The following code opens a window where you can search for "*.dat" files. The coded works fine but if for instance I would like to cancel the file opening (clicking at the cross or cancel button), and error will pop up saying "mysmsaf".
Is there a code which I can introduce so that I can cancel or close the open window without error?
[Code] .....
Is there any way to have a macro, that is started from the immediate window, close the immediate window when it's done. My macro closes the immediate window, but as soon as it ends, the immediate window reopens and my cursor is inside it.
View 14 Replies View RelatedI have created a message box but when the Message box window appears
I still wanna be able to access or edit thing in my sheet without closing the message box window.
I know in the UserForm you just have to set the "Show Modal" in the properties window to "False"
But how do I do this with Message Box?
I've got the following code as part of a userform
Private Sub cmbPlant_Exit(ByVal Cancel As MSForms.ReturnBoolean)
If cmbPlant.MatchFound = False Then
cmbPlant.BackColor = &HC0&
If MsgBox("Required!" & vbNewLine & "Please Select Correct Plant Number", vbOKOnly + vbExclamation, "Plant Number") = vbCancel Then Exit Sub
Cancel = True
Else
cmbPlant.BackColor = &H80000005
End If
End Sub
I also have a cancel button
Private Sub cmdCancel_Click()
If MsgBox(" Cancelling Will Clear This Form." & vbNewLine & " No Data Will Be Entered." & vbNewLine & "Are You Sure You Wish To Cancel?", vbYesNo + vbQuestion, "Cancel Data Entry") = vbNo Then Exit Sub
Unload Me
End Sub
If someone clicks the cancel button before using the plant # combo, the form closes, but the cmbplant_exit msgbox pops up too.
I have an error that just began occuring as I am developing a VBA application in Excel.
Whenever I close the workbook, an Error 91 occurs. The VBA editor opens and a line is highlighted within my combo box change event. It is stating that the combo box item no longer exists.
The combo box actually resides as an embedded control with a sheet.
This is a simple macro to hide the sheets if macro is disabled. But I get an error when I close the worksheet. Can anyone please help me with this. Other than that, everything seems fine. The problem is only when closing the worksheet if get an error as " run-time error '1004': Method ;visible' of object' _worksheet' failed". The code is given below.
Public bIsClosing As Boolean
Dim wsSheet As Worksheet
Sub HideAll()
Application. ScreenUpdating = False
For Each wsSheet In ThisWorkbook.Worksheets
If wsSheet.CodeName = "TABLE" Then
wsSheet.Visible = xlSheetVisible
Else
wsSheet.Visible = xlSheetVeryHidden
End If
Next wsSheet
Application.ScreenUpdating = True
End Sub
Sub ShowAll()
bIsClosing = False
For Each wsSheet In ThisWorkbook.Worksheets
If wsSheet.CodeName <> "TABLE" Then
wsSheet.Visible = xlSheetVisible
End If
Next wsSheet
End Sub
I do not understand why my code returns a Run Time Error"9" Subscript out of range. With the following code, I opened a workbook and then wish to close that same workbook without saving. Eventually I will be pulling information from the workbook but for now I just want it to open and then close right away.
Private Sub cb_NewDate_Change()
ListIndex = cb_NewDate.ListIndex
If ListIndex = 0 Then
Application. ScreenUpdating = False
Workbooks.Open Filename:="I:JoeNetwork Conversion FactorsNetworkConversionFactors_Ver_2_0_0.xls"
Application.Workbooks("I:JoeNetwork Conversion FactorsNetworkConversionFactors_Ver_2_0_0.xls").Close False
End Sub
My indirect formula doesn't work when I have the entire path defined. I have the entire filepath specified (which will never change), and then I have cell A6 with the tab name of the worksheet on the workbook
.
Workbook 1 named 'Testme' contains the table with range a2:b5
Worbook 2 contains the formula
I put this formula into workbook2 (the tab in the example is named hitab & I put that name in cell B6)
Here is what I have:Does not work even when other workbook is open
=VLOOKUP(B6,INDIRECT("'H:CUSTOMERSCurrentClientAMRO and General SuppliesBearings, Motors, PTsSavings Tracking[Testme.xls]"&A6&"'!a2:b5"),2,FALSE)
This DOES work when workbook is open, but not when it is closed (which would seem logical if when the workbook is closed, the formula needs the exact path)
=VLOOKUP(B5,INDIRECT("[Testme.xls]"&A6&"!$a$2:$b$5"),2,FALSE)
I can hard code everything except the tab name. Why doesn't Indirect recognize an entire file path and also why does it give a REF error?
- I did a search and found that some people said to use the add-in Indirect.exe. I followed the link and the page was no longer found.
I have a userform which opens when the workbook opens. Ideally Id like to have the userform open without the workbook coming up and have the workbook close when you close the userform. If thats not doable then is there a way to just close the workbook when the userform is closed?
View 3 Replies View RelatedI manage to do a proper search and the return value is correct, but the problem is when I don't get the correct value excel gives me an error, what I can add to make the result just to give me MsgBox "Not found"?
Code below:
Set Ran = Worksheets(2).Range("A:A").Find(CompName, lookat:=xlPart)
If Not Ran Is Nothing Then
MatchRow = Ran.Row
MatchCol = Ran.Column
End If
In the attached sheet I am trying to use the formula below but am getting a #NA error. I have narrowed the problem down to the use of the SEARCH and LEFT functions that I am using to determine the lookup value of the VLOOKUP formula.
what I am doing wrong? If I substitute the SEARCH and LEFT function with the number "14" it works just fine. You can find examples of both in cells B29 and C29 on the rename tab.
I am trying to search for a phrase in a particular column but the excel search function is returning !Value as an error...
Both fields are text so nit sure what is wrong here.
I have a list of cities that i want to cross reference across a cloumn of notes on another sheet. So, I really want to search for the city (Sheet1 Cell A1) in Notes Sheet2 Cell A1) and I want to return it in Sheet1 Cell B1 Whether it exisits in the notes. I then want to copy this down my list of cities in Sheet1 Column a.
I have the following code to search for serial numbers.
Private Sub CommandButton1_Click()
Dim Message, Title, Default, SearchString
Message = "Enter Serial Number" ' Set prompt.
Title = "Find Serial Number" ' Set title.
Default = "" ' Set default.
' Display message, title, and default value.
SearchString = InputBox(Message, Title, Default)
'SearchString = "Rob"
Set S = Sheets.Application
For Each S In Application.Sheets
With S.Range("A1:IV65536")
Set f = .Find(SearchString, MatchCase:=True, LookAt:=xlWhole, LookIn:=xlValues)
If Not f Is Nothing Then
f.Offset(, 3) = Date
Exit For
End If
End With
Next S
End Sub
I would like to amend this so that (a) if the serial number is not found I get a message box saying "Serial number not found" and (b) if the serial number is found, I would like it to highlight the relevant row (after inserting the date).
I have a large spreadsheet, within which i am trying to remove commas from all cells. I get the error 'formula is too long' when I carry out the search. Some of the cells are >1024 characters in length and contain dates, text etc.
View 5 Replies View RelatedHow can I disable the cancel button when the user is prompted to do a "save as"? I need to force the user to name the file and save it to the appropriate file - if they are allowed to cancel I run into problems with my macro.
View 12 Replies View RelatedI've created a routine that starts with a message box saying the following:
"Please Confirm 'DTmacTest.xls' is the ONLY open Excel workbook"
So I have an "OK" button and a "Cancel" button.
but no matter which one I press, it runs the routine.
How do I assign the cancel button to stop the routine when it's pressed?
In my userform I got different comboboxes and one checkbox.
I added a vbOkCancel to my checkbox but for some reason when I click on ok it does not close the userform and therefor not write it into my worksheet.
Can you please tell me what I have to change so it would work again.
The code is below.
Private Sub cmdOk_Click()
Dim RowCount As Long
Dim ctl As Control
Dim Stunden As Double
I highlighted the chxbox event so you can see it better.
In the below mentioned code, there is some problems which need to be modified.
Sub printall()
Dim wsAtt As Worksheet
Dim wsPay As Worksheet
Dim rng As Range
Dim cl As Range
Application.Dialogs(xlDialogPrinterSetup).Show
On Error Goto PrintAll_Error
Application. ScreenUpdating = False
Set wsAtt = ThisWorkbook.Worksheets("Register")
wsAtt.Select
Set rng = wsAtt.Range(Cells(8, 1), Cells(Rows.Count, 1).End(xlUp))
Set wsPay = ThisWorkbook.Worksheets("Payslips")
when the code is run, a window for selecting printer pops up and if the user clicks OK button, it starts printing but the problem is that if the user clicks "Cancel", also it starts printing.
I want that if the user cliks "Cancel" it shuold not start printing & the Select Printer screen should vanish and return to the sheet from where tehe user has run the code.
The code was provided to me in response to my post earlier at this forum However the code line related to select printer is put by me.
By clicking the print-button the user may select the area to be printed.
But if I click the Cancel button, or the upper right X, the print message is sent to the printer, even it shouldn't.
How do I write the code for cancelling the print when clicking the cancel button?
Please see the VBA editor in the attached file.
A last question: is it necessary to declare the variable?
How can this be edited so when the savebox comes up when i hit save it saves the file but when i hit cancel it goes to error:
View 14 Replies View RelatedI have an input box which has OK and cancel buttons If the user clicks cancel I would like to routine to end, which I can do with exit sub. However this particular sub routine has been called from another so the rest of the code continues. Is there a way of exiting all the routines on cancel -- or a neater way than exit sub ?
View 4 Replies View RelatedIf I press either the "OK" or "Cancel" button without entering any states in (because I changed my mind and want ALL states in there, or I pressed either button by accident), the macro eliminates ALL the rows because it needs criteria.
Can this code be modified so that the message box does the following...
1. If I press the "OK" button but I haven't entered in any criteria in the message box, bring up another message box saying "you have not entered in any states in" which brings up an "OK" box and brings you back to the original message box.
2. If I hit the "Cancel" button, bring up a message box that says "No states will be removed" with an "OK" button, essentially cancelling the "State" macro portion of the sub, but continuing with the rest of the code in the sub if there is any.
I would like to have this message box work this way even if states were entered in the input box but the user pressed the "Cancel" button anyway.
3. Create a NEW button named "Keep ALL States" which essentially does the same thing as the "Cancel" button. (I'm trying to "idiot proof" this).
i have a code that i am using but however when I click on the cancel it is giving me a false in the cell when all I am want is to cancel and leave the information in the cell. Here is an example of the code i am using.
View 4 Replies View RelatedI have a code that prepares my spreadsheet and then prints out around 6 different sheets when all is said and done. The prints are not together in the code. I was wondering if there is something that I can add at the beginning of the code to ask the user IF they want a Printout. If they answer Yes then they get printouts of the 6 or so sheets and if they answer No then the code will run but no printouts occur???
I have play3ed around a bit and implemented the following in one of my codes but this one only has 1 sheet that prints out.
'Checks to see if this is a corrected Deposit in which case Depositor probably has a Verification sheet already printed
If Sheets("Input Sheet").CheckBox5 = True Then
Answer = MsgBox("It's seems that this Verification sheet was already printed once. Do the Corrections you have made require you to print another one?" & vbCr & vbCr & "If you reuire the Verification sheet to print again the please click YES otherwise click No.", vbYesNo, "PRINT Out Required???")
If Answer = vbYes Then
Rows("16:275").Select
ActiveSheet.Unprotect "unlock"
Selection.AutoFilter
ActiveWindow.ScrollColumn = 1.........
Msg = "Enter a number"
BOXTITLE = "Number"
ANS = InputBox(Msg, BOXTITLE)
This generates 2 buttons. If i click the cancel button how would i direct the code to go to a certain line in my code. EG if cancel button clicked then goto 10
After an InputBox statement, how do I test to see if user pressed "Cancel" and if so, exit the Sub?
View 9 Replies View RelatedHere is my
Private Sub Workbook_Open()
Select Case MsgBox("my question?", vbYesNoCancel)
Case Is = vbYes
'Yes Code will sort Moistures and Owners
Case Is = vbNo
'NO code will sort Moistures and Fields
Case Is = vbCancel
' Will Sort neither and allow for data entry
Case Else
Debug.Print "Whoops"
End Select
End Sub
I want to rename the Yes, no, and cancel buttons to Pay Owner, Field Close Out, and Data entry.
I would like some help on disabling the Esc key in a macro and to disable the Cancel button and X on message and input boxes.
My macro is to insert rows in a protected worksheet and another to run a spellcheck, if my users hit any of the above keys during the macro my worksheet is left unprotected and formulas could be deleted in error. I have pasted a copy of my code below,
Sub InsertRowAboveCopyFormulas()
ActiveSheet.Unprotect ("password")
Dim Rng, n As Long, k As Long
Application.ScreenUpdating = False
Rng = InputBox("Enter number of rows required.")
If Rng = "" Then Exit Sub
On Error Resume Next
ActiveCell.EntireRow.Select
Selection.Resize(rowsize:=Rng).Rows(1).EntireRow. _
Resize(rowsize:=Rng).Insert Shift:=xlUp
Selection.Offset(Rng).AutoFill Selection.Resize( _
rowsize:=Rng + 1), xlFill
Selection.Resize(Rng).EntireRow. _
SpecialCells(xlConstants).ClearContents
ActiveSheet.Protect ("password")
End Sub
Application.InputBox ("test")
I get a cancel button, I want this to show a message and then exit the program.
My entire porgram is in one Sub.
I am facing a problem while validating an Inputbox actually the issue is that when user press Cancel button on Input box it returns a empty string and also when user does not enters anything in Input box and pressess ok than too a Empty string is returned . Than how we will apply the following conditions :
1) If user does not enter anyting in InputBox and pressess OK than a msgBox should appear saying that "Uhav entered empty string and than looping back to inputbox"
2) If user pressess Cancel procedure should End
Sub try()
Dim Path
Path = InputBox("Specify Path" , "Report Path")
If Path = "" Then
' Issue comes here becuse anyways code reahes here if user either lefts the Inputbox empty and presses ok OR user pressess cancel as i need to show different actions for 'different conditions
End If
End Sub
