I have a ss that has item descriptions, quantities and pricing.
Item descriptions are identified by a letter (a, b, c, etc) and in cells C20:c32. These are selected by drop down box. Item quantities are in cells E20:E32.
I want to evaluate cells C20:C32 and determine what letter is chosen. If A is selected in any cell C20:c32 I want to count the quantities for A in cells E20:E32. I can't quite figure out how to do this.
I think the problem is the order in which I have the "next" loops. I would like to evaluate the if statement below over a range of cells
Sub Analysis()
Dim i As Integer
Dim x As Integer
Dim y As Integer
Dim k As Integer
Dim TheLast As Integer
TheLast = Sheets("Name").Range("c" & Rows.Count).End(xlUp).Row
For i = -7 To -26 Step -1
For x = 24 To 43
For y = 14 To 43
For k = 16 To TheLast.................
I am trying to perform a count statement in VBA as below, with the 1st Evaluate I get the correct response, however with the second option it shows a 0. The variable is obtaining the correct values as per the example of 6017Complete, this is proven with the MsgBox
VB:
Dim TillNo As String
TillNo = Target.Offset(, -1) & Target.Offset(, 0) & "Complete"
MsgBox "Till Number is" & TillNo
Target.Offset(, 10) = Evaluate("COUNTIF(C3:C123,""6017Complete"")")
Target.Offset(, 11) = Evaluate("COUNTIF(C3:C123,TillNo)")
I am trying to use an If statement and wanting to evaluate another formula.
The formula is as follows: =IF(B6>=7,Table!M16,Table!M47) where B6 =REPLACE(D24,1,3,"") which returns an integer. In this case it is 6.
Unfortunately it doesn't process the formula value correctly in the If statement unless the reference cell is hard coded with the integer. Is there a way to force the formula to evaluate the value of the cell formaula first before doing the If comparison?
how to shift data in a column down multiple rows while in an IF statement. I am assuming you cannot just simply repeat the insert cell formula.
Here is my code - it's ugly but it was working when I just needed it to move down one cell:
lastrow = Range("A2").End(xlDown).Row
For i = 2 To lastrow
Range("B" & i).Select
If Range("B" & i).Value = Range("B" & i).Offset(-1, 1).Value Then
[Code].....
I'm after a formula that will look at a number of cells(that are not in a range) with the word "C" and if they all = "C" then I want the cell to come back with the result "yes" otherwise "no".
View 12 Replies View RelatedI need to see if it is possible to set up an IF statement that can pull information from cells based on the results already available in those cells.
ABCDEFGHIJKLM1Non FeaturedGoodGoodIdentical IMEIsGoodNeeds RLM NumGoodGoodGoodChk DOA BoxGood32Non FeaturedNo ExchangeGoodGoodGoodNeeds RLM NumGoodGoodGoodChk DOA BoxGood23
What I need is a formula in cell M1 that will check each cell B1 thru K1 for the data "Good". If it does not equal "Good", then I need the checks true/false value(s) to show the reason shown in the other cells.
In other words, for row 1, i need a formula where the outcome would be "Identical IMEIs" because D1 is the first box in the set that does not equal "Good". Then if D1 was corrected to "Good", the outcome would then be "Needs RLM Num".
I tried to do it in sections such as {=IF(B7"Good",B7, then the next check )} but the number of statements exceeds the number of IF statements that can be nested. And I really need the formula to fit in one cell.
Suppose I have a table with a collection of "Top Ten" rankings for something. For example, suppose I have rankings from five "sources" for the Top Ten Ethnic Cooking. For simplicity, I'll show the top 5 here:
Rank
Source A
Source B
Source C
[Code]....
I'd like a way to calculate some sort of average ranking. I have two problems: (1) I don't know what the formula should be and (2) I don't know how to implement it in Excel.
When using watch window to watch a formula that has multiple formula's in it, is there a way to see the result of 1 formula within the big formula?
E.g. say you have:
= SUMIF(A1:A11,"207",B1:B11)/COUNTIF(A1:A11,"207")
And you put a watch on that, but in watch window it shows the result of the whole formula, say if you want to watch only the SUMIF part?
Im using Excel 2003 by the way.
I want a message to show up if I have any of 6 selected cells empty? It basically serves as a reminder to fill in all required cells in a sheet that may be located in different cells. How can I write a formula in one cell that will look at all source cells and tel me that some are empty?
NameAgeLocation
Joe******
HeightWeightTime
******3 PM
Formula Here to verify all filled in.
Ok, this should be an easy one. I have a formula that one of the functions needs to check if certain cells are blank.
For example; I want to check if A2, B2 and C2 are blank.
Currently, the only thing that seems to work is,=IF(OR(ISBLANNK(A2),ISBLANK(B2),ISBLANK(C2)),"PASS","FAIL")
This is just a piece part of the entire formula and I have to evaluate the data based on multiple criteria. The ISBLANK() portion has to be able to evaluate at least 15 cells. Is there a way to evaluate the cells all at once instead of typing out ISBLANK() over and over. I have tried everything I can think of in regards to syntax.
I am trying to do this preferably not in a macro if possible. Basically I have a monthly metrics spreadsheet that pulls it's values from a data entry sheet. I setup the display sheet so that if there's no data for the month the cell is blank in order to avoid errors. So, now what I want is one cell that will update and tell me if the last month's metric was good or bad. So, I am trying to create a cell formula that will be able to find the last row with data. In this case it would be the row corresponding to September's data, then evaluate the value in that cell to see if it's above or below 90% = 0.90 in this case.
View 6 Replies View RelatedI need a nudge in the right direction here. I have found several examples on the board that have spawned some ideas but need a little more help.
I am looking to enter variables into 2 columns A and B and then run these variables through an expression.
I have already done basic cell math and want it to be cleaner by using VBA to run the calcs and then spit the answers back into the spreadsheet.
I think I have an idea as to how it need to function but do not know the exact commands to make it efficient.
tell me which operator works in VBA the way the OR operator works in functions? I want to write an IF statement that will evaluate whether a variable is equal to any of the three punctuation marks ".", "?", or "!". But I'm not sure how to code it. I attempted the following:
View 2 Replies View RelatedI am looking for an IF statement that would leave a balance cell blank if both the revenue and expense cells are blank, otherwise a formula would be calculated.
View 8 Replies View RelatedI am trying to create a formula which looks in 1 cell to determine 'IF' it states either "BUTT CUT" or "DIE CUT" and then does a VLOOKUP in a table array for each which ever column relates to asnwer to 'IF statement.
This is as far as I have got but even this won't work:
=IF(I15="BUTT CUT",=VLOOKUP(J15,V13:Z22,2,FALSE))
I'm looking to work out an IF statement based on a series of dates entered to give 1 of 3 possable outcomes. Where:
A1: todays date (exmaple =NOW())
B1: due date (exmaple 10/02/09)
C1: completion date (example 12/02/09)
D1: status (overdue, outstanding or completed)
D1: =IF(A1>B1,"overdue",IF(A1<B1,"outstanding",IF(C1<=>A1 & B1,"completed")))
I know the last part is totally wrong (symbols arranged in that manner), but to clarify i would like the date entered in C1 to override the other statements in the fomula to make it read "completed". If no date is entered in C1 then the formula will return either "overdue" or "outstanding" depending on the other dates in A1 and B1.
How do I count the number of cells that have a value greater than 0 in a range of cells?
View 2 Replies View RelatedI am trying to have a cell in sheet "Summary" count the number of cells in column DX of sheet "Analyses" that are greater than 0, provided that the value in column A of "Analyses" corresponds with the value in B8 of sheet "Summary."
(In "Analyses," there are 106 subjects, each taking up 64 rows. So, columns 1-64 correspond to Subject 1, columns 65-128 correspond to subject 2, etc. In column DX, each subject has 64 values that are either 0 or greater than 0. In "Summary," each subject has one row that summarizes the 64 trials. I want a single cell in the "Summary," sheet to reflect the number of times each subject produces a value greater than 0 in column DX of "Analyses.") I tried using this formula, but it did not work correctly:
=COUNTIF(IF(Analyses!$A$1:$A$10000=Summary!B8,Analyses!$DX$1:$DX$10000,""),">0")
(Summary!B8 = 1, so I am trying to calculate the number of values in DX that are greater than 0 only for subject 1.) When I press enter, this yields a value of 384. This is impossible, given that subject 1 only has 64 possibilities of yielding a value greater than 0. Subject 1 has 2 values in column DX that are greater than 0. I tried making this an array formula by pressing Shift+Ctrl+Enter, and that just gives me a #VALUE! error.
I have a spreadsheet that I need some help with coming up with a multiple if statement(or maybe sumifs?) I don't know. Here is what I am wanting to do(In somewhat plain old english)
if c3:c43 = A9 add g4:43 than does the total = h3:43 if so display true else false
I have attached a copy of the spreadsheet.
I have the following columns:
Status (column C), New Status (Column D) and Date Sent (column M)
Status column (C) contains multiple stages of progress status (Being Reviewed, Filed Not, etc)
New Status (D) column is blank (this is where I will enter the formula)
Date Sent (M) has mostly blank cells but some with dates in them
I would like a formula in column D (New Status) which evaluates C (Status).
If C = "Filed Not" AND M is blank, then output "Filed Not - Not Sent"
If C = "Filed Not" AND M has a date in it, then output "Filed Not - Sent"
If C <>"Filed Not" then output whatever data exists in C
I can get each of these to work individually, however, I can't, for the life of me, get them to work into one equation.
I have the following formula entered into cell O4: =IF((AND($K4="1",$B4="1 - C",$I4="open")),(1),(0)). When the three conditions are met in the corresponding cells, I get a "0" returned in cell O4. I would like the formula to return a "1" when all three conditions are met.
View 2 Replies View RelatedI have a formula that looks at 5 columns. If any one of these 5 columns meets the specified criteria, it will "Fail" the row. What I want is, when the row is failed, to display the column that was failed. Well I have that part under control using the following formula.
View 2 Replies View RelatedMy concern is in row 4 and 5 of the attached spreadsheet. The problem is that not all postings for the allocations will take place on or before the date the allocation starts. Therefore, i need a logical formula that builds on what already exists and determines if the "entered" date is > the "start date". and then catches up how far it was behind. Example:
contract 12,000
Contract starts January 1st and ends December 31 (12 Months)
Entered Feb 1
In the January column there chould be zero in feb there should be 2,000 and the rest of the months should be 1,000
I want to say, if B1 = A then the value is 10, if B1 = B then the value is 20, if C then the value is 30 and D the value is 40.
If there are two conditions then I know it would be =if(b1=A,10,0) but this is obviously a bit more complex.
I would like to be able to search a group of cells for particular text,
placing the true of false value in another cell, using this formula;
=IF(ISNUMBER(SEARCH("ACP",A2)),"ACP","XXX")
My reason for this is that I have a large amount of data that I need to
break down. I have a column that is listed similar to below;
OR/ACP
OM/ACT
OR/MTS
O/O
The part before the / is 'system code'
The part after the / is 'module code'
I want to be able to have one additional column for system code and one
additional column for module code, without having to manually go through all
the data and make any amendments to it.
So as a result, (without the correct syntax) with 'S' being the system
Column and 'M' being the module column, what I would like to achieve is;
If cell contains "O/" then S1 = Office but if cell contains "OR/" then S1 =
Office Range but if cell contains "OM/" then S1 = Office Medium
I hope that makes sense.
Obviously repeated for the module column;
If cell contains "/ACP" then M1 = ACP but if cell contains "/ACT" then M1 =
ACT but if cell contains "/O" then M1 = O
I have in cell c40 a data validation list with source equal Royal (=Royal) has been created.
Royal is a namebox that has a defined list of 7 options (6 actual options plus one that says "select via drop down") :
FA4 = Select via Drop Down
FA5 = option 1
FA6 = option 2
FA7 = option 3
FA8 = option 4
FA9 = option 5
FA10 = option 6..............
The concept is that FA5 is associated with a value defined in FB5, FA6 is associated with FB6, so on
What I want to happen is when I select a value via the drop down selection in C40 eg. "Option 1" that in cell D40 the value associated with Option 1 (found in FA5) returns the value found in FB5 ($10).
How do I do this? I have tried a number of "if" statements but no luck.
I was wondering if there is a more beautiful way of this formula
Code:
{=MAX(IF(IF(B14=A1:A12, B1:B12)>IF(B14=A1:A12, C1:C12),IF(B14=A1:A12, B1:B12),IF(B14=A1:A12, C1:C12)))}
A
B
C
1
A
10
10
[Code] ...
Highest B is 80
Dim b As Long
Dim last_rowB As Long
last_rowB = Range("K65536").End(xlUp).Row
For b = last_rowB To 2 Step -1
If Sheets("Main").Cells(b, 11).Value = Sheets("Main").Cells(b + 1, 11).Value & Sheets("Main").Cells(b, 11).Value <> "" Then
Sheets("Main").Cells(b + 1, 11).EntireRow.Delete
End If
Next b
If 2 cells are the same i want to delete the row of the 2nd cell, this works. But i dont want 2 delete cells that are blank, this doesnt work. For some reason it deletes everything in the table.
I've been asked to write a multiple if statement for someone here at work but I've been trying all day with no success. Basically, the OS liabilty in column C cannot exceed £2500. Here is an example inc the expected results............
So in row 1 the expected result is 500, as even though there is a 1000 reserve, 2000 of it has already been paid In row 2 nothing has been paid in column A so the OS liabilty in column C is the reserve up to a max of 2500 In row 3, there is 5000 in reserve, but 100 has been paid so the OS liability in col C must be 2000
In row 4 nothing has been paid in column A so the OS liability is the reserve in column B In row 5 150 has been paid, 150 is in reserve, so 150 is the OS liability
In row 6, 2500 has been paid, but even though there is an amount of 300 in reserve (col B), nothing is expected in OS liability as the 2500 max liability amount has been reached.