# Nested Next Loop: Evaluate The If Statement Below Over A Range Of Cells

Aug 22, 2008

I think the problem is the order in which I have the "next" loops. I would like to evaluate the if statement below over a range of cells

Sub Analysis()

Dim i As Integer
Dim x As Integer
Dim y As Integer
Dim k As Integer
Dim TheLast As Integer

TheLast = Sheets("Name").Range("c" & Rows.Count).End(xlUp).Row

For i = -7 To -26 Step -1
For x = 24 To 43
For y = 14 To 43
For k = 16 To TheLast.................

## Nested IFs Statement That Looks At A Range Of Cells Between 2 Tabs Within The Same Worksheet

Jun 8, 2006

I'm trying to create a nested IFs statement that looks at a range of cells between 2 tabs within the same worksheet, determines if there is a value of 1 in ANY of those cells, and if there is, to multiply the value of yet another cell by 1 in a cell on the second tab. So, if 1 is a value in any cell of Tab 1 cells C82 to C86, then in Tab 2 cell B21, multiply 1 by the value in 'Tab 1 Cell H5'.

I've tried this =IF(('LM fundamentals'!C82>=1), ('LM fundamentals'!C83>=1), ('LM fundamentals'!C84>=1), ('LM fundamentals'!C85>=1), ('LM fundamentals'!C86>=1), 'Order Information'!\$B\$21!=(1* 'LMfundamentals'!\$H\$5!))

I even tried a vlookup, having given the cell range in Tab 1 a name, etc. But I have little skill with logic statements, apparently.

## Evaluate() For Loop Less Range Calculations

Feb 27, 2010

I'm trying to get my head around using this syntax for EVALUATE() to allow an entire range of values to be changed all at once instead of via loop.

This macro works:

Sub TruncateValuesInSelection()
'JBeaucaire 2/23/2010
'Select a range and then run the macro to truncate values without looping
Dim Cell As Range

With Selection.Cells
.Value = Evaluate("IF(ROW(1:" & Selection.Cells.Count & "),TRUNC(" & .Address & ",2))")
End With.........

## IF Statement To Evaluate Multiple Cells

Jun 9, 2014

I have a ss that has item descriptions, quantities and pricing.

Item descriptions are identified by a letter (a, b, c, etc) and in cells C20:c32. These are selected by drop down box. Item quantities are in cells E20:E32.

I want to evaluate cells C20:C32 and determine what letter is chosen. If A is selected in any cell C20:c32 I want to count the quantities for A in cells E20:E32. I can't quite figure out how to do this.

## Nested If Statement Within Range

Apr 7, 2009

I dont know how to nest and if (if that is the right way to go about it). this is what I have ....

## Subscript Out Of Range Error When Using Nested If Statement

Aug 27, 2008

I have a Userform which has 2 textboxes. User enter his employee id on textbox1 then enters a valid break time code which are 1,2 and 3 on textbox2. If User typed 1 then first breaktime start time will be pasted on the worksheet. When User returns after break he then enters his employee id again and then type 1 to end his first breaktime, the end time will be pasted on the worksheet. My program works fine however, I am trying to place a code which will prompt the user to end his first break time before entering another valid break code. Kindly check my code below as I am receiving an error message. 'Run-time error 9' Subscript out of range. This thing is driving me nuts. Any advise or can you tweak my coding vba experts.

## Nested If Statement Using Time Formatted Cells

Nov 13, 2009

I am trying to build an if statement to test variables that are in time format and then perform a calculation.

I was able to get an example working if I convert the start times to integers rather than time values. However, the data won't be provided to me as integers.

So, I need a nested if statement (using "and") that will test for two situations using cells in time format or I need to write a macro to convert the time data to integer format. I've been working on the former most of the day and have hit a brick wall.

## Nested IF Price Bands: Evaluate Pennies Into <.2, >.2<.4, >.4<.6, And >.6<.99

Feb 23, 2007

=IF(MOD(F48,1)<0.5,INT(F48)+0.49,INT(F48)+0.99) Used this formula to convert pennies to either .49 OR .99 Now they want .19, .39, .69, .89 output I need a method to evaluate pennies into <.2, >.2<.4, >.4<.6, and >.6<.99 and output the int+pennies I don't know if this can be done with formulas OR will req VBA,
which I haven't used (yet). This is needed to simplify signage tags
on the items.

## Nested If Statement - Calculate Value Based On All Of Active Cells In Column

Sep 11, 2013

I am putting together a procedure to calculate a value based on all of the active cells in column "A" and a couple other conditions. "k" is my variable to put a value into (k,8) until all the active cells in column A have a corresponding value in (k,8)

I have my scenarios all built out into If statements and the code runs....but no value is being added to cell (k,8) for any of the rows with entries in column "A" when the procedure is finished running. Depending on the values in (k,2) and (k,3) there are four different ways the value in (k,8) needs to calculate as I have built out below. Why my values aren't being added to (k,8)?

Code:
Sub CalcSpecialFee()
Dim k As Integer
Dim cell As Range
k = 4
Application.ScreenUpdating = False
Sheets("Summary").Select

[Code] .........

## Using MID On Range In For Each Loop With IF Statement?

Aug 8, 2013

I am trying to loop through a range, checking for a cell to contain one of two characters and then put a value in a cell to the side (well 3 away) of it. Im getting an error for Type mismatch on line:

VB:
If CellContent = "h" Or "v" Then

the data in the cell is an along the lines of '12.34.56.43 som-thi-vh-ng1'

VB:
Dim MyRange, MyCell As Range
Dim CellContent As String
Sheets("Sheet1").Activate

[Code]....

## Evaluate A Count Statement With A Variable?

Jul 14, 2013

I am trying to perform a count statement in VBA as below, with the 1st Evaluate I get the correct response, however with the second option it shows a 0. The variable is obtaining the correct values as per the example of 6017Complete, this is proven with the MsgBox

VB:
Dim TillNo As String
TillNo = Target.Offset(, -1) & Target.Offset(, 0) & "Complete"
MsgBox "Till Number is" & TillNo
Target.Offset(, 10) = Evaluate("COUNTIF(C3:C123,""6017Complete"")")
Target.Offset(, 11) = Evaluate("COUNTIF(C3:C123,TillNo)")

## Force If Statement To Evaluate Another Formula Value

Aug 26, 2009

I am trying to use an If statement and wanting to evaluate another formula.

The formula is as follows: =IF(B6>=7,Table!M16,Table!M47) where B6 =REPLACE(D24,1,3,"") which returns an integer. In this case it is 6.

Unfortunately it doesn't process the formula value correctly in the If statement unless the reference cell is hard coded with the integer. Is there a way to force the formula to evaluate the value of the cell formaula first before doing the If comparison?

## Nested Loop. Inner Loop Not Running

Nov 30, 2006

i have a problem with a nested loop:

it seems like the first instance of the code is running the way i want it to run, but when it starts with the second instance, it does the first search and copy, but it seems like the nested loop is being ignored.

am i doing something wrong?

dan
==========================================================
Thanks to Aaron Blood for the find_range function. i also poached the lastrow function from somewhere on ozgrid, but I cant remember the name of the poster.
==========================================================

Sub new2()

Dim Org_Area As Variant
Dim Item As Variant
Dim Copy_To1 As Variant
Dim Cell_Ref As Variant

r = 1 ..................

## Simple Nested IF Statement

Mar 7, 2014

I am trying to do a nested IF statement in which if Cell A has a number, display it. If Cell A = "", look in Cell B. If Cell B has a number, display it but if its "", then display Cell C.

I have the IF statement working for the first two pieces but don't know how to incorporate a third statement: =IF(A="",B,A)

This works - how do I get it to check Cell B and show Cell C if B is empty?

## How To Figure Out This Nested IF Statement

Mar 7, 2009

I work on a sea going vessel and manage an Emergency Response document. My dilemma is automatically assigning a Muster location based upon data entered in a certain column. I'm having a problem figuring out this Nested IF Statement: Column J will either be blank (no entry), "Fire" or "HRC".

If Column J is blank, column A needs to read "STBD". If column J has either "Fire" or "HRC" column A should read "PORT". See attached Excel file for an example with only 3 or 4 rows.

## Nested IF Statement Limitation?

Feb 20, 2014

I have a nested IF statement that I am using in an application I am building in Excel. I am using logic to get the current month and then evaluate whether the value is a number. I would like to know if there is a better way to perform what I am trying to accomplish using another function. I am trying to cocantonate the the statements together which has worked in the past but not for this particular function.See Below... The function works if i use 7 IF statements.

=IF(I3="Jan",IF(ISNUMBER(SEARCH("NA",Data!\$B\$355)),"NA",Data!\$B\$355),
IF(I3="Feb",IF(ISNUMBER(SEARCH("NA",Data!\$C\$355)),"NA",Data!\$C\$355),
IF(I3="Mar",IF(ISNUMBER(SEARCH("NA",Data!\$D\$355)),"NA",Data!\$D\$355),

[Code] ............

## Vlookup And Nested If Statement

Jun 26, 2007

In the example below I have created a validation list in B1 that references D2:D8. What I am then trying to do for cell B2 is create a vlookup and nested if statement that says if b1 is a number lookup the value in column D and return the value in colunm E and if b1 doesn't = a number, ie 'none' then return a null value. The same goes for B3 where if b1 is a number lookup the value in column D and return the value in columm F and if b1 doesn't = a number, ie 'none' then return a null value.dropdown list problem.

************************************************************************>Microsoft Excel - Book1.xls___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutA1=
ABCDEF1Numbernone*NumberDescriptionRef2Description**none**3Ref**1one44***2two55***3three66***4four77***5five88***6six9Sheet2*
[HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name box
DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.

## Nested If Statement For My Table

Apr 17, 2008

I am trying to write a nested if statement for my excel table. I calculated the betas of the stock portfolio. I would like to create an if statement that would do something like this:

if beta is less than 1 -- Below Average Risk
if beta is greater than 1 but less than 1.25 -- Average Risk
if beta is greater than 1.25 but less than 1.75 --Medium Risk
if beta is greater than 1.75 -- High Risk...

## ISERR With Nested IF Statement

Jul 3, 2009

I have the following formula which consumes forward demand against an initial stock figures, it nests the next 7 buckets and then finally takes an average of the next 13 buckets to give a weeks forward cover value, unfortunately if the next 13 values are 0 it returns DIV value, how do I nest an ISERR function to replace DIV with 0 ? Thanks in anticipation as I am pulling my hair out, whats left! alternatively a formula to consume demand past 7 buckets?
IF(M40

## Nested If Statement Malfunctions

Oct 11, 2006

I have the following nested if statement that works very well which is designed to ensure data is entered in a specified format.

Sub Enter_Batch_Number()
Dim ans As String
Err_Invalid:
ans = Application.InputBox("Please Enter Batch Number," & vbNewLine & "Batch Number Must Be One Letter & 4 Digits. e.g A9999")
Range("D1") = ans
ActiveSheet.Range("D1").Value = (UCase(ActiveSheet.Range("D1").Value))
If Range("D1") = False Then
MsgBox "Batch Number Must be Entered", vbCritical + vbOKOnly, "Invalid entry"
Goto Err_Invalid......................

this then says that the file exists even when i know it does not. I'm sure as usual I'm missing something obvious but cant find it yet

## Formatting Nested If Statement

May 31, 2007

I have spent the last 2 hours trying to figure out why this formula will not work. I am guessing it is probably something simple like a "format" issue. Okay here is my formula, and the data it represents.

Column F is The Primary Tool. This cell will have X if it applies, or be blank if it does not. the formula is based on whether or not there is an X in this field. Column D is the Tab Title. This cell can be empty or contain a title. If the cell is Blank, the result should be blank, if the title is the same title as the cell above it, the result should be the next consecutive number. And if D is neither blank nor the same title as above it, it should display 1. Column N is where a numerical value for each title is displayed.

=IF(\$ F8="X",IF(D8="","",IF(D8=D7,L7,L7+1,(IF(D7="",1),""))))

## Nested For Each Next Loop

Feb 17, 2007

I think its something simple I'm missing here. I have a range of stock prices (Range("E3,E4,E5,E6")) what I'm trying to do is use for each next loop to calculate the number of shares that I could trade. and place those shares in a range of cells adjacent to its corresponding price (Range("G3,G4,G5,G6")). I think the problem is in my loop statements but I can't seem to find it . Could someone kindly show me the error in my ways.

Code: ...

## Nested IF Statement Where Need To Trim Value Being Tested

Aug 28, 2012

Is it possible to do a nested if and trim the field you want the if function to test? I have a field with a CS # in it. If the it is a CS 1 thru 9 I need it to return a value.

The problem is the CS # as 4 more digits after the first number. Such as CS40562.

I tried writing IF((right(trim(A81),4)="CS4","MW",IF((right(trim(A81),4)="CS5","NW",...

## Nested If Statement With 2 Possible Outcomes And 2 Vlookups?

Oct 18, 2013

I have an If statement I am trying to get to work but not sure of the flow. Each part works seperately but not together. What I need is if column E is blank leave blank, if cell DI2 is Yes then use columns DJ to DP for the lookup if DI2 is No than use columns O to U for the lookup. The first 2 lines are the individual formulas that work independently. The 3rd was my last attempt at combining them.

=IF(\$E21="","",VLOOKUP(\$E21,\$O\$5:\$U\$476,2,FALSE))
=IF(\$DI\$2="YES",VLOOKUP(\$E21,\$DJ\$5:\$DP\$366,2,FALSE))

[Code]....

## Nested If Statement Returning FALSE Instead Of Value?

Aug 5, 2014

The formula I am having issues with is:

=IF(L14="YES",IF(B14="","",NETWORKDAYS(B14,IF(AH14="",TODAY(),AH14),IF(L14="NO",NETWORKDAYS(B14,IF(V14="",TODAY(),V14))))))

I'm looking for formula to return a value based on the amount of networkdays between 2 dates.

Column L has a drop down for
"YES" and "NO"

If "YES" is selected then I need the formula to subtract AH from B (if B is blank I don't want the formula to return anything)

if AH has no date then I want it to use todays date.

If "NO" is selected then I need the formula to subtract V from B (again, if B is blank I don't want the formula to return anything)

if V has no date then I want it to use todays date.

The formula seems to work for everything as it is EXCEPT when L is "NO" it only return FALSE.

## Nested IF Statement With INDEX And MATCH

May 22, 2014

I have three worksheets the first one called Econ the second one called CheckLogs and the third is a customer sheet. I am needing to match up a cell from the Econ sheet with a cell from the Checklogs sheet and then it matches a cell from the customer sheet with a cell from the checklogs to determine what customer sheet. My problem is how do I loop through the customer code cell until it finds the correct cell.

=IF(B1=CheckLogs!B2,INDEX(CheckLogs!\$F\$2:\$F\$4493,MATCH(Econ!G2,CheckLogs!\$C\$2:\$C\$4493,0),MATCH(\$B\$1,CheckLogs!\$B2:B4493,0)), "")

so in the formula "B1" is located on the customer sheet and is the customer code field, "CheckLogs!B2" is on the CheckLogs sheet and is the customer code field. I'm just not sure how you loop if the customer code in B1 doesn't equal the customer code in CheckLogs!B2 and run through the formula again.

## Standard Deviation And Nested If Statement

Oct 15, 2009

I have a sheet of data in which Column A contains a list of sales agents names and Column B contains their results against their KPIs. All the data is terribly skewed due to new metrics so I have been tasked with attributing 'ranking band' to their performance, i.e. very low, low, medium, high, very high.

I have calculated the average and standard deviation for the list of data, but now I need to calculate which ranges will fall under which ranking band, e.g. very low is less -18%, low is greater than 18% but less than 80%, etc.

I also need to come up with a nested if statement next to each of the sales agents so it returns what ranking brand they are on based on their performance. Sample sheet attached. EDIT - attachment on post #4.

## Match Function Nested In An If Statement

Dec 9, 2009

I have multiple sheets within one Excel file. Each sheet is structured the same way. Column B lists Client's last names, which differ from sheet to sheet, though some clients may be repeated in several tabs. I have a column K which displays either the number 1 or 0. This is consistent between sheets.

I have created a formula that will look at the last name in a specific cell in column B of sheet 2 (FY 07) and search sheet 1 (FY 06) column B for the same last name.

=IF(MATCH(\$B5,'FY 06'!\$B\$5:\$B\$24,0),1,0)

If the same last name exists and if column K of sheet 2 and sheet 1 display a "1", I want it to place a 0 in the formula cell.

So, if there is a client that is in both sheets and has a "1" in both columns K of each sheet, I want the formula to let me know.

## Nested If (and) Statement - Operating Leases

Dec 5, 2008

I am currently working on doing some operating lease schedule. I send the info to the field and people fill out the information such as the term of the lease and payment. Then I need to review the terms of the lease and if the term is after 8/31/09 then the lease is classified as long term thus I need to compute the payments until the lease expires. Currently this process is done manually and people have to go and calculate payment by payment which just makes it hard for me to review all the spreadsheets that we get. In the past this process takes about three days to review but I know there is a faster way.

I am attaching what I have created and I put some comments in the worksheet to better explain.

## Converting Nested If Statement Into VBA Code?

Mar 27, 2014

I'm trying to convert my nested if statement below into vba code.

=IF(L27=15,"15+", IF(AND(L27>=5,L27