Why am I getting a runtime error on the following code:
Code:
If Target.Address = "$E$5" And Target.Value "" Then
Range("E5:G5").Copy
If Sheets("Sheet5").Range("F5").Value = "" Then
Sheets("Sheet5").Range("F5").PasteSpecial xlPasteValues
Else
Sheets("Sheet5").Cells(Rows.Count, "F").End(xlUp).Offset(1, 0).PasteSpecial xlPasteValues
End If
End If
When I select only one cell it's ok but when I select multiple cell to delete it sends me a run-time error '13'.
I have a workbook in Excel that runs some code when it is opened [see below].
It works fine for everybody except one person using Excel 2003 - they get a Run-time error '5' : invalid procedure call or argument message and I cannot figure out why.
I created several macros objects to do simple hide columns, filter on, filter off, etc. type functions, using the Tools / Record Macro feature. Then discovered they won't work in a protected worksheet. Is there a way around this situation, other than turning protection off? Here's an example of the code for one of them, although I get the error or every attempt to perform a macro once the sheet is protected:
I am currently working on a project which at various times does 2 different things. These things are to be done on a "PROTECTED" (UserInterfaceOnly:=True ) worksheet.
The first is a Range.Replace command. The other is a Hyperlinks.Add command.
Now when I'm testing ( typically the worksheet is not protected ) everything works like a champ. But as soon as I protect the sheet the following scenario happens.
1. The replace DOES NOT work. 2. The hypelink.add DOES NOT work.
when the sheet is protected it ends up throwing a runtime error ( 1004 ) "Protected Sheet error" the real odd thing about this is that it doesn't throw the error on the command itself. On the hyperlink the error happens about 3 command further along in the flow............
I am converting Excel Templates which were developed in office 97 to Excel 2003.The templates are running fine in office 97 ,but when I run the same template in off 2003 I get the error "Run time Error Code 1004 : Application or Object Defined " and when I tried to debug the cursor is pointing to a cell which contains a formula which add multiple cell values.Can any one throw some light on this why the template which works fine on office 97 is not working in office 2003?
I am trying to run code to update Excel Worksheet from the value in a cell.
The code is -
Sub upDateSheetNames()
'Standard Module code, like: Module1. Dim ws As Object
For Each ws In Worksheets [Code] ......
Although it does actually work i.e. populates the worksheets with the correct values when I run the code a dialogue box appears indicating - "Run-Time Error '1004' Application Defined or Object Defined Error"
When i select the 'Debug' option the "ws.Name = ws.Range("Q1").Value" line is highlighted.
I wrote the below code, the error seems to be occurring on the ActiveSheet.Name line. At this line the debugger is giving the runtime error.
Sub ListWorkSheetNames() Dim Sheetnames Sheetnames = Sheets.Count Sheets.Add ActiveSheet.Name = 'SheetList' Sheets(SheetList).Move after:=Sheets(Sheetnames + 1) For i = 1 To Sheetnames Range(A & i) = Sheets(i).Name Next i End Sub
Using excel 2003, Workbook has several sheets, all sheets are protected workbook is not. I have my cells containing formulas locked, I have unlocked the other cells that require input of various data. When the user goes to type in a "unlocked" cell, (to over write the now obsolete data) it will not allow the user to delete the data, the curser remains a cross and the formula bar or the cell itself will now allow any changes.
I have double checked that the cells are unlocked. I can enter data after the last entry in the unlocked row and or column, but I want to be able to "cut or delete the data that is no longer need and begin entering data from the beginning cell of choice. I want to copy this "old" data to an archive sheet, but it will now allow me to select it.
Example: I have 6 columns starting, (a to f) the formulas are in columns e and f and start at row 4 These columns are locked and hidden. Columns a,b,c and d are unlocked for user input. All data is started from A5 which I want it to start from each time the old data is deleted and new data entered. If I place my curser on any of the cells in the e and f rows, the cursor remains a cross which is what I expect it to do, but columns a to d are doing the same thing, they are acting as if they are locked OR atleast those cells in the a to d areas which have existing data, as I can enter below.
in Master sheet i have defined values in list Column D & F
Column D has COUNTRY as heading and country Names below it
Column F has CITY and city list
I am column A i have 2 data list
as
COUNTRY CITY
I have dropdown in excel sheet (SHEET1) in Column K populated with data from MASTER in Column A ie city & country
When I select city i need Dropdown in column L to be populated with Citylist from MASTERS COLUMN F and if city seleced i need to get data from column D
Run-time error '-2147467259 (80004005)': An unexpected token ""20*"" was found following "1' AND PERIOD = LIKE*. Expected tokens may include: "". SQLSTATE=42601 code died at RS.Open SQL, CN ///////////////////////////////////////////////////////// Sub GET_OSI Dim sn as String, osi as string, saposi As String
I am writing macros for a pop up calender in excel 2010. I followed instructions in the link below but at the testing step # 7 it returned; 'run time eror 424 object required'. It's my first time writing macros.
Code: Private Sub Workbook_Open() Form1.Show End Sub
It has worked perfectly for about 2 weeks, well now when I go to open the workbook it gives me the debug error of Run Time error 424 Object Required. I last ran this today at about 8 a.m. no errors, but now about 4 hours later, it is bugging out. What is causing this?
I am running excel 2007 thin client. in attempting to refresh a query, I have encountered this error message: "run time error 1004 Incomplete datasource". The four line macro is as follows:
Code: Sub RefreshFamily() Sheets("Family").QueryTables("Family_refresh").EnableRefresh = True Sheets("Family").QueryTables("Family_refresh").Refresh BackgroundQuery:=True Sheets("Family").QueryTables("Family_refresh").EnableRefresh = False End Sub
Where the named range "Family refresh" is defined as :
The following script runs fine the first time I click the command button on an Access form but after I close the Excel workbook and click the command button again to edit a new spreadsheet, I get the follow error message:
Run-time error '1004': Method "Columns' of object'_Global failed.
It fails here:
Code: Columns("H:H").Select
The script is being run from Access 2007 and is opening a spreadsheet in Excel 2007 (but using xls extension)
Code: Private Sub IdahotoExcel_Click() Dim dlg As FileDialog Dim idahofile As String
Trying to be slick with my macro I have 2 sheets collecting data in a workbook. I am attempting to send as attachments only those 2 sheets. I am getting an error at the following space within the code. How do I get around this?
Code: Sub Send_to_Me()
' Send_to_Me Macro Dim objTemp As Object Dim FileExt As String Dim TempFileName As String Dim FileFullPath As String Dim FileFormat As Variant
[Code] ......
This is the line that I get with the message above. It is only 2 sheets. Excel 2010 Windows 2007
I have been given a macro recorded on a mac and it works fine with Mac Excel 2011. Unfortunately, I need to make it to work on a windows machine, but it comes up with an error message "macro unable to set width property of the window class. Run-time error 1004". When I press debug it takes me to the line .Width = 1456.
Below is the chunk of the code that becomes highlighted when pressing debug.
With ActiveWindow .Width = 1456 .Height = 795 End With
I have a VBA excel file that pulls data from a CSV file downloaded from a link. I format this data into a table through excel and then copy it over to Outlook. This is where the problem is. I get a runtime error 4065 for "file is locked for editing".
1.) I have excel 2007 and when I recorded the macro yesterday it worked just fine, but today it's coming up with the box to update values. The macro is set to open up the vendor assignment sheet and do a vlookup against the clerk and then return the information to the original sheet and then copy paste special values. 2.) Today it's also doing the calculating thing in the corner using 2 processors which it has not done before. 3.) Run-time error '1004': PasteSpecial method of Range class failed.
[code]' Keyboard Shortcut: Ctrl+r ' Dim OriginalSheet As Workbook Set OriginalSheet = ActiveWorkbook Columns("B:B").Cut With Columns("A:A") .Insert Shift:=xlToRight End With
I am using this code (below) to hide certain rows or columns depending on what number is entered. Everything is working fine and I am at the point where I would like to share this excel sheet with others but I would like to lock certain cells so that others cannot alter the formulas. As soon as I lock the cells and then enter values into the unlocked cells, I get the "run-time error '1004': Unable to set the Hidden property of the Range class".
I am using excel 2010 x64.
Code: Private Sub Worksheet_Change(ByVal Target As Range)If Not Intersect(Target, Range("B3")) Is Nothing Then If Range("B3").Value = 0 Then Columns("G:P").EntireColumn.Hidden = True Else If Range("B3").Value = 1 Then Columns("H:P").EntireColumn.Hidden = True
but my code is running in a loop and i can see that atleast 20 buttons were added and it fails to select when it try to add this iteration. It is completely confusing me.
I also notice that when it fails, on select method .. the button was actually added to the sheet with caption/name as "Button 65536" but then fails to select it. What makes the select to fail after adding the button? Could there be anything special with Button 65536?
Is there any better way to code the adding button and setting action and name for excel 2007?
note before entering the loop i am deleting all the shapes with myShape.Delete which name matches "btRun"
I also want to highlight that i don't have 65536 rows in my sheet. I just have 200 rows. and when this error happens it is on row 150 so firstly i wonder why it is naming the button as Button 65536. I would assume it will start with 1 and go on increments.
What makes excel to fail to select an added button in VBA?
I'm using Excel 2013 and I'm getting an issue in vba I can't figure out. (This is something I've done several dozen time before) But everytime I try to copy a sheet in a workbook,
The macro I'm writing (Excel 2010) is a loop that inserts a column based on a variable location, enters in a formula in the first cell, enters another formula in cell 2, then should fill that second formula to the last row, then keep going until the loop ends. There is always a chance that there will be blank cells to the left and right so I didn't use xldown. I've tried writing in multiple ways, but I keep getting the error.
Code: Sub colfrmadd() Range("A1").CurrentRegion.Select colcnt2 = Selection.Columns.Count
I've been using a macro successfully for the last couple of years, but this morning when I went to use it, it decided to fail. I have a workbook which contains various spreadsheets. The macro that has failed performs the following tasks:
1. It copies a list of email addresss from an external workbook to a sheet in the current workbook (still works) 2. It copies the referral sheet I want to send to a new file, and saves it with an appropriate filename to an appropriate folder (still works) 3. The macro then creates an email with a standard subject line, attaches the new worksheet and emails it to each of the addresses as above (broken)
The error message is from Microsoft Visual Basic. "Run-time error '1004': Mail system failure. Check your mail installation."
I'm guessing there is a setting somewhere in Excel that has changed as part of an update.
I've been through a number of the options in the developer menu to remove any obvious restrictions (& reopened excel afterwards), but so far it hasn't resolved the problem.
For what it's worth, here is the macro code.
With Application .EnableEvents = False .ScreenUpdating = False End With Run "PullInSheet1" Dim oldbook As String
[Code] .......
In case you're wondering about the pullinsheet code, I'll add it below - but I probably grabbed it from this forum a couple of years ago (like some of the above) & just made some changes.
Code: Sub PullInSheet1() Dim AreaAddress As String '''''' Sheet11.UsedRange.Clear Dim ClRange As String ClRange = "= 'L:ADMINEMPLOY SERVICES" _
[Code] ........
There are a couple of things I've wanted to do to improve the macro, but I couldn't justify the need to spend time working it out (since writing spreadsheets isn't really my job). Since it's broken at the moment, I can...
1. I'd like to create a subject line that reflects the name of the person being referred. For some reason though, anything other than text in the cell reference caused an error for me. eg, I tried using concatenate to create my subject line, but it didn't work.
2. I'd like the copied sheet to contain all of the formatting of the original sheet. Presumably there is a paste option that will do this and I just picked the wrong one.
The mailsystem we use is Groupwise 8. I couldn't find any settings in that program that have been changed, or that I could change.
I should change the extension from xls to xlsx in the code since I'm using Excel 2010 (but changing it doesn't fix the problem).
I'm using 2003 (I know!) version & I can't open excel files directly by clicking on them. I get an "error in sending command" message. I can circumvent problem by opening Excel & then opening the relevant file, but this sometimes causes me problems.
