I have a large spreadsheet in which I have reached the limit for conditional formatting. (i.e. 2050 rows)
To resolve this I can add a single expression for conditional formatting across all cells. This means I need to create a more complex expression.
I effectively have two types of conditional formatting that are very similar. I have the standard Yes, No & A/L which I wand to shade accordingly. I then have alternating columns of Yes , No , A/L . I have introduced spaces to stop these values from being counted by another formula but still display yes and no. I want the shading to be the same in both cases.
I have built the following expression which does not seem to work.
Ok, this should be an easy one. I have a formula that one of the functions needs to check if certain cells are blank.
For example; I want to check if A2, B2 and C2 are blank.
Currently, the only thing that seems to work is,=IF(OR(ISBLANNK(A2),ISBLANK(B2),ISBLANK(C2)),"PASS","FAIL")
This is just a piece part of the entire formula and I have to evaluate the data based on multiple criteria. The ISBLANK() portion has to be able to evaluate at least 15 cells. Is there a way to evaluate the cells all at once instead of typing out ISBLANK() over and over. I have tried everything I can think of in regards to syntax.
I have a ss that has item descriptions, quantities and pricing.
Item descriptions are identified by a letter (a, b, c, etc) and in cells C20:c32. These are selected by drop down box. Item quantities are in cells E20:E32.
I want to evaluate cells C20:C32 and determine what letter is chosen. If A is selected in any cell C20:c32 I want to count the quantities for A in cells E20:E32. I can't quite figure out how to do this.
I am trying to do this preferably not in a macro if possible. Basically I have a monthly metrics spreadsheet that pulls it's values from a data entry sheet. I setup the display sheet so that if there's no data for the month the cell is blank in order to avoid errors. So, now what I want is one cell that will update and tell me if the last month's metric was good or bad. So, I am trying to create a cell formula that will be able to find the last row with data. In this case it would be the row corresponding to September's data, then evaluate the value in that cell to see if it's above or below 90% = 0.90 in this case.
I want to count the number of cells in a row containing a value greater than a fixed number but less than a number entered in another cell.
For example, in the cells A1..K1 I want to know the number of cells which have an entry greater than 7 but less than the value I have entered in cell M3. I have used the COUNTIF in other circumstances but I cannot find out how to use it with this "greater than and less than" condition?
I'm trying to make an expression to calculate some fields in Excel 2007. Trying to check fields up to a given number and give them a high multiplier, and add the rest of the numbers with a lower multiplier.
I have multiple fields with numbers in hundreds. I want to multiply the sum of this fields (up to 500) with 4. But the expression must also start the count from the first field, and when im hitting 500 as a sum I want the rest to be added with 2 as multiplier (the reason for the prioritizing of the fields is that they also have their own values/multipliers, but I'll skip that to avoid to much confusion here).
It's probably a lousy description. I'll give an example:
Field 1__Field 2__Field 3____Sum 100____300_____500______2800
How in earths name did I get that Sum you might ask. ((100 + 300 + 100) * 4) + (400 * 2) = 2800
400 is the number left from the third field wich I only want to multiply with 2 instead of 4.
Another example:
Field 1__Field 2__Field 3____Sum 300____600_____500______2000
((300 + 200 + 0) * 4) + (900 * 2) = 3800
900 is taken from the rest value of field 2 and 3.
If there any way of doing this "sum check and multiply, and then add the rest with a different multiplier"?
With Excel you can do If(array, array2, false) to poplulate another array. Is there a way to replication this without looping. For instance can the IIf hold an array as its expression or is there any other way of replicating this If statement without looping?
a) The first letter cannot be number b) the password should have a combo of numbers letters and one special character c) The password should begin with a big case letter
Here's what I need to do. I have a list of row numbers in AA2:AA6, so for i =1 to 5 I want to insert a page break before cell (column AA and Row(#in cell AA2-5))
I'm trying to figure out the whole Regular Expression thing...so I figured Hotpepper's EXDATA UDF would be a good place to try and rewrite with Regular Expression...I got it to work...but not sure why as it seems opposite of what I would have expected...
eg pattern [^/d] i thought would give me everything except numerics...but it appears to be giving me numerics....
here's the code and sheet...can someone help explain what's going on? .......
I am currently using a SUMIF statement as follows: =SUMIF(W1:W1500, "Charnwood" & "*", S1:S1500). The problem i am having is the fact that SUMIF doesn't work with a reference to a closed worksheet. I tried using SUMPRODUCT but it did not work. The reason it didn't work is because I need to find in column W anything with Charnwood and anything else past it, auch as Charnwood Estates. This is what I tried: =SUMPRODUCT((W1:W1500="Charnwood")*(W1:W1500="*")*(E1:E1500="S"),S1:S1500) which of course is a syntax error.
I have been reading the different post here on the forum. I have found a snippet of code that will open a pop-up message from a value of a cell. I would llike to do this on one of my reports. Here is the scenario.
Range (R5:S5) 0.15 them MsgBox "Note Must Be Entered For +/- 15% change" But There are 14 different cells that I want this to work for. The value differs from day to day, and this should pop-up happen without a user having any actions other then the calculated value. But ones the note is entered in the "Notes: cell the message will not return. Hope I explained it correctly.
The value of the cells in question are calculated in each cell with a formula example "=IF(ISERROR(Z20/H5),0,IF(ISERROR(Z20/H23),0,(Z20/H23)))"
I have a formula that has been working and it looks like this
=VLOOKUP(A13;'IFS export'!$A$1:$F$19000;4;FALSE)
Now I want to use the same formula in an other workbook and it gives an error
=VLOOKUP(A2;DRAWING!$A$2:$C$9168;3;FALSE)
When I type this formula I get the window that says "This formula contains an error. *For information about fixing common formula problems, press help. *........... *..........."
And if I go and try to change the first formula that has been work it gives me the same error.
I have a doubt, I have two excel's cells that contain numerical values that I assign to variables but it is out of service appear these data at a third cell example cell ( 1.1 ) value 2 var1 and cell (1.2) value 3 var2, the subject is that I want that at a third cell 2-3 appear from the following way But not himself like to do it because if I lay eggs between quotation marks the - you give me error Example:
Cells ( 1.3 ) .value var1 - var2 ( anything that way not?) And increasing the serious complexity that if the second number is by a digit add it four zeros equal than to the first digit something that way 00002-00002 and if he is over a digit than remove insignificant persons 00010-00012, another example 00002-00132, if they ask me you are for an importable format to a data base and this is a code of identification but the user deposits the data in excel and this column does not deposit porq this conceals this piece of information it is drunk of the first cells with the number.
I'm trying to use a range(Cells1),(Cells2) all working fine, but now I'm trying to use variables for the Row selection. selection.row as one of the variables, but keep on getting a error.
Code: Sub Clear_Time() Dim Rng As Range Dim pointer As Integer pointer = Worksheets("Summary").Range("Z1").Value Worksheets("SubPanel").Range((Cells(10, pointer)), (Cells(52, pointer))).Find(What:="").Activate
I am having an error when I try to run it and it appears not to like my destination (line bolded) - WHAT AM I DOING WRONG.?? Numrows = Worksheets("File1"). Range("A65536").End(xlUp).Row 'get the Row count
' LOOKUP Looklist! (Col B) '---------------------------- For d = 1 To 228 ' looks in Looklist B2(2,2), check against G1(1,7) If Worksheets("Looklist").Cells(d + 1, 2).Value = Worksheets("File1").Cells(1, d + 6).Value Then ' If matches then copies G-x(lastrow,7) to looklist L2(2,12) Worksheets("File1").Cell(Numrows, d + 6).Copy _ Destination:=Worksheets("Looklist").Cells(d + 1, 12) End If Next d
(Excel 2007) The issue I'm having is that a loop statement of mine is failing to recognize that a couple values are equal. It works for the first 3 iterations of the loop, then stops recognizing. I tried copying another set of numbers in the failing one's place, and that actually worked. I can't attach anything, so I'm including a link to a detailed screen shot with some notes on it and code that I'll host on my site. Not sure how else to explain the issue, but if you take a look at the screen shot you can see the excel sheet being worked on and the vba code running. I will also include a text file of the code
Here are the links to the screen shot and text file of my code Text file Screen Shot
I am using the following to check if a string has a sequence of 6 decimal digits in it. But am getting an error. If(str Like *######*). I have to check if str has values like 123456USA ; ABC725439 ; jh658478hd. I thought # represents a single digit and * represents any no of characters
I am trying to make the "A4:A" portion of this line of code generic so it can work in multiple different files. I have defined a variable FirstGridRow that will take care of the '4' but I need to find a way to splice it all together. Essentially I am stuck trying to tack on the ":A". The first piece shows where I am coming from and the second is where I am trying to go to.
