind). This userform is used for searching records in my worksheet....where user selects a "Search By" category from the combobox and then enters relevent text search criteria in the textbox....and all the search results are shown in the listbox. This part works fine untill someone tries to search a "non-existent" record. e.g. a customer name thats not in the database and it gives an error. I would incorporate in my code to have a Message box pop up on these type of searches saying "textbox1.value Not Found!" insetad of error message.
Private Sub cmbFind_Click()
Set c = Range("a65536").End(xlUp).Offset(1, 0)
'write userform entries to database
Dim DataSH As Worksheet
Set DataSH = Sheets("ComplaintData")
With DataSH
.Range("L1").Value = cmbSearch.Value
.Range("L2").Value = TextBox1.Text
.Range("N1"). CurrentRegion.Clear
.Range("A1").CurrentRegion. AdvancedFilter Action:=xlFilterCopy, criteriarange:=.Range("L1:L2"), copytorange:=.Range("N1")
End With
lstSearch.RowSource = vbNullString
lstSearch.RowSource = "outdata"
End Sub
View 5 Replies
View Related
Apr 19, 2007
I'm dealing with a spreadsheet that uses custom views. Before I do anything with it, I want to make sure that there is no custom view enabled (e.g. just display all). I've tried Chip Pearson's ThisWorkbook.CustomViews("View1").Show suggestion, but it just throws "Runtime Error 5: Invalid procedure call or argument". My actual code is: ThisWorkbook.CustomViews("All (Est)").Show
View 7 Replies
View Related
Jun 8, 2007
I setup custom views for my worksheet
I dragged the custom view command to my menu bar
Everything works great on my machine
But I would like to send to other users and for them to be able to use the custom views w/o having to help them setup on the menu bar
Plus I've had problems in past where custom view tool is not persistent on the menu bar
Sometimes there, sometimes not
Is there a way to add to say cell A1 on the worksheet instead?
View 3 Replies
View Related
Aug 27, 2007
Below is a macro I recorded to help copy 'Paste Special - values only' data between two spreadsheets that have different colour and conditional formatting in cells.
However, if this is run and there is no data to paste, it throws up the End and Debug error.
Any chance that someone knows that if there is no data sitting on the Clipboard, then a msg box would appear saying "Please select the data you require to be copied" in the message box.
Sub data_input()
ActiveSheet. Unprotect
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Range("B5:AG4804").Select
Selection.sort Key1:=Range("B5"), Order1:=xlAscending, Header:=xlGuess, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal
Range("B5").Select
ActiveSheet.Protect
End Sub
View 4 Replies
View Related
Sep 14, 2012
I am trying to use a checkbox to control the custom views that i have set ("Normal", "Hide") However after i entered it in VBA, it just does not work. After i check or uncheck the checkbox, it just keep going back to the "Normal" view.
Sub CheckBox1_Click()
If CheckBox1 = True Then
ActiveWorkbook.CustomViews("Hide").Show
Else
ActiveWorkbook.CustomViews("Normal").Show
End If
End Sub
View 5 Replies
View Related
Aug 26, 2006
I have a large spreadsheet that I am managing and there are many users who access this for information. Because of this, we have all created "custom views" for our departments.
I continue to struggle with how to save changes in these custom views. Yesterday, I added and moved some columns to the spreadsheet and now all the custom views are messed up. The only way we have been able to work through this is deleting and creating new views.
View 9 Replies
View Related
Jun 12, 2008
I have a spreadsheet with four columns of data for every month (i.e. January has a Prior Year, Budget, Outlook, and Actual column). I have been trying to come up with a macro or form that will allow me to customize which columns I would like to see and hide the rest. For example, if I chose to see the Budget and Actual columns, it would hide the Prior Year and Outlook columns for each month.
View 2 Replies
View Related
May 17, 2008
I cannot figure out how to get my error handler to work, or actually, not work. It seems to work fine when there is an error, but the code still gets read even when there was not an error. Basically, I am trying to open a file, which may or may not be there. When it is not there I want a message to pop up informing the user. However, when the file is there and it opens, the error handler still gives the message box. Any ideas what I am doing wrong?
Private Sub btnOK_Click()
Application. ScreenUpdating = False
Dim LCSfile As String
LCSfile = frmSelectFile.Listbox1.Value
On Error Goto ErrHandler
Workbooks.Open Filename:=sPath & sDate & "" & LCSfile & "QUANT.CSV"
ErrHandler:
MsgBox ("File is not quantitated. Please select another file.")
Application.ScreenUpdating = True
End Sub
View 2 Replies
View Related
May 20, 2009
I am looking for a more efficient way to write a macro (a sample from the macro is below). This is just the first part of the macro. I need to repeat these same steps (seen for row 5 below) for rows 5 to 50. My script worked until I hit row 35 and then I got the "compile error.." message. There must be a way to use "loop" to write this more efficiently, no?
View 14 Replies
View Related
Feb 24, 2014
I have four cells c1 thru c4. The SUM of these cells must equal 1. I want to display an error message "sum of cells not equal to 1.0" but only when data has been entered in all four cells.
For instance =SUM(C1:C4, "<>1") should display the error message. Is there a way to write the formula with an IF statement and still use data validation with error message box?
Assumptions:
-Will ignore blanks
-Error message "Sum of cells are not equal to 1.0" until values in all four cells have been entered, not after a value is entered in a cell. (validate expression after all four cells have values or blank)
Scenarios:
c1 = .25, c2 is blank, c3 = .25, c4 = .50 TRUE no error message should displays
c1 = .25, c2 = .25, c3 = .25, c4 = .50 TRUE no error message should displays
c1 = .25, c2 = .30, c3 = .25, c4 = .50 FALSE error message should display after value is entered in c4
etc
What I don't want is for the error message box to display after .25 is entered in c1 because the user is still in the process of adding values. Can this be done using Data Validation in Excel 2010?
View 2 Replies
View Related
Aug 17, 2008
For some reason my form won't open when the workbook is opened. I get an error message "run time error '424' object required" (which happens when I have Form1.show in the BOTH workbook_open event and the userform_initialize event (oops)). When I removed form1.show from the userform_initialize I don't get an error but I also get no form. I recall having this issue before but I can't recall how to fix it.
Can I call the userform_initialize event from the workbook open event to get around this successfully and properly?
View 9 Replies
View Related
Nov 2, 2007
I do hit the SCE (Shift-CTRL-Enter) keys. The formula does work in one workbook, but not the other. The only difference between the two workbooks is this formula has a larger range.
New Formula- doesn't work (ERROR- #DIV/0!)
{=AVERAGE(IF(Sheet1!A3:A1094="MONDAY",Sheet1!E3:E1094))}
Old Formula- works
{=AVERAGE(IF(B6:B451="MONDAY",E6:E451))}
View 9 Replies
View Related
Jul 16, 2008
When I input the formula : =(G9+G16+G23+G30+G37+G44+G51+G58+G65+G72+G79+G86+G93+G100+G107+G114+G121)/17
I get the error message #VALUE!
View 9 Replies
View Related
Apr 24, 2009
I created a bar chart with horizontal (category) labels: winter, spring, summer, fall. Y-axis label is percent. For each category there is data for blk rats, Norway rats, Mice. For each species and category the standard error is different because it is based on several years of data for a given season.
When I try to display the std. error (using custom, fixed value) it treats each species as a series and only lets me choose one value. in other words the std. error would be the same for blk rats in winter, spring, etc. How can I use the individual values?
View 4 Replies
View Related
Jan 11, 2009
I have one line of code that I need an error message for:
View 2 Replies
View Related
Feb 3, 2014
I get spreadsheets sent to me with hours and minutes in decimal format. Frequently a quarter of an hour or three quarters of an hour are posted as 0.15 or 0.45 instead of 0.25 and 0.75. Other odd fractions can also appear.
I want an error message if the value when divisible by 0.25 is not a whole number.
View 6 Replies
View Related
Dec 15, 2006
I am trying to run the macro and I get this error:
Compile Error! Sub or Function not defined
for the following
RFQnum = VLookup("RFQ Number", CPARSdata, 2, False) 'RFQ# should be same for each supplier
CPARSdata is a named ranged with 25 columns and 338 rows
View 9 Replies
View Related
Dec 28, 2006
I would like to get some information when a vba code is in error.
Can we create a sub that we can refer to when a vba code is in error. Something as:
On Error goto "name of the sub"
In that sub, I would like to write in sheet1 , cell a1 the name of the sub in which the code is in error.
In cell a2, i would like to write the line in error in the VBA code.
finaly i would like to show a msgbox ("Contact your admin")
and then close the file
View 9 Replies
View Related
Jul 17, 2007
I am getting the error message
"Compile Error: End If without block If" for the code below :
ErrorHandlerRoutine:
If MyInteger = 1 Then
MsgBox "Data does not exist in the CO2 data set"
End If
Resume 1
If MyInteger = 2 Then
MsgBox "Data does not exist in the Water data set"
End If
Resume 2
If MyInteger = 3 Then GoTo 3
MsgBox "Data does not exist in the Waste data set"
End If
Resume 3
View 9 Replies
View Related
Jul 29, 2008
I need an error message to pop up if 3 cells contain the same data
The range of these cells would be G19 to G49
Ideally the error message would say "Rules Broken"
Also if possible could the same message be shown if the value of cell J52 exceeds 50,000000
View 9 Replies
View Related
Jun 11, 2009
I wanted to make a pop up alert message appear whenever the formula in a cell gives a particular output.
Before posting this i tried looking for similar posts before, but the ones found do not solve my problem. There it asks me to write the following code in VBA,
Private Sub Worksheet_Change(ByVal Target As Range)
Dim MyRange As String
MyRange = "A1"
If Me.Range(MyRange).Value = "Have Meeting" Then
MsgBox "Have Meeting"
End If
End Sub
But my doing so, I can not use any formula in the cell A1 or any other cell i give reference as MyRange. I will always have to physically type "Have Meeting" or any other word assigned in the above.
View 9 Replies
View Related
Aug 24, 2009
I am writing some code to do a comparison between two cells X2 or AB2 with an X which checks to:
1. make sure one of the two are filled, or
2. both are not filled.
Below is an extract of the spreadsheet I am working on. I need to check to make sure one of the boxes is checked. If both are empty or both filled with an ("X"), I want a message box to tell me to correct the error and stop the macro from continuing. If only one is marked with an ("X"), I want the macro to continue but don't know how.
RSTUVWXYZAAAB
2IN PROGRESS: COMPLETED:
View 9 Replies
View Related
Dec 28, 2009
Using Excel 2003
I am receiving an #Value! error message from my sumproduct formula:
=SUMPRODUCT((Data!$A$2:$A$47=G$2)*(Data!$B$2:$B$47=G$4)*(Data!$A$1:$N$1=$B21)*(Data!$A$2:$N$47))
As follows:
Data!$A$2:$A$47 is a date
G$2 is a date within the context
Data!$B$2:$B$47 is a unit number
G$4 is a unit number within the context
Data!$A$1:$N$1 are descriptive titles
$B21 is a decriptive string within the same context (copy paste)
Data!$A$2:$N$47 are to be summed is all criteria are met.
View 9 Replies
View Related
Jun 7, 2006
I have a vba code that I wrote out to search for a file and update data on a spreadsheet with the new file... however I've come to a point where I'm not sure of what code to use. If I search for a file that is not there I get a runtime error and of course it ask me to end or debug. What I would like for it to do instead is search for the file and if it is not there... display a message box stating that the file searched for is not found and automatically closes the workbook after OK is pressed.
Here is the code for those who may need it....
View 7 Replies
View Related
Jun 10, 2006
I've got the below code which I use to log users who opens my spreadsheet. It's a Event so runs when the spreadsheet is open with macro enabled. The spreadsheet is on a shared drive which has the prefix "K". Most users it works find but one user gets a error Message "Path or Drive" error. I got around it by adding "on error" but how do you overcome issues with drive prefixs and the drive address e.g "K" vs "\CRD2000"
Private Sub Workbook_Open()
Open ThisWorkbook.Path & "usage.log" For Append As #1
Print #1, Application.UserName, Now
Close #1
End Sub
View 4 Replies
View Related
Jun 21, 2006
I have developed a program in which the user will only see the userforms (and to an certain extent not even be aware of excel doing most of the work).
i am looking for code that will intercept an error message should something go wrong in my vb code. Currently when an error occurs, it pops back to VB and gives the error message. I want it to rather give a popoup message asking the user to contact me.
View 3 Replies
View Related
Mar 21, 2007
i'm coping a file over itself and i get an information message "File cannot be copied onto itself" - An attempt to copy a file could not be completed because the file already exists or same source and destination.
i would like to surpress this, i have tried the following, but to no avail:
Application.DisplayAlerts = False
Application. ScreenUpdating = False
Application.Interactive = False
?
View 3 Replies
View Related
Mar 12, 2007
I have a custom toolbar containing several buttons which run several macros. Works fine except on exiting the programme and re-opening the workbook, if I try to use the custom buttons I get an error message which tells me it cannot find the ' name of workbook, name of macro' macro I then have to re-assign the macro which has been there all the time but without the file name in front of it.
View 7 Replies
View Related
Mar 2, 2014
This formula might be the problem for the error message.
SUMPRODUCT((MOD(COLUMN(C3:CO3)-COLUMN(OFFSET(C3:CO3,,,1,1)),3)=0)*C3:CO3)
I have other cells with the same formula (but with different range i.e. D3:CP3), yet it doesn't have circular reference error message.
View 2 Replies
View Related
