Msg = "Enter a number"
BOXTITLE = "Number"
ANS = InputBox(Msg, BOXTITLE)
This generates 2 buttons. If i click the cancel button how would i direct the code to go to a certain line in my code. EG if cancel button clicked then goto 10
By clicking the print-button the user may select the area to be printed.
But if I click the Cancel button, or the upper right X, the print message is sent to the printer, even it shouldn't.
How do I write the code for cancelling the print when clicking the cancel button?
Please see the VBA editor in the attached file.
A last question: is it necessary to declare the variable?
I would like some help on disabling the Esc key in a macro and to disable the Cancel button and X on message and input boxes.
My macro is to insert rows in a protected worksheet and another to run a spellcheck, if my users hit any of the above keys during the macro my worksheet is left unprotected and formulas could be deleted in error. I have pasted a copy of my code below,
Sub InsertRowAboveCopyFormulas()
ActiveSheet.Unprotect ("password")
Dim Rng, n As Long, k As Long
Application.ScreenUpdating = False
Rng = InputBox("Enter number of rows required.")
If Rng = "" Then Exit Sub
On Error Resume Next
ActiveCell.EntireRow.Select
Selection.Resize(rowsize:=Rng).Rows(1).EntireRow. _
Resize(rowsize:=Rng).Insert Shift:=xlUp
Selection.Offset(Rng).AutoFill Selection.Resize( _
rowsize:=Rng + 1), xlFill
Selection.Resize(Rng).EntireRow. _
SpecialCells(xlConstants).ClearContents
ActiveSheet.Protect ("password")
End Sub
I have a userform with two buttons : O.K. and Cancel
When I use the O.K. Button, all is correct, but when I use the Cancel Button, it doesn't work.
What line I have to add, to leave that userform ? (Cancel : CommandButton2_Click()
Sub CommandButton1_Click()
Me.Hide
End Sub
Public Function userChosen()
Me.Show
userChosen = Format(DateSerial(cmbJaar, cmbMaand, cmbDag), "dd.mm.yyyy")
Unload Me
End Function
I have the code below. That code call some InputBoxes in sequence, that be filled with correctly information like name, cell phone, date of purchase, etc. (sheet is in Portuguese)
But I want to give a function for 'Cancel' Button, because actually if we click on cancel Button, the macro skip to the next inputbox.
I want to click in Cancel Button, and Exit Sub, I used this Tip for example
[Code] ....
But if we do not fill the Text field, the Macro Exit Sub Too
Some fields are optional, so for this i search for a solution
Click in Cancel Button and Exit Sub
[Code] ....
I have this macro code that can protect and unprotect, It will show the input box and ask for a password. my problem is when I choose cancel, it still protect the file, the same thing with my unprotect code. here is my code below
Protect Code :
[Code]...
Unprotect Code :
[Code]...
i have a userform with label, textbox, ok and cancel buttons.this userform is to prompt users for password.
i use select case for capturing the password entered.
case 1 is correct password
case 2 is blank password which is vbnullstring
case 3 is wrong password where i use case else
when i click on cancel button, it will be detected as case else. cancel=true for my cancel button wont work.
i think the logic is to put an IF statement before SELECT to capture if the cancel button is clicked.
Why is the below code not valid? I am using a userform with a cancel button and i cant it to copy and paste some lines on sheet Chart_Data as it unloads. But i just get the error
"Runtime Error '1004': Method 'Select' of object '_Worksheet' Failed"
Private Sub Cancel_Click()
Chart_Data.Select
Chart_Data.Rows("6:7").Copy
Chart_Data. Range("A4").PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, _
SkipBlanks:=False, Transpose:=False
Unload Me 'Cancels Operation
Exit Sub
End Sub
I would choose to select the delete button. I've created a new worksheet within a workbook, insert text and formatting, and copied to a specific place in the active worksheet. Everything works well except 1. there is a LOT of coding because I recorded the macro and 2. the delete message pops up for every files the macro manipulates. I have to click "delete" about 60 times throughout this macro and would love to be able to let it click its own delete button!
View 6 Replies View RelatedI worte a procedure to protect the worksheet. When we clik on command button it asks the password but if I click on cancel button procedure is exiting.
View 8 Replies View RelatedPrivate Sub Workbook_Open()
MsgBox "Insert Text Here" , vbOKCancel
End Sub
What I would like to do is have a MsgBox open up that states this file is confidential and you click 'I Agree' button, or a cancel "I Decline"
I do not want the spreadsheet to be visible until they click on 'I Agree' button, and then if they click cancel, the Excel closes.
This is not a huge security issue, just a reminder for the Top Brass not to email out the file. This is for looks and show only
I want my worksheet to require validation of entry data before printing, so I decided to use the "Workbook_BeforePrint" event, and display a simple dialog box with an "ok" or a "cancel" button as input options.
The problem is that, as coded, "cancel" button does not cancel the print.
I have a macro that works perfectly to import a text file and parse it. Now i need it to do multiple ones. I import the txt file to a new workbook as i filter for certain data only and if found i copy that to the current workbook. I want to do the same just for many txt files:
[Code] .......
If the user selects French (radio button selection), I want to swap out the existing English text for French and vice versa. One large text box with several paragraphs. Can Excel do this?
View 2 Replies View RelatedI have a userform and want to disable the command button unless a text box contains text. what I need to do?
View 2 Replies View RelatedHow can I disable the cancel button when the user is prompted to do a "save as"? I need to force the user to name the file and save it to the appropriate file - if they are allowed to cancel I run into problems with my macro.
View 12 Replies View RelatedI've created a routine that starts with a message box saying the following:
"Please Confirm 'DTmacTest.xls' is the ONLY open Excel workbook"
So I have an "OK" button and a "Cancel" button.
but no matter which one I press, it runs the routine.
How do I assign the cancel button to stop the routine when it's pressed?
In my userform I got different comboboxes and one checkbox.
I added a vbOkCancel to my checkbox but for some reason when I click on ok it does not close the userform and therefor not write it into my worksheet.
Can you please tell me what I have to change so it would work again.
The code is below.
Private Sub cmdOk_Click()
Dim RowCount As Long
Dim ctl As Control
Dim Stunden As Double
I highlighted the chxbox event so you can see it better.
In the below mentioned code, there is some problems which need to be modified.
Sub printall()
Dim wsAtt As Worksheet
Dim wsPay As Worksheet
Dim rng As Range
Dim cl As Range
Application.Dialogs(xlDialogPrinterSetup).Show
On Error Goto PrintAll_Error
Application. ScreenUpdating = False
Set wsAtt = ThisWorkbook.Worksheets("Register")
wsAtt.Select
Set rng = wsAtt.Range(Cells(8, 1), Cells(Rows.Count, 1).End(xlUp))
Set wsPay = ThisWorkbook.Worksheets("Payslips")
when the code is run, a window for selecting printer pops up and if the user clicks OK button, it starts printing but the problem is that if the user clicks "Cancel", also it starts printing.
I want that if the user cliks "Cancel" it shuold not start printing & the Select Printer screen should vanish and return to the sheet from where tehe user has run the code.
The code was provided to me in response to my post earlier at this forum However the code line related to select printer is put by me.
I have written a piece of code that changes the text in a button (the code is added to the click event of the button):
View 5 Replies View RelatedI have about 20 buttons on an excel worksheet. Is there a line of code that will tell me the text which was one was selected? The reason I am asking is because what is being passed into a module depends on what is selected. I know I can do a Case statement or if statements saying if this selected then this, if this selected then this, etc but was hoping for a one liner. This way it will be easy to maitain if other buttons are added as well.
Was thinking it is something like this but not sure how to say which button is selected.
strButtonName = Selection.Text
How can this be edited so when the savebox comes up when i hit save it saves the file but when i hit cancel it goes to error:
View 14 Replies View RelatedI have an input box which has OK and cancel buttons If the user clicks cancel I would like to routine to end, which I can do with exit sub. However this particular sub routine has been called from another so the rest of the code continues. Is there a way of exiting all the routines on cancel -- or a neater way than exit sub ?
View 4 Replies View RelatedIf I press either the "OK" or "Cancel" button without entering any states in (because I changed my mind and want ALL states in there, or I pressed either button by accident), the macro eliminates ALL the rows because it needs criteria.
Can this code be modified so that the message box does the following...
1. If I press the "OK" button but I haven't entered in any criteria in the message box, bring up another message box saying "you have not entered in any states in" which brings up an "OK" box and brings you back to the original message box.
2. If I hit the "Cancel" button, bring up a message box that says "No states will be removed" with an "OK" button, essentially cancelling the "State" macro portion of the sub, but continuing with the rest of the code in the sub if there is any.
I would like to have this message box work this way even if states were entered in the input box but the user pressed the "Cancel" button anyway.
3. Create a NEW button named "Keep ALL States" which essentially does the same thing as the "Cancel" button. (I'm trying to "idiot proof" this).
i have a code that i am using but however when I click on the cancel it is giving me a false in the cell when all I am want is to cancel and leave the information in the cell. Here is an example of the code i am using.
View 4 Replies View RelatedI have a code that prepares my spreadsheet and then prints out around 6 different sheets when all is said and done. The prints are not together in the code. I was wondering if there is something that I can add at the beginning of the code to ask the user IF they want a Printout. If they answer Yes then they get printouts of the 6 or so sheets and if they answer No then the code will run but no printouts occur???
I have play3ed around a bit and implemented the following in one of my codes but this one only has 1 sheet that prints out.
'Checks to see if this is a corrected Deposit in which case Depositor probably has a Verification sheet already printed
If Sheets("Input Sheet").CheckBox5 = True Then
Answer = MsgBox("It's seems that this Verification sheet was already printed once. Do the Corrections you have made require you to print another one?" & vbCr & vbCr & "If you reuire the Verification sheet to print again the please click YES otherwise click No.", vbYesNo, "PRINT Out Required???")
If Answer = vbYes Then
Rows("16:275").Select
ActiveSheet.Unprotect "unlock"
Selection.AutoFilter
ActiveWindow.ScrollColumn = 1.........
After an InputBox statement, how do I test to see if user pressed "Cancel" and if so, exit the Sub?
View 9 Replies View RelatedHere is my
Private Sub Workbook_Open()
Select Case MsgBox("my question?", vbYesNoCancel)
Case Is = vbYes
'Yes Code will sort Moistures and Owners
Case Is = vbNo
'NO code will sort Moistures and Fields
Case Is = vbCancel
' Will Sort neither and allow for data entry
Case Else
Debug.Print "Whoops"
End Select
End Sub
I want to rename the Yes, no, and cancel buttons to Pay Owner, Field Close Out, and Data entry.
Application.InputBox ("test")
I get a cancel button, I want this to show a message and then exit the program.
My entire porgram is in one Sub.
I am facing a problem while validating an Inputbox actually the issue is that when user press Cancel button on Input box it returns a empty string and also when user does not enters anything in Input box and pressess ok than too a Empty string is returned . Than how we will apply the following conditions :
1) If user does not enter anyting in InputBox and pressess OK than a msgBox should appear saying that "Uhav entered empty string and than looping back to inputbox"
2) If user pressess Cancel procedure should End
Sub try()
Dim Path
Path = InputBox("Specify Path" , "Report Path")
If Path = "" Then
' Issue comes here becuse anyways code reahes here if user either lefts the Inputbox empty and presses ok OR user pressess cancel as i need to show different actions for 'different conditions
End If
End Sub