i am getting an error when trying to hyperlink from one page in a workbook to
another page in the same workbook. the error simply states that "cannot open
the specified file"
is there a way to fix this???
I am having problems in Excel 2007 using hyperlink formula to jump to a different worksheet in the same workbook.
Filename: Model Variables.xlsx
Worksheet to seek: Org Structure
Cell to seek: A1
Formula tried: =HYPERLINK("[Model Variables.xlsx]Org Structure!B4", "My Cell on different sheet")
Error: Reference is not valid
I am using the code below to send emails from my Outlook Express. The code is working fine. Recently, I added additional email addresses into this code. When I did, I got an error message. The error message is below. Please help me modify this code or propose an alternative because I need to send out many emails. I prefer not to use Outlook unless I have got no choice....
View 5 Replies View RelatedI am automatically generating a hyperlink to another document. The link that generates is: (I don't know if this qualifies as code, but I'll tag it anyhow...)
06-09-05 0000020 Name/06-09-05 0000020 Name.xls# 'Notes'A5
with 06-09-05 0000020 Name as a directory off the current App.path, and 06-09-05 0000020 Name.xls being the name of the file in the directory. It does have a sheet called "Notes". The thing of it is, the hyperlink takes me to the right place, it just gives me an error message every time saying "Reference not valid". How can it be taking me to the right place, and still giving me the error?
I'm trying to build a hyperlink using text formulas in Excel but I get the following error message: "Unable to open [link]. The internet site reports that the item you requested could not be found. (HTTP/1.0 404)". The strange thing is that if I copy-paste the link in the web browser, the page opens normally (which proves the link is correct).
View 4 Replies View RelatedI have this code that looks through my worksheet once the conditions are met it will email, and in column "M" I put a hyperlink to where the document is stored. All works as far as the email format, even grabs the hyperlink but it’s not clickable in the email.
Here is the code.
I am outlook 07 and vista 07.
Option Explicit
Const Startingrow = 11 'Data starts on row ##
Const AlarmDelay = 183 'send warning
Sub CheckTimeLeftFac()
'References needed :
'Microsoft Outlook Object Library
Dim i As Long
Dim j As Long
Dim msg As Long
Dim Lastrow As Long
Dim WhoTo As String
Dim SubjectLine As String
Dim MessageBody As String
Dim olMail As Outlook.MailItem
Dim olApp As Outlook.Application
Dim strLink As String
I have hyperlinks betwene one worksheet to another - they only only hyperlinked thourh column & rows (eg: A100) etc. How can I lock these hyperlinks but still allow users to insert new rows without losing their place?
View 2 Replies View RelatedI am having a slight problem copying hyperlinks. I have written some code that sorts data by date and then creates a simple diary. It originally placed the name of the event in the new diary sheet. What I would like to do is instead of copying the name into this new sheet copy a hyperlink that I have created to the company's website for that event.
I can create the hyperlink using hyperlink(B1,A1) where A1 is the company name and B1 is the web address but since the new sheet will not have the underlying data I need to actually copy the values and format of the hyperlink rather than the formula.
Error Check Marco.xlsm
see attached example. I am trying to write an error detection routine that iterates through worksheets that have numeric values for names (ignore text names or alphanumeric). Macro checks range on each numeric worksheet E3:E33 and is supposed to report back on the SummarySheet if any value other than 1 or 0 is found in range E3:E33 on any numeric-name worksheet. Code as follows:
[Code] ....
Problem is that it just reports EVERY worksheet as having an error when clearly most don't (none do I think in the attached example).
Try changing some of ranges E3:E33 to values other than 1 or 0, it still reports all sheets. Why the macro does not evaluate the range E3:E33 properly and just reports every worksheet as having an error?
See the attached sheet. I am trying to add together two figs which are linked to calculations which have formula built in to stop error messages when there is a 0 / 0 = #value type error. However when these two cells are added, if the cells are blank I get an error message. And if only one cell has a value, I get "" with my existing formula. what I need to do to get a result of 7 if for example cell A4 = "" + B4 =7. At the moment my formula shows "" in the sum total of these cells
View 5 Replies View RelatedOK, so I have a userform with some text boxes that I have specially formatted to accept only date values in the form of mm/dd/yy. By default they are blank. I have a check in one of my codes that looks like this
Code:
If DateBox vbNullString And DateValue(DateBox) > checkdate Then
M1 = "NEOPRENE" & Chr(13)
Else
M1 = "" & Chr(13)
End If
Where DateBox is this specially formatted TextBox and checkdate is a future date being checked against.So if DateBox has a value in it AND that value is greater than the date being checked against the returend string is Neoprene, otherwise it is blank.
Well the problem I have is when the first condition returns FALSE, i.e. when DateBox is empty, the DateValue half still gets evaluated and returns a type missmatch error or something like that because DateValue("") returns an error. I have line of code 8 times, one for Neoprene, squeegee, etc. So the name of the text boxes are each unique and I am using M1, M2, M3, etc.
For other reasons, use of "On Error Resume Next" doesn't work for this situation because it causes a result opposite to what I want to happen.
the if stattement works perfectly and does exactly what i want except when it comes to the else part. if there is no error the statements are run perfectly but if there is an error (in this case the error is generated when a match cannot be found in the spreadsheet) the else statement doesnt kick in and post the msgbox.
the code just crashes. and returns an error 1004 on the line i have highlighted in yellow
res = WorksheetFunction.Match(invvar, Columns(1), 0)
If Not IsError(res) Then
Me.txtClientID.Value = ws13. Cells(res, 7)
Me.txtNumber.Value = ws13.Cells(res, 7)
Me.txtDate.Value = ws13.Cells(res, 8)
'save client id as a variable
'Print to invoice------------------------------------------------------------------.....................
I am trying to run create a simple macro that copies and paste special values - something I have done 100's of times but for some reason I keep getting an error message - even though I recorded the macro and didnt write it by hand - see below:
Sub Macro6()
Cells.Select
selection.Copy
selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
End Sub
For which I get 'Compile Error - Expected Function or Variable'
I have some code that, although works fine in Excel 2003, does not in Excel 1997. I receive this error when I try running it:
COMPILE ERROR:
NAMED ARGUMENT NOT FOUND
Sub HPVAL()
Dim r As Range, myStr As String
myStr = "HP"
Set r = Cells. Find(What:=myStr, After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False)
If Not r Is Nothing Then
r = r.Value
While Not r Is Nothing
Set r = Cells.FindNext(r)
If Not r Is Nothing Then
r = r.Value
End If
Wend
End If
End Sub
It looks like Excel is getting hung up on the "SearchFormat:=" portion of the code.
So the issue I am having is that I have a worksheet with two long rows of value. If the user enters the incorrect value, the program gives a error case of 1004. If and when this error occurs I want the program to send a MessageBox to the user then end the program. The problem that I am running into is that whenever I write On Error Goto... It Goes to the label whenever any runtime error occurs. My belief is that there has to be a way to only check for a runtime error on a single line of code rather than the entire sub.
View 3 Replies View RelatedI have written a Excel (2003) that searches a worksheet for a string in any cell. If the string is not found, it uses the 'On Error GoTo' command to jump to a given label. It works fine on the first string not found. When it searches for the next non-existent string, it fails with:
'Run-time error '91':
Object variable or With block variable not set'
Do I have to clear a buffer after each cells.find search?
My
I am looking for a more efficient way to write a macro (a sample from the macro is below). This is just the first part of the macro. I need to repeat these same steps (seen for row 5 below) for rows 5 to 50. My script worked until I hit row 35 and then I got the "compile error.." message. There must be a way to use "loop" to write this more efficiently, no?
View 14 Replies View Relatedwhether I can handle errors in a way that tells me which object caused the error?
For example if a userform has two combobox's and one causes an error, can I return to a message box containing the name of the object (combobox1 or combobox2)?
I have tried returning err.source but I am either not using it correctly or it isn't intended to be used this way.
I'm getting the error for the following piece of code.
Sub itconfandscratch()
Dim Cn As ADODB.Connection
Dim Server_Name As String
Dim Database_Name As String
Dim User_ID As String
Dim Password As String
Dim SQLStr As String
Dim rs As ADODB.Recordset
Set rs = New ADODB.Recordset
Server_Name = "sturecord"
Database_Name = "Scratch" ' Enter your database name here
SQLStr = "SELECT stuname FROM dbo.sturec" ' Enter your SQL here
Set Cn = New ADODB.Connection
Cn.Open "Driver={SQL Server};Server=" & Server_Name & ";Database=" & Database_Name & ""..............
the spreadsheet needs to be copied to a directory called "C:downloads" as it contains a ODBC query to itself (In reality, this is a query to an External Oracle Database)
On loading, it should pop up a simple userform, with a combo and two command buttons, which when pressed takes you to a (hidden) tab that displays a pivottable.
All works well until I try to close /save when 60% of the time, Excel encounters problems and closes and will not load up the file the next time until either quit excel or disable macros. Messages include "file/path access error", "I/O Error" or get restarts excel.
On a casual run through, I expect you might report back that "All worked ok for me". Please can you give it a bit of a thrashing, comment out the userform show, save the file (frequently) becuase i assure you it will break ultimately!
This is a brand-new file and I've tried it on about 5 different PC running different versions of Excel and generally get the same result.
my lookup isnt returning the correct data- already tried sorting it doesnt work im pretty sure ive put in the correct formula
View 6 Replies View RelatedI have a very simple spreadsheet that generates a "backing page" for items to be physically pasted to (essentially nothing more than printing a header). I have the following code under "This Workbook" to avoid being prompted to save changes when closing, as this spreadsheet is just a template and changes should not be saved...
Private Sub Workbook_BeforeClose(Cancel As Boolean)
ActiveWorkbook.Close False
End Sub
The code does as is intended, but, if any other spreadsheets are open at the same time, I get an error message pop-up saying "EXCEL has encountered an error - an error log has been generated"... Excel then shuts down. So, first question; where should I look for the error log?
VB:
Selection.FormulaArray = _
"=IF(RC[-7]=""Weekly"",RC[-1],IF((ParentCode=RC[-10])*(ClassType=""Active""),IF((EndDate=EOMONTH(EndDate,0))*(RC[-7]
={""Monthly"",""Quarterly""}),RC[-1],0),IF(RC[-7]=""Daily"",IF(SUMPRODUCT(((ParentCode=RC[-10])*(FundType=""C"")*
(ClassType=""Inactive Class"")*(TermDate<>"""")*(TermDate>=StartDate)*(TermDate<=EndDate))+((ParentCode=RC[-10])*
[Code] .....
I recorded macro for this formula its giving me syntax error i did " _" after the break but its still not working..
Before I go into details I am working in one workbook with several worksheets(Tabs) in the workbook. I have three Buttons on one tab. the button I am having trouble with is the third. I want to insert a column in a separate tab that contains approximately 87,000 rows of data. I then want to do a row count and select the empty cells in the inserted column and put a formula in there. I have tried a loop VBA code and it works, but it takes about 30 minutes to run all the way through. The underlined portion is what is higlighted with error 1004: Application-defined ro object-defined error. I am not sure how to fix this. This is what I have now:
View 13 Replies View RelatedI imported some data from an MDB file while working at home. created a macro to that effect. and it works fine at my home PC. but when i try t execute this macro on another PC or work place, then it gives error #13. i dont understand why. something is wrong with the code. i think it is the "WITH" code for query tables connection giving error ....
View 9 Replies View RelatedI'm trying to copy an ELOOKUP formula down a column in a sheet. The formula is losing part of the table array when I carry it down and returning an N/A error. Interestingly, it will work when I copy it across a row.
View 9 Replies View Related"Compile error - Syntax Error"
and the following line highlighted in yellow
"Sub CreateWorkbooks()"
It worked on Excel 2000 but not now and dont work either in Excel 2007.
Heres the complete code .....
I have a VB function in a worksheet that requires data from a workbook that is not under my control. The problem is that the workbook does not always have complete data. Often cells are filled with #VALUE, when this occurs I need a way to tell my VBA to assume a value of 0. I have tried using if(cell="#VALUE", 0,cell) but to no avail. any suggestions?
View 7 Replies View RelatedI am trying to do is have a hyperlink go to another sheet after searching the second sheet for the same value. I have a sheet labeled "IQI" which has the total number of cases for a certain condition. I have another sheet labeled "IQI Cases" which lists out each case individually.
I want to be able to click on the Condidion in the IQI sheet and have that take me to that specific spot in the IQI Cases sheet where the cases for that condition begin.
Right now I just have a simple hyperlink to a range of cells. But each month a report is generated and the range will be different and I have to go and change the range each time. So I guess I want a hyperlink and a lookup function combination.
I dont know if this would be a Macro or a formula.
I am trying to use hyperlinks to navigate documents. I created a html document with excel and used hyperlinks to PDF documents.
At first the hyperlinks worked fine, opening the PDF software and in turn the PDF document.
Now when i click the hyperlink in Internet Explorer for the PDF document to open, it brings me to a blank HTML document.
In other words, the hyperlinks to the PDF's no longer open the PDF software and document.